Re: [smartpqi updates V2 PATCH 6/9] smartpqi: add PCI-ID for new ntcom controller

[John Donnelly <john.p.donnelly@xxxxxxxxxx>]

On 7/13/21 4:02 PM, Don Brace wrote:
> From: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
>
> Add support for Norsi ntcom Raid-24i controller
> VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161
>
> Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
> Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
> Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
> Signed-off-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
> Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>


Acked-by:  John Donnelly <john.p.donnelly@xxxxxxxxxx>


> ---
>   drivers/scsi/smartpqi/smartpqi_init.c | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
> index ffc7ca221e27..c0b181ba795c 100644
> --- a/drivers/scsi/smartpqi/smartpqi_init.c
> +++ b/drivers/scsi/smartpqi/smartpqi_init.c
> @@ -9181,6 +9181,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
>   		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
>   			       PCI_VENDOR_ID_GIGABYTE, 0x1000)
>   	},
> +	{
> +		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> +			       0x1dfc, 0x3161)
> +	},
>   	{
>   		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
>   			       PCI_ANY_ID, PCI_ANY_ID)