Re: rq pointer in tags->rqs[] is not cleared in time and make SCSI error handle can not be triggered

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Ming


Sorry to reply so late, This issue occur in low probability,

so it take some time to confirm.


On 2021/8/26 15:29, Ming Lei wrote:
On Thu, Aug 26, 2021 at 11:00:34AM +0800, luojiaxing wrote:
Dear all:


I meet some problem when test hisi_sas driver(under SCSI) based on 5.14-rc4
kernel, it's found that error handle can not be triggered after

abnormal IO occur in some test with a low probability. For example,
circularly run disk hardreset or disable all local phy of expander when
running fio.


We add some tracepoint and print to see what happen, and we got the
following information:

(1).print rq and rq_state at bt_tags_iter() to confirm how many IOs is
running now.

<4>[  897.431182] bt_tags_iter: rqs[2808]: 0xffff202007bd3000; rq_state: 1
<4>[  897.437514] bt_tags_iter: rqs[3185]: 0xffff0020c5261e00; rq_state: 1
<4>[  897.443841] bt_tags_iter: rqs[3612]: 0xffff00212f242a00; rq_state: 1
<4>[  897.450167] bt_tags_iter: rqs[2808]: 0xffff00211d208100; rq_state: 1
<4>[  897.456492] bt_tags_iter: rqs[2921]: 0xffff00211d208100; rq_state: 1
<4>[  897.462818] bt_tags_iter: rqs[1214]: 0xffff002151d21b00; rq_state: 1
<4>[  897.469143] bt_tags_iter: rqs[2648]: 0xffff0020c4bfa200; rq_state: 1

The preceding information show that rq with tag[2808] is found in different
hctx by bt_tags_iter() and with different pointer saved in tags->rqs[].

And tag[2808] own the same pointer value saved in rqs[] with tag[2921]. It's
wrong because our driver share tag between all hctx, so it's not possible
What is your io scheduler? I guess it is deadline,


yes


  and can you observe
such issue by switching to none?


Yes, it happen when switched to none



The tricky thing is that one request dumped may be re-allocated to other tag
after returning from bt_tags_iter().

to allocate one tag to different rq.


(2).check tracepoints(temporarily add) in blk_mq_get_driver_tag() and
blk_mq_put_tag() to see where this tag is come from.

     Line 1322969:            <...>-20189   [013] .... 893.427707:
blk_mq_get_driver_tag: rqs[2808]: 0xffff00211d208100
     Line 1322997:  irq/1161-hisi_s-7602    [012] d..1 893.427814:
blk_mq_put_tag_in_free_request: rqs[2808]: 0xffff00211d208100
     Line 1331257:            <...>-20189   [013] .... 893.462663:
blk_mq_get_driver_tag: rqs[2860]: 0xffff00211d208100
     Line 1331289:  irq/1161-hisi_s-7602    [012] d..1 893.462785:
blk_mq_put_tag_in_free_request: rqs[2860]: 0xffff00211d208100
     Line 1338493:            <...>-20189   [013] .... 893.493519:
blk_mq_get_driver_tag: rqs[2921]: 0xffff00211d208100

As we can see this rq is allocated to tag[2808] once, and finially come to
tag[2921], but rqs[2808] still save the pointer.
Yeah, we know this kind of handling, but not see it as issue.

There will be no problem until we encounter a rare situation.

For example, tag[2808] is reassigned to another hctx for execution, then
some IO meet some error.
I guess the race is triggered when 2808 is just assigned, meantime
->rqs[] isn't updated.


As we shared tag between hctx, so if 2808 was assinged to other hctx.

So previous hctx's rqs will not updated。


Before waking up the error handle thread, SCSI compares the values of
scsi_host_busy() and shost->host_failed.

If the values are different, SCSI waits for the completion of some I/Os.
According to the print provided by (1), the return value of scsi_host_busy()
should be 7 for tag [2808] is calculated twice,

and the value of shost->host_failed is 6. As a result, this two values are
never equal, and error handle cannot be triggered.


A temporary workaround is provided and can solve the problem as:

diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c
index 2a37731..e3dc773 100644
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -190,6 +190,7 @@ void blk_mq_put_tag(struct blk_mq_tags *tags, struct
blk_mq_ctx *ctx,
                 BUG_ON(tag >= tags->nr_reserved_tags);
                 sbitmap_queue_clear(tags->breserved_tags, tag, ctx->cpu);
         }
+       tags->rqs[tag] = NULL;
  }


Since we did not encounter this problem in some previous kernel versions, we
wondered if the community already knew about the problem or could provide
some solutions.
Can you try the following patch?


I tested it. it can fix the bug.


However, if there is still a problem in the following scenario? For example, driver tag 0 is assigned

to rq0 in hctx0, and reclaimed after rq completed. Next time driver tag 0 is still assigned to rq0 but

in hctx1. So at this time,  bt_tags_iter will still got two rqs.


Thanks

Jiaxing



diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c
index 86f87346232a..97557ba0737f 100644
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -301,7 +301,7 @@ static bool bt_tags_iter(struct sbitmap *bitmap, unsigned int bitnr, void *data)
  		return true;
if (!(iter_data->flags & BT_TAG_ITER_STARTED) ||
-	    blk_mq_request_started(rq))
+	    (blk_mq_request_started(rq) && rq->tag == bitnr))
  		ret = iter_data->fn(rq, iter_data->data, reserved);
  	if (!iter_static_rqs)
  		blk_mq_put_rq_ref(rq);



Thanks,
Ming


.





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux