Re: [smartpqi updates V2 PATCH 1/9] smartpqi: add pci ids for H3C P4408 controllers

[John Donnelly <john.p.donnelly@xxxxxxxxxx>]

On 7/13/21 4:02 PM, Don Brace wrote:
> From: Mahesh Rajashekhara <mahesh.rajashekhara@xxxxxxxxxxxxx>
>
> Add support for H3C P4408-Ma-8i-2GB device ID
>       VID_9005, DID_028F, SVID_193D and SDID_1108
>       VID_9005, DID_028F, SVID_193D and SDID_1109
>
> Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
> Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
> Reviewed-by: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx>
> Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
> Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@xxxxxxxxxxxxx>
> Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>

 John Donnelly <john.p.donnelly@xxxxxxxxxx>

> ---
>   drivers/scsi/smartpqi/smartpqi_init.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
> index dcc0b9618a64..64ea4650ca10 100644
> --- a/drivers/scsi/smartpqi/smartpqi_init.c
> +++ b/drivers/scsi/smartpqi/smartpqi_init.c
> @@ -8711,6 +8711,14 @@ static const struct pci_device_id pqi_pci_id_table[] = {
>   		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
>   			       0x193d, 0x1107)
>   	},
> +	{
> +		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> +			       0x193d, 0x1108)
> +	},
> +	{
> +		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> +			       0x193d, 0x1109)
> +	},
>   	{
>   		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
>   			       0x193d, 0x8460)