UFS SCSI devices make use of device links to establish PM dependencies.
However, SCSI PM will force devices' runtime PM state to be active during
system resume. That can break runtime PM dependencies for UFS devices.
Fix by adding a flag 'preserve_rpm' to let UFS SCSI devices opt-out of
the unwanted behaviour.
Fixes: b294ff3e34490f ("scsi: ufs: core: Enable power management for wlun")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/scsi/scsi_pm.c | 16 +++++++++++-----
drivers/scsi/ufs/ufshcd.c | 1 +
include/scsi/scsi_device.h | 1 +
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 3717eea37ecb..0557c1ad304d 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -73,13 +73,22 @@ static int scsi_dev_type_resume(struct device *dev,
int (*cb)(struct device *, const struct dev_pm_ops *))
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ struct scsi_device *sdev = NULL;
+ bool preserve_rpm = false;
int err = 0;
+ if (scsi_is_sdev_device(dev)) {
+ sdev = to_scsi_device(dev);
+ preserve_rpm = sdev->preserve_rpm;
+ if (preserve_rpm && pm_runtime_suspended(dev))
+ return 0;
+ }
+
err = cb(dev, pm);
scsi_device_resume(to_scsi_device(dev));
dev_dbg(dev, "scsi resume: %d\n", err);
- if (err == 0) {
+ if (err == 0 && !preserve_rpm) {
pm_runtime_disable(dev);
err = pm_runtime_set_active(dev);
pm_runtime_enable(dev);
@@ -91,11 +100,8 @@ static int scsi_dev_type_resume(struct device *dev,
*
* The resume hook will correct runtime PM status of the disk.
*/
- if (!err && scsi_is_sdev_device(dev)) {
- struct scsi_device *sdev = to_scsi_device(dev);
-
+ if (!err && sdev)
blk_set_runtime_active(sdev->request_queue);
- }
}
return err;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 52fb059efa77..57ed4b93b949 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5016,6 +5016,7 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
pm_runtime_get_noresume(&sdev->sdev_gendev);
else if (ufshcd_is_rpm_autosuspend_allowed(hba))
sdev->rpm_autosuspend = 1;
+ sdev->preserve_rpm = 1;
ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 09a17f6e93a7..47eb30a6b7b2 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -197,6 +197,7 @@ struct scsi_device {
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
+ unsigned preserve_rpm:1; /* Preserve runtime PM */
unsigned security_supported:1; /* Supports Security Protocols */
unsigned is_visible:1; /* is the device visible in sysfs */
unsigned wce_default_on:1; /* Cache is ON by default */
--
2.17.1
