[PATCH 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>

Most places that use asd_sas_port->phy_list are protected by spinlock
asd_sas_port->phy_list_lock, but there are some places which lack of it
in hisi_sas driver, so add it in function hisi_sas_refresh_port_id() when
accessing asd_sas_port->phy_list. But it has a risk that list mutates while
dropping the lock at the same time in function
hisi_sas_send_ata_reset_each_phy(), so read asd_sas_port->phy_mask
instead of accessing asd_sas_port->phy_list to avoid the risk.

Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Acked-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 305d6282845a..44c888e0afd7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1427,11 +1427,13 @@ static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
 		sas_port = device->port;
 		port = to_hisi_sas_port(sas_port);
 
+		spin_lock(&sas_port->phy_list_lock);
 		list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el)
 			if (state & BIT(sas_phy->id)) {
 				phy = sas_phy->lldd_phy;
 				break;
 			}
+		spin_unlock(&sas_port->phy_list_lock);
 
 		if (phy) {
 			port->id = phy->port_id;
@@ -1508,22 +1510,25 @@ static void hisi_sas_send_ata_reset_each_phy(struct hisi_hba *hisi_hba,
 	struct ata_link *link;
 	u8 fis[20] = {0};
 	u32 state;
+	int i;
 
 	state = hisi_hba->hw->get_phys_state(hisi_hba);
-	list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el) {
+	for (i = 0; i < hisi_hba->n_phy; i++) {
 		if (!(state & BIT(sas_phy->id)))
 			continue;
+		if (!(sas_port->phy_mask & BIT(i)))
+			continue;
 
 		ata_for_each_link(link, ap, EDGE) {
 			int pmp = sata_srst_pmp(link);
 
-			tmf_task.phy_id = sas_phy->id;
+			tmf_task.phy_id = i;
 			hisi_sas_fill_ata_reset_cmd(link->device, 1, pmp, fis);
 			rc = hisi_sas_exec_internal_tmf_task(device, fis, s,
 							     &tmf_task);
 			if (rc != TMF_RESP_FUNC_COMPLETE) {
 				dev_err(dev, "phy%d ata reset failed rc=%d\n",
-					sas_phy->id, rc);
+					i, rc);
 				break;
 			}
 		}
-- 
2.33.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux