From: Gilbert Wu <Gilbert.Wu@xxxxxxxxxxxxx>
Add device attribute sas_ncq_prio_enable for IO utility
to enable SATA NCQ priority support and recognize IO priority in SCSI
command and then pass IO priority information to controller firmware.
This device attribute works only when device has NCQ priority support
and controller firmware can handle IO with NCQ priority attribute.
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Signed-off-by: Gilbert Wu <Gilbert.Wu@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
drivers/scsi/smartpqi/smartpqi.h | 2 +
drivers/scsi/smartpqi/smartpqi_init.c | 119 ++++++++++++++++++++++++++++++++-
2 files changed, 117 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index aac88ac0a0b7..f192745ee488 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -1127,6 +1127,8 @@ struct pqi_scsi_dev {
u8 box[8];
u16 phys_connector[8];
u8 phy_id;
+ u8 ncq_prio_enable;
+ u8 ncq_prio_support;
bool raid_bypass_configured; /* RAID bypass configured */
bool raid_bypass_enabled; /* RAID bypass enabled */
u32 next_bypass_group;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index d34e49caa3f3..ad9fa1628a69 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -68,7 +68,7 @@ static int pqi_submit_raid_request_synchronous(struct pqi_ctrl_info *ctrl_info,
static int pqi_aio_submit_io(struct pqi_ctrl_info *ctrl_info,
struct scsi_cmnd *scmd, u32 aio_handle, u8 *cdb,
unsigned int cdb_length, struct pqi_queue_group *queue_group,
- struct pqi_encryption_info *encryption_info, bool raid_bypass);
+ struct pqi_encryption_info *encryption_info, bool raid_bypass, bool io_high_prio);
static int pqi_aio_submit_r1_write_io(struct pqi_ctrl_info *ctrl_info,
struct scsi_cmnd *scmd, struct pqi_queue_group *queue_group,
struct pqi_encryption_info *encryption_info, struct pqi_scsi_dev *device,
@@ -1549,6 +1549,7 @@ static void pqi_get_volume_status(struct pqi_ctrl_info *ctrl_info,
device->volume_offline = volume_offline;
}
+#define PQI_DEVICE_NCQ_PRIO_SUPPORTED 0x01
#define PQI_DEVICE_PHY_MAP_SUPPORTED 0x10
static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info,
@@ -1597,6 +1598,10 @@ static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info,
else
device->phy_id = 0xFF;
+ device->ncq_prio_support =
+ ((get_unaligned_le32(&id_phys->misc_drive_flags) >> 16) &
+ PQI_DEVICE_NCQ_PRIO_SUPPORTED);
+
return 0;
}
@@ -3007,7 +3012,7 @@ static int pqi_raid_bypass_submit_scsi_cmd(struct pqi_ctrl_info *ctrl_info,
return pqi_aio_submit_io(ctrl_info, scmd, rmd.aio_handle,
rmd.cdb, rmd.cdb_length, queue_group,
- encryption_info_ptr, true);
+ encryption_info_ptr, true, false);
}
#define PQI_STATUS_IDLE 0x0
@@ -5560,18 +5565,55 @@ static void pqi_aio_io_complete(struct pqi_io_request *io_request,
pqi_scsi_done(scmd);
}
+static inline bool pqi_is_io_high_prioity(struct pqi_ctrl_info *ctrl_info,
+ struct pqi_scsi_dev *device, struct scsi_cmnd *scmd)
+{
+ bool io_high_prio;
+ int priority_class;
+
+ io_high_prio = false;
+ if (device->ncq_prio_enable) {
+ priority_class =
+ IOPRIO_PRIO_CLASS(req_get_ioprio(scsi_cmd_to_rq(scmd)));
+ if (priority_class == IOPRIO_CLASS_RT) {
+ /* set NCQ priority for read/write command */
+ switch (scmd->cmnd[0]) {
+ case WRITE_16:
+ case READ_16:
+ case WRITE_12:
+ case READ_12:
+ case WRITE_10:
+ case READ_10:
+ case WRITE_6:
+ case READ_6:
+ io_high_prio = true;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ return io_high_prio;
+}
+
static inline int pqi_aio_submit_scsi_cmd(struct pqi_ctrl_info *ctrl_info,
struct pqi_scsi_dev *device, struct scsi_cmnd *scmd,
struct pqi_queue_group *queue_group)
{
+ bool io_high_prio;
+
+ io_high_prio = pqi_is_io_high_prioity(ctrl_info, device, scmd);
return pqi_aio_submit_io(ctrl_info, scmd, device->aio_handle,
- scmd->cmnd, scmd->cmd_len, queue_group, NULL, false);
+ scmd->cmnd, scmd->cmd_len, queue_group, NULL,
+ false, io_high_prio);
}
static int pqi_aio_submit_io(struct pqi_ctrl_info *ctrl_info,
struct scsi_cmnd *scmd, u32 aio_handle, u8 *cdb,
unsigned int cdb_length, struct pqi_queue_group *queue_group,
- struct pqi_encryption_info *encryption_info, bool raid_bypass)
+ struct pqi_encryption_info *encryption_info, bool raid_bypass,
+ bool io_high_prio)
{
int rc;
struct pqi_io_request *io_request;
@@ -5589,6 +5631,7 @@ static int pqi_aio_submit_io(struct pqi_ctrl_info *ctrl_info,
put_unaligned_le32(aio_handle, &request->nexus_id);
put_unaligned_le32(scsi_bufflen(scmd), &request->buffer_length);
request->task_attribute = SOP_TASK_ATTRIBUTE_SIMPLE;
+ request->command_priority = io_high_prio;
put_unaligned_le16(io_request->index, &request->request_id);
request->error_index = request->request_id;
if (cdb_length > sizeof(request->cdb))
@@ -7121,6 +7164,71 @@ static ssize_t pqi_raid_bypass_cnt_show(struct device *dev,
return scnprintf(buffer, PAGE_SIZE, "0x%x\n", raid_bypass_cnt);
}
+static ssize_t pqi_sas_ncq_prio_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pqi_ctrl_info *ctrl_info;
+ struct scsi_device *sdev;
+ struct pqi_scsi_dev *device;
+ unsigned long flags;
+ int output_len = 0;
+
+ sdev = to_scsi_device(dev);
+ ctrl_info = shost_to_hba(sdev->host);
+
+ spin_lock_irqsave(&ctrl_info->scsi_device_list_lock, flags);
+
+ device = sdev->hostdata;
+ if (!device) {
+ spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+ return -ENODEV;
+ }
+
+ output_len = snprintf(buf, PAGE_SIZE, "%d\n",
+ device->ncq_prio_enable);
+ spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+
+ return output_len;
+}
+
+static ssize_t pqi_sas_ncq_prio_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pqi_ctrl_info *ctrl_info;
+ struct scsi_device *sdev;
+ struct pqi_scsi_dev *device;
+ unsigned long flags;
+ u8 ncq_prio_enable = 0;
+
+ if (kstrtou8(buf, 0, &ncq_prio_enable))
+ return -EINVAL;
+
+ sdev = to_scsi_device(dev);
+ ctrl_info = shost_to_hba(sdev->host);
+
+ spin_lock_irqsave(&ctrl_info->scsi_device_list_lock, flags);
+
+ device = sdev->hostdata;
+
+ if (!device) {
+ spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+ return -ENODEV;
+ }
+
+ if (!device->ncq_prio_support ||
+ !device->is_physical_device) {
+ spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+ return -EINVAL;
+ }
+
+ device->ncq_prio_enable = ncq_prio_enable;
+
+ spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+
+ return strlen(buf);
+}
+
static DEVICE_ATTR(lunid, 0444, pqi_lunid_show, NULL);
static DEVICE_ATTR(unique_id, 0444, pqi_unique_id_show, NULL);
static DEVICE_ATTR(path_info, 0444, pqi_path_info_show, NULL);
@@ -7128,6 +7236,8 @@ static DEVICE_ATTR(sas_address, 0444, pqi_sas_address_show, NULL);
static DEVICE_ATTR(ssd_smart_path_enabled, 0444, pqi_ssd_smart_path_enabled_show, NULL);
static DEVICE_ATTR(raid_level, 0444, pqi_raid_level_show, NULL);
static DEVICE_ATTR(raid_bypass_cnt, 0444, pqi_raid_bypass_cnt_show, NULL);
+static DEVICE_ATTR(sas_ncq_prio_enable, 0644,
+ pqi_sas_ncq_prio_enable_show, pqi_sas_ncq_prio_enable_store);
static struct attribute *pqi_sdev_attrs[] = {
&dev_attr_lunid.attr,
@@ -7137,6 +7247,7 @@ static struct attribute *pqi_sdev_attrs[] = {
&dev_attr_ssd_smart_path_enabled.attr,
&dev_attr_raid_level.attr,
&dev_attr_raid_bypass_cnt.attr,
+ &dev_attr_sas_ncq_prio_enable.attr,
NULL
};
