[PATCH v4 03/13] qla2xxx: turn off target reset during issue_lip

[Nilesh Javali <njavali@xxxxxxxxxxx>]

From: Quinn Tran <qutran@xxxxxxxxxxx>

When user use issue_lip to do link bounce, driver sends
additional target reset to remote device before resetting
the link. The target reset would affect other paths with
active IOs. This patch will remove the unnecessary
target reset.

Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_gbl.h |  2 --
 drivers/scsi/qla2xxx/qla_mr.c  | 23 -----------------------
 drivers/scsi/qla2xxx/qla_os.c  | 27 ++-------------------------
 3 files changed, 2 insertions(+), 50 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 8aadcdeca6cb..8faaa0ec595d 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -171,7 +171,6 @@ extern int ql2xasynctmfenable;
 extern int ql2xgffidenable;
 extern int ql2xenabledif;
 extern int ql2xenablehba_err_chk;
-extern int ql2xtargetreset;
 extern int ql2xdontresethba;
 extern uint64_t ql2xmaxlun;
 extern int ql2xmdcapmask;
@@ -820,7 +819,6 @@ extern void qlafx00_abort_iocb(srb_t *, struct abort_iocb_entry_fx00 *);
 extern void qlafx00_fxdisc_iocb(srb_t *, struct fxdisc_entry_fx00 *);
 extern void qlafx00_timer_routine(scsi_qla_host_t *);
 extern int qlafx00_rescan_isp(scsi_qla_host_t *);
-extern int qlafx00_loop_reset(scsi_qla_host_t *vha);
 
 /* qla82xx related functions */
 
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 6e920da64863..350b0c4346fb 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -738,29 +738,6 @@ qlafx00_lun_reset(fc_port_t *fcport, uint64_t l, int tag)
 	return qla2x00_async_tm_cmd(fcport, TCF_LUN_RESET, l, tag);
 }
 
-int
-qlafx00_loop_reset(scsi_qla_host_t *vha)
-{
-	int ret;
-	struct fc_port *fcport;
-	struct qla_hw_data *ha = vha->hw;
-
-	if (ql2xtargetreset) {
-		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			if (fcport->port_type != FCT_TARGET)
-				continue;
-
-			ret = ha->isp_ops->target_reset(fcport, 0, 0);
-			if (ret != QLA_SUCCESS) {
-				ql_dbg(ql_dbg_taskm, vha, 0x803d,
-				    "Bus Reset failed: Reset=%d "
-				    "d_id=%x.\n", ret, fcport->d_id.b24);
-			}
-		}
-	}
-	return QLA_SUCCESS;
-}
-
 int
 qlafx00_iospace_config(struct qla_hw_data *ha)
 {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 03ff2596715b..3fca6b8bb23f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -202,12 +202,6 @@ MODULE_PARM_DESC(ql2xdbwr,
 		" 0 -- Regular doorbell.\n"
 		" 1 -- CAMRAM doorbell (faster).\n");
 
-int ql2xtargetreset = 1;
-module_param(ql2xtargetreset, int, S_IRUGO);
-MODULE_PARM_DESC(ql2xtargetreset,
-		 "Enable target reset."
-		 "Default is 1 - use hw defaults.");
-
 int ql2xgffidenable;
 module_param(ql2xgffidenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xgffidenable,
@@ -1695,27 +1689,10 @@ int
 qla2x00_loop_reset(scsi_qla_host_t *vha)
 {
 	int ret;
-	struct fc_port *fcport;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (IS_QLAFX00(ha)) {
-		return qlafx00_loop_reset(vha);
-	}
-
-	if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
-		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			if (fcport->port_type != FCT_TARGET)
-				continue;
-
-			ret = ha->isp_ops->target_reset(fcport, 0, 0);
-			if (ret != QLA_SUCCESS) {
-				ql_dbg(ql_dbg_taskm, vha, 0x802c,
-				    "Bus Reset failed: Reset=%d "
-				    "d_id=%x.\n", ret, fcport->d_id.b24);
-			}
-		}
-	}
-
+	if (IS_QLAFX00(ha))
+		return QLA_SUCCESS;
 
 	if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
 		atomic_set(&vha->loop_state, LOOP_DOWN);
-- 
2.19.0.rc0