From: Paul Menzel [mailto:pmenzel@xxxxxxxxxxxxx] Subject: Re: [smartpqi updates PATCH 4/9] smartpqi: add SCSI cmd info for resets Dear Murthy, dear Don, Am 06.07.21 um 20:16 schrieb Don Brace: > From: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx> > > Report on SCSI command that has triggered the reset. > - Also add check for 0 length SCSI commands. Can you please add an example log message line to the git commit message summary? Don: Thanks for your review. I added an example. Kind regards, Paul > Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx> > Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx> > Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx> > Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx> > Signed-off-by: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx> > Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx> > --- > drivers/scsi/smartpqi/smartpqi_init.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/scsi/smartpqi/smartpqi_init.c > b/drivers/scsi/smartpqi/smartpqi_init.c > index 5ce1c41a758d..c2ddb66b5c2d 100644 > --- a/drivers/scsi/smartpqi/smartpqi_init.c > +++ b/drivers/scsi/smartpqi/smartpqi_init.c > @@ -6033,8 +6033,10 @@ static int pqi_eh_device_reset_handler(struct scsi_cmnd *scmd) > mutex_lock(&ctrl_info->lun_reset_mutex); > > dev_err(&ctrl_info->pci_dev->dev, > - "resetting scsi %d:%d:%d:%d\n", > - shost->host_no, device->bus, device->target, device->lun); > + "resetting scsi %d:%d:%d:%d due to cmd 0x%02x\n", > + shost->host_no, > + device->bus, device->target, device->lun, > + scmd->cmd_len > 0 ? scmd->cmnd[0] : 0xff); > > pqi_check_ctrl_health(ctrl_info); > if (pqi_ctrl_offline(ctrl_info)) >
