Re: [PATCH 2/2] scsi: ufs: Stop clearing unit attentions

[Douglas Gilbert <dgilbert@xxxxxxxxxxxx>]

On 2021-10-01 12:59 p.m., Bart Van Assche wrote:
> On 9/30/21 11:52 PM, Adrian Hunter wrote:
> > Finally, there is another thing to change.  The reason
> > ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the
> > UAC clear would wait for an async runtime resume, which will never happen
> > during system suspend because the PM workqueue gets frozen.  So with the
> > removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete()
> > should be updated also, to leave rpmb alone.

Somewhat related ...

Since there was some confusion among the members of T10 of what precisely
the RPM bit meant, in SPC-6 revision (draft), a new "HOT PLUGGABLE" two
bit field was introduced into the standard INQUIRY response:

                Table 151 — HOT PLUGGABLE field

Code   Description
00b    No information is provided regarding whether SCSI target device is hot
       pluggable.
01b    The SCSI target device is designed to be removed from a SCSI domain as
       a single object (i.e., concurrent removal of the SCSI target ports,
       logical units, and all other objects contained in that SCSI target
       device (see SAM-6)) while that SCSI domain continues to operate for
       all other SCSI target devices, if any, in that SCSI domain.
10b    The SCSI target device is not designed to be removed from a SCSI
       domain while that SCSI domain continues to operate.
11b    Reserved

That field is bits 5 and 4 of byte 1 of the response.

Perhaps we should be adding provision for this new field.

Doug Gilbert

> Is the following change what you have in mind?
>
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 0a28cc4c09d8..0743f54e55f9 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -9648,10 +9648,6 @@ void ufshcd_resume_complete(struct device *dev)
>           ufshcd_rpm_put(hba);
>           hba->complete_put = false;
>       }
> -    if (hba->rpmb_complete_put) {
> -        ufshcd_rpmb_rpm_put(hba);
> -        hba->rpmb_complete_put = false;
> -    }
>   }
>   EXPORT_SYMBOL_GPL(ufshcd_resume_complete);
>
> @@ -9674,10 +9670,6 @@ int ufshcd_suspend_prepare(struct device *dev)
>           }
>           hba->complete_put = true;
>       }
> -    if (hba->sdev_rpmb) {
> -        ufshcd_rpmb_rpm_get_sync(hba);
> -        hba->rpmb_complete_put = true;
> -    }
>       return 0;
>   }
>   EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 86b615023ecb..5ecfcd8cae0a 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -921,7 +921,6 @@ struct ufs_hba {
>   #endif
>       u32 luns_avail;
>       bool complete_put;
> -    bool rpmb_complete_put;
>   };
>
>   /* Returns true if clocks can be gated. Otherwise false */
>
>
>
> Thanks,
>
> Bart.