To distinguish between resets sent by the SCSI mid-level error handling and newly introduced devices (LUs), this Unit Attention: power on, reset, or bus reset occurred [0x29,0x0] has been subdivided into that UA for the reset case and this new UA: power on occurred [0x29,0x1] for the new device (LU) case. This makes debug a little easier to follow when it is turned on (e.g. 'echo 0x1 > opts'). Bump driver version number. Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx> --- drivers/scsi/scsi_debug.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index c6798d991fbe..85dd110c2b65 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -7,7 +7,7 @@ * anything out of the ordinary is seen. * ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * - * Copyright (C) 2001 - 2020 Douglas Gilbert + * Copyright (C) 2001 - 2021 Douglas Gilbert * * For documentation see http://sg.danny.cz/sg/scsi_debug.html */ @@ -61,8 +61,8 @@ #include "scsi_logging.h" /* make sure inq_product_rev string corresponds to this version */ -#define SDEBUG_VERSION "0190" /* format to fit INQUIRY revision field */ -static const char *sdebug_version_date = "20200710"; +#define SDEBUG_VERSION "0191" /* format to fit INQUIRY revision field */ +static const char *sdebug_version_date = "20210520"; #define MY_NAME "scsi_debug" @@ -84,6 +84,7 @@ static const char *sdebug_version_date = "20200710"; #define INSUFF_RES_ASC 0x55 #define INSUFF_RES_ASCQ 0x3 #define POWER_ON_RESET_ASCQ 0x0 +#define POWER_ON_OCCURRED_ASCQ 0x1 #define BUS_RESET_ASCQ 0x2 /* scsi bus reset occurred */ #define MODE_CHANGED_ASCQ 0x1 /* mode parameters changed */ #define CAPACITY_CHANGED_ASCQ 0x9 @@ -197,13 +198,14 @@ static const char *sdebug_version_date = "20200710"; * priority. The UA numbers should be a sequence starting from 0 with * SDEBUG_NUM_UAS being 1 higher than the highest numbered UA. */ #define SDEBUG_UA_POR 0 /* Power on, reset, or bus device reset */ -#define SDEBUG_UA_BUS_RESET 1 -#define SDEBUG_UA_MODE_CHANGED 2 -#define SDEBUG_UA_CAPACITY_CHANGED 3 -#define SDEBUG_UA_LUNS_CHANGED 4 -#define SDEBUG_UA_MICROCODE_CHANGED 5 /* simulate firmware change */ -#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6 -#define SDEBUG_NUM_UAS 7 +#define SDEBUG_UA_POOCCUR 1 /* Power on occurred */ +#define SDEBUG_UA_BUS_RESET 2 +#define SDEBUG_UA_MODE_CHANGED 3 +#define SDEBUG_UA_CAPACITY_CHANGED 4 +#define SDEBUG_UA_LUNS_CHANGED 5 +#define SDEBUG_UA_MICROCODE_CHANGED 6 /* simulate firmware change */ +#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 7 +#define SDEBUG_NUM_UAS 8 /* when 1==SDEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this * sector on read commands: */ @@ -1086,6 +1088,12 @@ static int make_ua(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) if (sdebug_verbose) cp = "power on reset"; break; + case SDEBUG_UA_POOCCUR: + mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC, + POWER_ON_OCCURRED_ASCQ); + if (sdebug_verbose) + cp = "power on occurred"; + break; case SDEBUG_UA_BUS_RESET: mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC, BUS_RESET_ASCQ); @@ -5007,7 +5015,7 @@ static struct sdebug_dev_info *find_build_dev_info(struct scsi_device *sdev) open_devip->lun = sdev->lun; open_devip->sdbg_host = sdbg_host; atomic_set(&open_devip->num_in_q, 0); - set_bit(SDEBUG_UA_POR, open_devip->uas_bm); + set_bit(SDEBUG_UA_POOCCUR, open_devip->uas_bm); open_devip->used = true; return open_devip; } -- 2.25.1
