Re: [bug report] WARNING: CPU: 1 PID: 1386 at block/blk-mq-sched.c:432 blk_mq_sched_insert_request+0x54/0x178

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 3, 2021 at 7:59 PM Jens Axboe <axboe@xxxxxxxxx> wrote:
>
> On 11/2/21 9:54 PM, Jens Axboe wrote:
> > On Nov 2, 2021, at 9:52 PM, Ming Lei <ming.lei@xxxxxxxxxx> wrote:
> >>
> >> On Tue, Nov 02, 2021 at 09:21:10PM -0600, Jens Axboe wrote:
> >>>> On 11/2/21 8:21 PM, Yi Zhang wrote:
> >>>>>>
> >>>>>> Can either one of you try with this patch? Won't fix anything, but it'll
> >>>>>> hopefully shine a bit of light on the issue.
> >>>>>>
> >>>> Hi Jens
> >>>>
> >>>> Here is the full log:
> >>>
> >>> Thanks! I think I see what it could be - can you try this one as well,
> >>> would like to confirm that the condition I think is triggering is what
> >>> is triggering.
> >>>
> >>> diff --git a/block/blk-mq.c b/block/blk-mq.c
> >>> index 07eb1412760b..81dede885231 100644
> >>> --- a/block/blk-mq.c
> >>> +++ b/block/blk-mq.c
> >>> @@ -2515,6 +2515,8 @@ void blk_mq_submit_bio(struct bio *bio)
> >>>    if (plug && plug->cached_rq) {
> >>>        rq = rq_list_pop(&plug->cached_rq);
> >>>        INIT_LIST_HEAD(&rq->queuelist);
> >>> +        WARN_ON_ONCE(q->elevator && !(rq->rq_flags & RQF_ELV));
> >>> +        WARN_ON_ONCE(!q->elevator && (rq->rq_flags & RQF_ELV));
> >>>    } else {
> >>>        struct blk_mq_alloc_data data = {
> >>>            .q        = q,
> >>> @@ -2535,6 +2537,8 @@ void blk_mq_submit_bio(struct bio *bio)
> >>>                bio_wouldblock_error(bio);
> >>>            goto queue_exit;
> >>>        }
> >>> +        WARN_ON_ONCE(q->elevator && !(rq->rq_flags & RQF_ELV));
> >>> +        WARN_ON_ONCE(!q->elevator && (rq->rq_flags & RQF_ELV));
> >>
> >> Hello Jens,
> >>
> >> I guess the issue could be the following code run without grabbing
> >> ->q_usage_counter from blk_mq_alloc_request() and blk_mq_alloc_request_hctx().
> >>
> >> .rq_flags       = q->elevator ? RQF_ELV : 0,
> >>
> >> then elevator is switched to real one from none, and check on q->elevator
> >> becomes not consistent.
> >
> > Indeed, that’s where I was going with this. I have a patch, testing it
> > locally but it’s getting late. Will send it out tomorrow. The nice
> > benefit is that it allows dropping the weird ref get on plug flush,
> > and batches getting the refs as well.
>
> Yi/Steffen, can you try pulling this into your test kernel:
>
> git://git.kernel.dk/linux-block for-next
>
> and see if it fixes the issue for you. Thanks!

It still can be reproduced with the latest linux-block/for-next, here is the log

fab2914e46eb (HEAD, new/for-next) Merge branch 'for-5.16/drivers' into for-next

[  965.892911] run blktests srp/001 at 2021-11-03 09:54:14
[  966.069421] alua: device handler registered
[  966.072163] emc: device handler registered
[  966.074955] rdac: device handler registered
[  966.079931] null_blk: module loaded
[  966.207798] rdma_rxe: loaded
[  966.213462] infiniband enc8000_rxe: set active
[  966.213467] infiniband enc8000_rxe: added enc8000
[  966.259104] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @
00000000340c6f55
[  966.259306] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[  966.259309] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3
[  966.259314] scsi host0: scsi_debug: version 0190 [20200710]
                 dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0
[  966.259933] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug
  0190 PQ: 0 ANSI: 7
[  966.260273] sd 0:0:0:0: Power-on or device reset occurred
[  966.260299] sd 0:0:0:0: [sda] Enabling DIF Type 3 protection
[  966.260327] sd 0:0:0:0: [sda] 65536 512-byte logical blocks: (33.6
MB/32.0 MiB)
[  966.260337] sd 0:0:0:0: [sda] Write Protect is off
[  966.260341] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[  966.260352] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[  966.260372] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  966.261748] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  966.350416] sd 0:0:0:0: [sda] Enabling DIX T10-DIF-TYPE3-CRC protection
[  966.350422] sd 0:0:0:0: [sda] DIF application tag size 6
[  966.450576] sd 0:0:0:0: [sda] Attached SCSI disk
[  966.667676] Rounding down aligned max_sectors from 4294967295 to 4294967288
[  966.703431] ib_srpt:srpt_add_one: ib_srpt device = 00000000d6a9642e
[  966.703441] ib_srpt:srpt_use_srq: ib_srpt
srpt_use_srq(enc8000_rxe): use_srq = 0; ret = 0
[  966.703443] ib_srpt:srpt_add_one: ib_srpt Target login info:
id_ext=00debdfffebeef80,ioc_guid=00debdfffebeef80,pkey=ffff,service_id=00debdfffebeef80
[  966.703499] ib_srpt:srpt_add_one: ib_srpt added enc8000_rxe.
[  967.002396] Rounding down aligned max_sectors from 255 to 248
[  967.011605] Rounding down aligned max_sectors from 255 to 248
[  967.037191] Rounding down aligned max_sectors from 4294967295 to 4294967288
[  967.130091] ib_srp:srp_add_one: ib_srp: srp_add_one:
18446744073709551615 / 4096 = 4503599627370495 <> 512
[  967.130097] ib_srp:srp_add_one: ib_srp: enc8000_rxe: mr_page_shift
= 12, device->max_mr_size = 0xffffffffffffffff,
device->max_fast_reg_page_list_len = 512, max_pages_per_mr = 512,
mr_max_size = 0x200000
[  967.148347] ib_srp:srp_parse_in: ib_srp: 10.16.69.39 -> 10.16.69.39:0
[  967.148352] ib_srp:srp_parse_in: ib_srp: 10.16.69.39:5555 -> 10.16.69.39:5555
[  967.148355] ib_srp:add_target_store: ib_srp: max_sectors = 1024;
max_pages_per_mr = 512; mr_page_size = 4096; max_sectors_per_mr =
4096; mr_per_cmd = 2
[  967.148358] ib_srp:srp_max_it_iu_len: ib_srp: max_iu_len = 8260
[  967.148754] ib_srpt Received SRP_LOGIN_REQ with i_port_id
fe80:0000:0000:0000:00de:bdff:febe:ef80, t_port_id
00de:bdff:febe:ef80:00de:bdff:febe:ef80 and it_iu_len 8260 on port 1
(guid=fe80:0000:0000:0000:00de:bdff:febe:ef80); pkey 0xffff
[  967.148856] ib_srpt:srpt_cm_req_recv: ib_srpt imm_data_offset = 68
[  967.151639] ib_srpt:srpt_create_ch_ib: ib_srpt srpt_create_ch_ib:
max_cqe= 8191 max_sge= 32 sq_size = 4096 ch= 00000000d562fdc1
[  967.151654] ib_srpt:srpt_cm_req_recv: ib_srpt registering src addr
10.16.69.39 or i_port_id 0xfe8000000000000000debdfffebeef80
[  967.151674] ib_srpt:srpt_cm_req_recv: ib_srpt Establish connection
sess=0000000047d911b7 name=10.16.69.39 ch=00000000d562fdc1
[  967.151699] ib_srp:srp_max_it_iu_len: ib_srp: max_iu_len = 8260
[  967.151702] scsi host1: ib_srp: using immediate data
[  967.152088] ib_srpt:srpt_zerolength_write: ib_srpt 10.16.69.39-18:
queued zerolength write
[  967.152101] ib_srpt:srpt_zerolength_write_done: ib_srpt
10.16.69.39-18 wc->status 0
[  967.152444] ib_srpt Received SRP_LOGIN_REQ with i_port_id
fe80:0000:0000:0000:00de:bdff:febe:ef80, t_port_id
00de:bdff:febe:ef80:00de:bdff:febe:ef80 and it_iu_len 8260 on port 1
(guid=fe80:0000:0000:0000:00de:bdff:febe:ef80); pkey 0xffff
[  967.152538] ib_srpt:srpt_cm_req_recv: ib_srpt imm_data_offset = 68
[  967.154559] ib_srpt:srpt_create_ch_ib: ib_srpt srpt_create_ch_ib:
max_cqe= 8191 max_sge= 32 sq_size = 4096 ch= 000000001d71a872
[  967.154572] ib_srpt:srpt_cm_req_recv: ib_srpt registering src addr
10.16.69.39 or i_port_id 0xfe8000000000000000debdfffebeef80
[  967.154586] ib_srpt:srpt_cm_req_recv: ib_srpt Establish connection
sess=00000000af249bba name=10.16.69.39 ch=000000001d71a872
[  967.154607] ib_srp:srp_max_it_iu_len: ib_srp: max_iu_len = 8260
[  967.154609] scsi host1: ib_srp: using immediate data
[  967.155020] ib_srpt:srpt_zerolength_write: ib_srpt 10.16.69.39-20:
queued zerolength write
[  967.155031] ib_srpt:srpt_zerolength_write_done: ib_srpt
10.16.69.39-20 wc->status 0
[  967.155036] scsi host1: SRP.T10:00DEBDFFFEBEEF80
[  967.155533] scsi 1:0:0:0: Direct-Access     LIO-ORG  IBLOCK
  4.0  PQ: 0 ANSI: 6
[  967.155909] scsi 1:0:0:0: alua: supports implicit and explicit TPGS
[  967.155914] scsi 1:0:0:0: alua: device
naa.60014056e756c6c62300000000000000 port group 0 rel port 1
[  967.156070] sd 1:0:0:0: Warning! Received an indication that the
LUN assignments on this target have changed. The Linux SCSI layer does
not automatical
[  967.156091] sd 1:0:0:0: Attached scsi generic sg1 type 0
[  967.170537] sd 1:0:0:0: alua: transition timeout set to 60 seconds
[  967.170543] sd 1:0:0:0: alua: port group 00 state A non-preferred
supports TOlUSNA
[  967.170806] sd 1:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6
MB/32.0 MiB)
[  967.170855] sd 1:0:0:0: [sdb] Write Protect is off
[  967.170858] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 08
[  967.170907] sd 1:0:0:0: [sdb] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[  967.170918] srpt/10.16.69.39: Unsupported SCSI Opcode 0xa3, sending
CHECK_CONDITION.
[  967.170956] sd 1:0:0:0: [sdb] Optimal transfer size 126976 bytes
[  967.172013] scsi 1:0:0:2: Direct-Access     LIO-ORG  IBLOCK
  4.0  PQ: 0 ANSI: 6
[  967.172138] scsi 1:0:0:2: alua: supports implicit and explicit TPGS
[  967.172142] scsi 1:0:0:2: alua: device
naa.60014057363736964626700000000000 port group 0 rel port 1
[  967.172205] sd 1:0:0:2: Attached scsi generic sg2 type 0
[  967.172404] sd 1:0:0:2: [sdc] 65536 512-byte logical blocks: (33.6
MB/32.0 MiB)
[  967.172425] scsi 1:0:0:1: Direct-Access     LIO-ORG  IBLOCK
  4.0  PQ: 0 ANSI: 6
[  967.172434] sd 1:0:0:2: [sdc] Write Protect is off
[  967.172437] sd 1:0:0:2: [sdc] Mode Sense: 43 00 10 08
[  967.172488] sd 1:0:0:2: [sdc] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[  967.172499] srpt/10.16.69.39: Unsupported SCSI Opcode 0xa3, sending
CHECK_CONDITION.
[  967.172538] sd 1:0:0:2: [sdc] Optimal transfer size 524288 bytes
[  967.172542] scsi 1:0:0:1: alua: supports implicit and explicit TPGS
[  967.172546] scsi 1:0:0:1: alua: device
naa.60014056e756c6c62310000000000000 port group 0 rel port 1
[  967.172624] sd 1:0:0:1: Attached scsi generic sg3 type 0
[  967.172648] ib_srp:srp_add_target: ib_srp: host1: SCSI scan
succeeded - detected 3 LUNs
[  967.172650] scsi host1: ib_srp: new target: id_ext 00debdfffebeef80
ioc_guid 00debdfffebeef80 sgid fe80:0000:0000:0000:00de:bdff:febe:ef80
dest 10.16.69.39
[  967.173447] sd 1:0:0:1: Warning! Received an indication that the
LUN assignments on this target have changed. The Linux SCSI layer does
not automatical
[  967.175069] ib_srp:srp_parse_in: ib_srp: 10.16.69.39 -> 10.16.69.39:0
[  967.175073] ib_srp:srp_parse_in: ib_srp: 10.16.69.39:5555 -> 10.16.69.39:5555
[  967.175080] ib_srp:srp_parse_in: ib_srp:
[2620:52:0:1040:de:bdff:febe:ef80] ->
[2620:52:0:1040:de:bdff:febe:ef80]:0/168838439%0
[  967.175085] ib_srp:srp_parse_in: ib_srp:
[2620:52:0:1040:de:bdff:febe:ef80]:5555 ->
[2620:52:0:1040:de:bdff:febe:ef80]:5555/168838439%0
[  967.175087] scsi host2: ib_srp: Already connected to target port
with id_ext=00debdfffebeef80;ioc_guid=00debdfffebeef80;dest=2620:0052:0000:1040:00de:bdff:febe:ef80
[  967.190459] sd 1:0:0:1: alua: transition timeout set to 60 seconds
[  967.190464] sd 1:0:0:1: alua: port group 00 state A non-preferred
supports TOlUSNA
[  967.190612] sd 1:0:0:1: [sdd] 65536 512-byte logical blocks: (33.6
MB/32.0 MiB)
[  967.190639] sd 1:0:0:1: [sdd] Write Protect is off
[  967.190642] sd 1:0:0:1: [sdd] Mode Sense: 43 00 00 08
[  967.190688] sd 1:0:0:1: [sdd] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[  967.190698] srpt/10.16.69.39: Unsupported SCSI Opcode 0xa3, sending
CHECK_CONDITION.
[  967.190735] sd 1:0:0:1: [sdd] Optimal transfer size 126976 bytes
[  967.230346] sd 1:0:0:2: alua: transition timeout set to 60 seconds
[  967.230351] sd 1:0:0:2: alua: port group 00 state A non-preferred
supports TOlUSNA
[  967.232123] ib_srp:srp_parse_in: ib_srp: 10.16.69.39 -> 10.16.69.39:0
[  967.232127] ib_srp:srp_parse_in: ib_srp: 10.16.69.39:5555 -> 10.16.69.39:5555
[  967.232133] ib_srp:srp_parse_in: ib_srp:
[2620:52:0:1040:de:bdff:febe:ef80] ->
[2620:52:0:1040:de:bdff:febe:ef80]:0/168838439%0
[  967.232137] ib_srp:srp_parse_in: ib_srp:
[2620:52:0:1040:de:bdff:febe:ef80]:5555 ->
[2620:52:0:1040:de:bdff:febe:ef80]:5555/168838439%0
[  967.232143] ib_srp:srp_parse_in: ib_srp:
[fe80::de:bdff:febe:ef80%2] -> [fe80::de:bdff:febe:ef80]:0/168838439%2
[  967.232147] ib_srp:srp_parse_in: ib_srp:
[fe80::de:bdff:febe:ef80%2]:5555 ->
[fe80::de:bdff:febe:ef80]:5555/168838439%2
[  967.232150] scsi host2: ib_srp: Already connected to target port
with id_ext=00debdfffebeef80;ioc_guid=00debdfffebeef80;dest=fe80:0000:0000:0000:00de:bdff:febe:ef80
[  967.295512] ------------[ cut here ]------------
[  967.295517] WARNING: CPU: 1 PID: 8 at block/blk-mq-sched.c:432
blk_mq_sched_insert_request+0x54/0x178
[  967.295529] Modules linked in: ib_srp scsi_transport_srp
target_core_pscsi target_core_file ib_srpt target_core_iblock
target_core_mod rdma_cm iw_cm ib_cm ib_umad scsi_debug rdma_rxe
ib_uverbs ip6_udp_tunnel udp_tunnel null_blk scsi_dh_rdac scsi_dh_emc
scsi_dh_alua dm_multipath ib_core sunrpc qeth_l2 bridge stp llc qeth
zcrypt_cex4 qdio ccwgroup vfio_ccw mdev vfio_iommu_type1 vfio drm fb
font drm_panel_orientation_quirks i2c_core fuse backlight zram
ip_tables xfs crc32_vx_s390 ghash_s390 prng aes_s390 des_s390 libdes
sha512_s390 sha256_s390 sha1_s390 sha_common dasd_eckd_mod dasd_mod
pkey zcrypt
[  967.295579] CPU: 1 PID: 8 Comm: kworker/u128:0 Not tainted 5.15.0.v3+ #6
[  967.295582] Hardware name: IBM 2964 N96 400 (z/VM 6.4.0)
[  967.295584] Workqueue: events_unbound async_run_entry_fn
[  967.295591] Krnl PSW : 0704e00180000000 000000004feaa208
(blk_mq_sched_insert_request+0x58/0x178)
[  967.295596]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3
CC:2 PM:0 RI:0 EA:3
[  967.295600] Krnl GPRS: 0000000000000040 000000000000001d
000000001eb37400 0000000000000001
[  967.295603]            0000000000000001 0000000000000000
000000001dbea800 000000001c739800
[  967.295605]            0000000000000000 0000000000000001
0000000000000001 000000001eb37400
[  967.295607]            00000000006ba100 000003ff7e82da00
0000038000047818 00000380000477a8
[  967.295615] Krnl Code: 000000004feaa1fc: a71effff chi %r1,-1
                          000000004feaa200: a7840004 brc 8,000000004feaa208
                         #000000004feaa204: af000000 mc 0,0
                         >000000004feaa208: 5810b01c l %r1,28(%r11)
                          000000004feaa20c: ec213bbb0055 risbg %r2,%r1,59,187,0
                          000000004feaa212: a7740057 brc 7,000000004feaa2c0
                          000000004feaa216: 5810b018 l %r1,24(%r11)
                          000000004feaa21a: c01b000000ff nilf %r1,255
[  967.295635] Call Trace:
[  967.295637]  [<000000004feaa208>] blk_mq_sched_insert_request+0x58/0x178
[  967.295643]  [<000000004fe9aa2e>] blk_execute_rq+0x56/0xd8
[  967.295649]  [<000000005005cea0>] __scsi_execute+0x110/0x230
[  967.295654]  [<00000000500534bc>] scsi_vpd_inquiry+0x7c/0xc0
[  967.295660]  [<000000005005354a>] scsi_get_vpd_page+0x4a/0xf8
[  967.295663]  [<000000005006ebdc>] sd_revalidate_disk.isra.0+0xf14/0x2240
[  967.295667]  [<000000005007043a>] sd_probe+0x312/0x4b0
[  967.295670]  [<0000000050023830>] really_probe+0xd0/0x4b0
[  967.295675]  [<0000000050023dc0>] driver_probe_device+0x40/0xf0
[  967.295679]  [<00000000500244cc>] __device_attach_driver+0xa4/0x128
[  967.295682]  [<0000000050020bd0>] bus_for_each_drv+0x88/0xc0
[  967.295685]  [<0000000050022d30>] __device_attach_async_helper+0x90/0xf0
[  967.295688]  [<000000004f8fcd1e>] async_run_entry_fn+0x4e/0x1b0
[  967.295691]  [<000000004f8ef62a>] process_one_work+0x21a/0x498
[  967.295695]  [<000000004f8efdd4>] worker_thread+0x64/0x498
[  967.295697]  [<000000004f8f871c>] kthread+0x184/0x190
[  967.295702]  [<000000004f883468>] __ret_from_fork+0x40/0x58
[  967.295706]  [<00000000503d144a>] ret_from_fork+0xa/0x30
[  967.295712] Last Breaking-Event-Address:
[  967.295713]  [<0000000000000003>] 0x3
[  967.295716] ---[ end trace faff7345b32090bf ]---


>
> --
> Jens Axboe
>


-- 
Best Regards,
  Yi Zhang





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux