Re: kexec and aacraid broken

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/30/07, Salyzyn, Mark <mark_salyzyn@xxxxxxxxxxx> wrote:
I believe this issue is a result of the aacraid_commit_reset patch (as
posted for scsi-misc-2.6, enclosed to permit testing) not yet propagated
to the 2.6.22-rc3 tree.

This is the adapter taking longer than 3 minutes to start after a reset.
I seriously doubt either of these patches suggested below will have an
affect. And if they do, they are not root cause, one reduces the chances
that the card will be reset during initialization (thus applied would
likely mitigate this problem), the other prevents a panic when the
Adapter is reset (removed, would result in dogs and cats sleeping with
each other).

Please use kernel parameter aacraid.startup_timeout=540 (merely larger
than the default 180 seconds) when spawning the kexec or see if the
aacraid_commit_reset.patch resolves the issue to confirm my hunch.


aacraid_commit_reset.patch is in the mainline already.

YH
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux