[PATCH v2 2/2] scsi: pm80xx: Add pm80xx_mpi_build_cmd tracepoint

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pm8001_mpi_build_cmd() prepares and sends all commands to a controller.
Having pm80xx_mpi_build_cmd tracepoint can help us with latency issues.

this patch depends on patch "scsi: pm80xx: Add tracepoints".

Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
Signed-off-by: Changyuan Lyu <changyuanl@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_hwi.c         |  5 +++++
 drivers/scsi/pm8001/pm80xx_tracepoints.h | 28 ++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 124cb69740c6..a63362bdd884 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -42,6 +42,7 @@
  #include "pm8001_hwi.h"
  #include "pm8001_chips.h"
  #include "pm8001_ctl.h"
+ #include "pm80xx_tracepoints.h"
 
 /**
  * read_main_config_table - read the configure table and save it.
@@ -1324,6 +1325,10 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
 	unsigned long flags;
 	int q_index = circularQ - pm8001_ha->inbnd_q_tbl;
 	int rv;
+	u32 htag = le32_to_cpu(*(__le32 *)payload);
+
+	trace_pm80xx_mpi_build_cmd(pm8001_ha->id, opCode, htag, q_index,
+		circularQ->producer_idx, le32_to_cpu(circularQ->consumer_index));
 
 	WARN_ON(q_index >= PM8001_MAX_INB_NUM);
 	spin_lock_irqsave(&circularQ->iq_lock, flags);
diff --git a/drivers/scsi/pm8001/pm80xx_tracepoints.h b/drivers/scsi/pm8001/pm80xx_tracepoints.h
index 84fcfecfd624..5e669a8a9344 100644
--- a/drivers/scsi/pm8001/pm80xx_tracepoints.h
+++ b/drivers/scsi/pm8001/pm80xx_tracepoints.h
@@ -75,6 +75,34 @@ TRACE_EVENT(pm80xx_request_complete,
 		    __entry->running_req)
 );
 
+TRACE_EVENT(pm80xx_mpi_build_cmd,
+	    TP_PROTO(u32 id, u32 opc, u32 htag, u32 qi, u32 pi, u32 ci),
+
+	    TP_ARGS(id, opc, htag, qi, pi, ci),
+
+	    TP_STRUCT__entry(
+		    __field(u32, id)
+		    __field(u32, opc)
+		    __field(u32, htag)
+		    __field(u32, qi)
+		    __field(u32, pi)
+		    __field(u32, ci)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->id = id;
+		    __entry->opc = opc;
+		    __entry->htag = htag;
+		    __entry->qi = qi;
+		    __entry->pi = pi;
+		    __entry->ci = ci;
+		    ),
+
+	    TP_printk("ctlr_id = %u opc = %#x htag = %#x QI = %u PI = %u CI = %u",
+		    __entry->id, __entry->opc, __entry->htag, __entry->qi,
+		    __entry->pi, __entry->ci)
+);
+
 #endif /* _TRACE_PM80XX_H_ */
 
 #undef TRACE_INCLUDE_PATH
-- 
2.34.0.rc1.387.gb447b232ab-goog




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux