The newly added congestion mgmt framework is seeing unexpected
congestion FPINs and signals. In analysis, time values given to
the adapter are not at hard time intervals. Thus the drift vs the
transfer count seen is affecting how the framework manages things.
Adjust counters to cover the drift.
Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_init.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ea57151221cd..4637531f3b02 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5876,7 +5876,7 @@ lpfc_cmf_timer(struct hrtimer *timer)
uint32_t io_cnt;
uint32_t head, tail;
uint32_t busy, max_read;
- uint64_t total, rcv, lat, mbpi;
+ uint64_t total, rcv, lat, mbpi, extra;
int timer_interval = LPFC_CMF_INTERVAL;
uint32_t ms;
struct lpfc_cgn_stat *cgs;
@@ -5943,7 +5943,19 @@ lpfc_cmf_timer(struct hrtimer *timer)
phba->hba_flag & HBA_SETUP) {
mbpi = phba->cmf_last_sync_bw;
phba->cmf_last_sync_bw = 0;
- lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total);
+ extra = 0;
+
+ /* Calculate any extra bytes needed to account for the
+ * timer accuracy. If we are less than LPFC_CMF_INTERVAL
+ * add an extra 3% slop factor, equal to LPFC_CMF_INTERVAL
+ * add an extra 2%. The goal is to equalize total with a
+ * time > LPFC_CMF_INTERVAL or <= LPFC_CMF_INTERVAL + 1
+ */
+ if (ms == LPFC_CMF_INTERVAL)
+ extra = div_u64(total, 50);
+ else if (ms < LPFC_CMF_INTERVAL)
+ extra = div_u64(total, 33);
+ lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total + extra);
} else {
/* For Monitor mode or link down we want mbpi
* to be the full link speed
--
2.26.2
