[PATCH 09/10] qla2xxx: Fix use after free in eh_abort path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

In eh_abort path, driver prematurely exit the call to upper layer.
This patch would check for command is aborted / completed by FW
before exiting the call.

9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778
  [exception RIP: qla2x00_status_entry+0x48d]
  RIP: ffffffffc04fa62d  RSP: ffff8b1ebf803cb0  RFLAGS: 00010082
  RAX: 00000000ffffffff  RBX: 00000000000e0000  RCX: 0000000000000000
  RDX: 0000000000000000  RSI: 00000000000013d8  RDI: fffff3253db78440
  RBP: ffff8b1ebf803dd0   R8: ffff8b1ebcd9b0c0   R9: 0000000000000000
  R10: ffff8b1e38a30808  R11: 0000000000001000  R12: 00000000000003e9
  R13: 0000000000000000  R14: ffff8b1ebcd9d740  R15: 0000000000000028
  ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f
11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88
12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6
[qla2xxx]
13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx]
14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714

Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Signed-off-by: David Jeffery <djeffery@xxxxxxxxxx>
Signed-off-by: Laurence Oberman <loberman@xxxxxxxxxx>
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_os.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 0454f79a8047..0f3048723965 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1258,6 +1258,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	uint32_t ratov_j;
 	struct qla_qpair *qpair;
 	unsigned long flags;
+	int fast_fail_status = SUCCESS;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x8042,
@@ -1266,9 +1267,10 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
+	/* Save any FAST_IO_FAIL value to return later if abort succeeds */
 	ret = fc_block_scsi_eh(cmd);
 	if (ret != 0)
-		return ret;
+		fast_fail_status = ret;
 
 	sp = scsi_cmd_priv(cmd);
 	qpair = sp->qpair;
@@ -1276,7 +1278,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	vha->cmd_timeout_cnt++;
 
 	if ((sp->fcport && sp->fcport->deleted) || !qpair)
-		return SUCCESS;
+		return fast_fail_status != SUCCESS ? fast_fail_status : FAILED;
 
 	spin_lock_irqsave(qpair->qp_lock_ptr, flags);
 	sp->comp = &comp;
@@ -1311,7 +1313,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    __func__, ha->r_a_tov/10);
 			ret = FAILED;
 		} else {
-			ret = SUCCESS;
+			ret = fast_fail_status;
 		}
 		break;
 	default:
-- 
2.19.0.rc0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux