RE: [PATCH 13/15] scsi: ufs: ufs-exynos: support exynosauto v9 ufs driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > +/* FSYS UFS Sharability */
> 
> Sharability -> Shareability

Typo. I'll correct it next patchset.

> 
> > +#define UFS_WR_SHARABLE                BIT(2)
> > +#define UFS_RD_SHARABLE                BIT(1)
> > +#define UFS_SHARABLE           (UFS_WR_SHARABLE | UFS_RD_SHARABLE)
> > +#define UFS_SHARABILITY_OFFSET 0x710
> > +
> >  enum {
> >         UNIPRO_L1_5 = 0,/* PHY Adapter */
> >         UNIPRO_L2,      /* Data Link */
> > @@ -151,6 +158,80 @@ static int exynos7_ufs_drv_init(struct device *dev,
> struct exynos_ufs *ufs)
> >         return 0;
> >  }
> >
> > +static int exynosauto_ufs_drv_init(struct device *dev, struct
> > +exynos_ufs *ufs) {
> > +       struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr;
> > +
> > +       /* IO Coherency setting */
> > +       if (ufs->sysreg) {
> > +               return regmap_update_bits(ufs->sysreg,
> UFS_SHARABILITY_OFFSET,
> > +                                         UFS_SHARABLE, UFS_SHARABLE);
> > +       }
> > +
> > +       attr->tx_dif_p_nsec = 3200000;
> > +
> > +       return 0;
> > +}
> > +
> > +static int exynosauto_ufs_pre_link(struct exynos_ufs *ufs) {
> > +       struct ufs_hba *hba = ufs->hba;
> > +       int i;
> > +
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x40);
> > +       for_each_ufs_rx_lane(ufs, i) {
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x12, i),
> > +                              DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x11, i), 0x0);
> > +
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1b, i), 0x2);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1c, i), 0x8a);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1d, i), 0xa3);
> > +
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1b, i), 0x2);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1c, i), 0x8a);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x1d, i), 0xa3);
> > +
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x2f, i), 0x79);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x84, i), 0x1);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x25, i), 0xf6);
> > +       }
> > +
> > +       for_each_ufs_tx_lane(ufs, i) {
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xaa, i),
> > +                              DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xa9, i), 0x02);
> > +
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xab, i), 0x8);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xac, i), 0x22);
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xad, i), 0x8);
> > +
> > +               ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x04, i), 0x1);
> > +       }
> > +
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x0);
> > +
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0x0);
> > +
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(0xa011), 0x8000);
> > +
> > +       return 0;
> > +}
> > +
> > +static int exynosauto_ufs_pre_pwr_change(struct exynos_ufs *ufs,
> > +                                        struct ufs_pa_layer_attr
> > +*pwr) {
> > +       struct ufs_hba *hba = ufs->hba;
> > +
> > +       /* PACP_PWR_req and delivered to the remote DME */
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), 12000);
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), 32000);
> > +       ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), 16000);
> > +
> > +       return 0;
> > +}
> > +
> 
> No need for double line.

Will be fixed as well. :)

> 
> > +
> >  static int exynos7_ufs_pre_link(struct exynos_ufs *ufs)  {
> >         struct ufs_hba *hba = ufs->hba; @@ -1305,6 +1386,20 @@ static
> > struct exynos_ufs_uic_attr exynos7_uic_attr = {
> >         .pa_dbg_option_suite            = 0x30103,
> >  };
> >
> > +static struct exynos_ufs_drv_data exynosauto_ufs_drvs = {
> > +       .uic_attr               = &exynos7_uic_attr,
> > +       .quirks                 = UFSHCD_QUIRK_PRDT_BYTE_GRAN |
> > +                                 UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR |
> > +                                 UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
> > +                                 UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING,
> > +       .opts                   = EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
> > +                                 EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR |
> > +                                 EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
> > +       .drv_init               = exynosauto_ufs_drv_init,
> > +       .pre_link               = exynosauto_ufs_pre_link,
> > +       .pre_pwr_change         = exynosauto_ufs_pre_pwr_change,
> > +};
> > +
> >  static struct exynos_ufs_drv_data exynos_ufs_drvs = {
> >         .uic_attr               = &exynos7_uic_attr,
> >         .quirks                 = UFSHCD_QUIRK_PRDT_BYTE_GRAN |
> > @@ -1330,6 +1425,8 @@ static struct exynos_ufs_drv_data
> > exynos_ufs_drvs = {  static const struct of_device_id
> exynos_ufs_of_match[] = {
> >         { .compatible = "samsung,exynos7-ufs",
> >           .data       = &exynos_ufs_drvs },
> > +       { .compatible = "samsung,exynosautov9-ufs",
> > +         .data       = &exynosauto_ufs_drvs },
> 
> This compatible is not documented. It seems that no one document exynos7-
> ufs but that's not an excuse. :)

Hmm. Let me check whether I can add ufs-exynos.yaml.

Best Regards,
Chanho Park





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux