[PATCH v4 07/16] scsi: ufs: ufs-exynos: correct timeout value setting registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PA_PWRMODEUSERDATA0 -> DL_FC0PROTTIMEOUTVAL
PA_PWRMODEUSERDATA1 -> DL_TC0REPLAYTIMEOUTVAL
PA_PWRMODEUSERDATA2 -> DL_AFC0REQTIMEOUTVAL

Cc: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
Cc: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
Fixes: a967ddb22d94 ("scsi: ufs: ufs-exynos: Apply vendor-specific values for three timeouts")
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
Signed-off-by: Chanho Park <chanho61.park@xxxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-exynos.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
index e800fb9e1ce4..41797f499544 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/scsi/ufs/ufs-exynos.c
@@ -643,9 +643,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
 	}
 
 	/* setting for three timeout values for traffic class #0 */
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), 8064);
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), 28224);
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), 20160);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(DL_FC0PROTTIMEOUTVAL), 8064);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(DL_TC0REPLAYTIMEOUTVAL), 28224);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(DL_AFC0REQTIMEOUTVAL), 20160);
 
 	return 0;
 out:
-- 
2.33.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux