[PATCH 12/18] smartpqi: speed up RAID 10 sequential reads

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>

Use all data disks for sequential read operations.

Testing discovered inconsistent performance on RAID 10 volumes
when performing 256K sequential reads.

The driver was only using a single tracker to determine which physical
drive to send a request to for AIO requests.

Change the single tracker (next_bypass_group) to an array of trackers
based on the number of data disks in a row of the RAID map.

Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Signed-off-by: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/smartpqi/smartpqi.h      |    5 +++--
 drivers/scsi/smartpqi/smartpqi_init.c |    6 +++---
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 4f6e48854c66..826c4001bac2 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -918,7 +918,8 @@ union pqi_reset_register {
 #define PQI_MAX_TRANSFER_SIZE			(1024U * 1024U)
 #define PQI_MAX_TRANSFER_SIZE_KDUMP		(512 * 1024U)
 
-#define RAID_MAP_MAX_ENTRIES		1024
+#define RAID_MAP_MAX_ENTRIES			1024
+#define RAID_MAP_MAX_DATA_DISKS_PER_ROW		128
 
 #define PQI_PHYSICAL_DEVICE_BUS		0
 #define PQI_RAID_VOLUME_BUS		1
@@ -1125,7 +1126,7 @@ struct pqi_scsi_dev {
 	u8	ncq_prio_support;
 	bool	raid_bypass_configured;	/* RAID bypass configured */
 	bool	raid_bypass_enabled;	/* RAID bypass enabled */
-	u32	next_bypass_group;
+	u32	next_bypass_group[RAID_MAP_MAX_DATA_DISKS_PER_ROW];
 	struct raid_map *raid_map;	/* RAID bypass map */
 	u32	max_transfer_encrypted;
 
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 8bd4de6306db..18c695202c52 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -2058,7 +2058,7 @@ static void pqi_scsi_update_device(struct pqi_ctrl_info *ctrl_info,
 		sizeof(existing_device->box));
 	memcpy(existing_device->phys_connector, new_device->phys_connector,
 		sizeof(existing_device->phys_connector));
-	existing_device->next_bypass_group = 0;
+	memset(existing_device->next_bypass_group, 0, sizeof(existing_device->next_bypass_group));
 	kfree(existing_device->raid_map);
 	existing_device->raid_map = new_device->raid_map;
 	existing_device->raid_bypass_configured =
@@ -2963,11 +2963,11 @@ static int pqi_raid_bypass_submit_scsi_cmd(struct pqi_ctrl_info *ctrl_info,
 		if (rmd.is_write) {
 			pqi_calc_aio_r1_nexus(raid_map, &rmd);
 		} else {
-			group = device->next_bypass_group;
+			group = device->next_bypass_group[rmd.map_index];
 			next_bypass_group = group + 1;
 			if (next_bypass_group >= rmd.layout_map_count)
 				next_bypass_group = 0;
-			device->next_bypass_group = next_bypass_group;
+			device->next_bypass_group[rmd.map_index] = next_bypass_group;
 			rmd.map_index += group * rmd.data_disks_per_row;
 		}
 	} else if ((device->raid_level == SA_RAID_5 ||





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux