There is a code path in the SCSI async abort handling that can cause error
handling of subsequent scsi_cmnds to proceed immediately to host reset with no
other attempt at recovery.
This can be seen by the following:
modprobe scsi_debug every_nth=10 opts=4
echo 7 > /sys/module/scsi_mod/parameters/scsi_logging_level
echo 10 > /sys/devices/pseudo_0/adapter0/host8/scsi_host/host<N>/eh_deadline
and performing I/O to the scsi_debug device, the host will get reset immediately
when prior aborts succeeded, because ->last_reset does not get invalidated.
The patch series contains a fix, followed by a simplification
of the control flow to remove duplicate code. Only the first patch
is Cc: stable as the second part doesn't qualify. Yes, I know the
first patch is >100 lines, I couldn't make it smaller unfortunately.
Signed-off-by: Ewan D. Milne <emilne@xxxxxxxxxx>
Ewan D. Milne (2):
scsi: core: avoid leaving shost->last_reset with stale value if EH
does not run
scsi: core: simplify control flow in scmd_eh_abort_handler
drivers/scsi/hosts.c | 1 +
drivers/scsi/scsi_error.c | 92 ++++++++++++++++++++++++++++++-----------------
drivers/scsi/scsi_lib.c | 1 +
include/scsi/scsi_cmnd.h | 2 +-
include/scsi/scsi_host.h | 1 +
5 files changed, 63 insertions(+), 34 deletions(-)
--
2.1.0
