This series integrate new firmware version 8.59.1.0, along with updated
HSI (hardware software interface) to use the FW, into the family of
qed drivers (fastlinq devices). This FW does not reside in the NVRAM.
It needs to be programmed to device during driver load as the part of
initialization sequence.
Similar to previous FW support series, this FW is tightly linked to
software and pf function driver. This means FW release is not backward
compatible, and driver should always run with the FW it was designed
against.
FW binary blob is already submitted & accepted in linux-firmware repo.
Patches in the series include:
patch 1 - qed: Fix kernel-doc warnings
patch 2 - qed: Remove e4_ and _e4 from FW HSI
patch 3 - qed: split huge qed_hsi.h header file
patch 4-8 - HSI (hardware software interface) changes
patch 9 - qed: Add '_GTT' suffix to the IRO RAM macros
patch 10 - qed: Update debug related changes
patch 11 - qed: rdma: Update TCP silly-window-syndrome timeout
patch 12 - qed: Update the TCP active termination 2 MSL timer
patch 13 - qed: fix ll2 establishment during load of RDMA driver
In addition, this patch series also fixes existing checkpatch warnings
and checks which are missing.
Changes for v2:
- Incorporated Jakub's comments.
- New patch introduced to fix all kernel-doc issue in qed driver.
- Fixed warning: ‘qed_mfw_ext_20g’ defined but not used.
- Fixed warning related to kernel-doc wrt to this series.
- Removed inline function declaration.
Manish Chopra (1):
qed: fix ll2 establishment during load of RDMA driver
Nikolay Assa (1):
qed: Update TCP silly-window-syndrome timeout for iwarp, scsi
Omkar Kulkarni (2):
qed: Split huge qed_hsi.h header file
qed: Update FW init functions to support FW 8.59.1.0
Prabhakar Kushwaha (8):
qed: Fix kernel-doc warnings
qed: Update common_hsi for FW ver 8.59.1.0
qed: Update qed_mfw_hsi.h for FW ver 8.59.1.0
qed: Update qed_hsi.h for fw 8.59.1.0
qed: Use enum as per FW 8.59.1.0 in qed_iro_hsi.h
qed: Add '_GTT' suffix to the IRO RAM macros
qed: Update debug related changes
qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT")
Shai Malin (1):
qed: Remove e4_ and _e4 from FW HSI
drivers/infiniband/hw/qedr/main.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed.h | 44 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 16 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.h | 143 +-
drivers/net/ethernet/qlogic/qed/qed_dbg_hsi.h | 1491 ++
drivers/net/ethernet/qlogic/qed/qed_dcbx.h | 11 +-
drivers/net/ethernet/qlogic/qed/qed_debug.c | 1394 +-
drivers/net/ethernet/qlogic/qed/qed_debug.h | 7 +-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 122 +-
drivers/net/ethernet/qlogic/qed/qed_dev_api.h | 345 +-
drivers/net/ethernet/qlogic/qed/qed_fcoe.c | 25 +-
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 12643 +++++++---------
drivers/net/ethernet/qlogic/qed/qed_hw.h | 222 +-
.../ethernet/qlogic/qed/qed_init_fw_funcs.c | 405 +-
.../net/ethernet/qlogic/qed/qed_init_ops.c | 98 +-
.../net/ethernet/qlogic/qed/qed_init_ops.h | 60 +-
drivers/net/ethernet/qlogic/qed/qed_int.c | 4 +-
drivers/net/ethernet/qlogic/qed/qed_int.h | 286 +-
drivers/net/ethernet/qlogic/qed/qed_iro_hsi.h | 500 +
drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 15 +-
drivers/net/ethernet/qlogic/qed/qed_iscsi.h | 9 +-
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 +
drivers/net/ethernet/qlogic/qed/qed_l2.c | 18 +-
drivers/net/ethernet/qlogic/qed/qed_l2.h | 135 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 64 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 131 +-
drivers/net/ethernet/qlogic/qed/qed_main.c | 21 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 64 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.h | 763 +-
drivers/net/ethernet/qlogic/qed/qed_mfw_hsi.h | 2474 +++
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 7 +-
drivers/net/ethernet/qlogic/qed/qed_rdma.h | 7 +-
.../net/ethernet/qlogic/qed/qed_reg_addr.h | 95 +-
drivers/net/ethernet/qlogic/qed/qed_roce.c | 1 -
.../net/ethernet/qlogic/qed/qed_selftest.h | 30 +-
drivers/net/ethernet/qlogic/qed/qed_sp.h | 223 +-
.../net/ethernet/qlogic/qed/qed_sp_commands.c | 10 +-
drivers/net/ethernet/qlogic/qed/qed_spq.c | 63 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 200 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 126 +-
drivers/net/ethernet/qlogic/qed/qed_vf.c | 11 +-
drivers/net/ethernet/qlogic/qed/qed_vf.h | 307 +-
drivers/net/ethernet/qlogic/qede/qede_main.c | 7 +-
drivers/scsi/qedf/drv_fcoe_fw_funcs.c | 8 +-
drivers/scsi/qedf/drv_fcoe_fw_funcs.h | 2 +-
drivers/scsi/qedf/qedf.h | 4 +-
drivers/scsi/qedf/qedf_els.c | 2 +-
drivers/scsi/qedf/qedf_io.c | 12 +-
drivers/scsi/qedf/qedf_main.c | 8 +-
drivers/scsi/qedi/qedi_debugfs.c | 4 +-
drivers/scsi/qedi/qedi_fw.c | 40 +-
drivers/scsi/qedi/qedi_fw_api.c | 22 +-
drivers/scsi/qedi/qedi_fw_iscsi.h | 2 +-
drivers/scsi/qedi/qedi_iscsi.h | 2 +-
drivers/scsi/qedi/qedi_main.c | 11 +-
include/linux/qed/common_hsi.h | 141 +-
include/linux/qed/eth_common.h | 1 +
include/linux/qed/fcoe_common.h | 362 +-
include/linux/qed/iscsi_common.h | 360 +-
include/linux/qed/nvmetcp_common.h | 18 +-
include/linux/qed/qed_chain.h | 97 +-
include/linux/qed/qed_if.h | 263 +-
include/linux/qed/qed_iscsi_if.h | 2 +-
include/linux/qed/qed_ll2_if.h | 42 +-
include/linux/qed/qed_nvmetcp_if.h | 17 +
include/linux/qed/rdma_common.h | 1 +
66 files changed, 13577 insertions(+), 10445 deletions(-)
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_dbg_hsi.h
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_iro_hsi.h
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_mfw_hsi.h
--
2.24.1
