Re: Very slow writes with mptsas

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Matthew Jacob wrote:
> The FreeBSD problem was fixed by Scott Long a couple of days ago by
> doing some cut through SAS stuff that enabled Write Cache for SATA
> drives. Why LSI-Logic couldn't just blitheringly synthesize mode page
> 8 is beyond me, but okay.
> 
> I dunno whether the issue here is the same one Scott tackled- probably
> given the messages. Eric- you listening in on this?

Matt,
Just in case Eric doesn't answer, I suspect if the
HBA firmware can be upgraded (from Dell or LSI?) then
WCE (write cache enable) in the caching mode page
will be supported. It is one of the few mode page
settings that is required to be implemented in SAT.

The other field that should be changeable is DRA
(disable read ahead). Both work on my LSI SAS HBA.

Doug Gilbert

-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux