The NVME support indicator in log message 6422 is displaying a field
that was initialized but never set to indicate NVME support. Remove
obsolete nvme_support element from the lpfc_hba structure and change
log message to display NVME support status as reported in SLI4 Config
Parameters mailbox command.
Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc.h | 1 -
drivers/scsi/lpfc/lpfc_init.c | 3 +--
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 17028861234b..dd3ddfa5f761 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -922,7 +922,6 @@ struct lpfc_hba {
uint8_t wwpn[8];
uint32_t RandomData[7];
uint8_t fcp_embed_io;
- uint8_t nvme_support; /* Firmware supports NVME */
uint8_t nvmet_support; /* driver supports NVMET */
#define LPFC_NVMET_MAX_PORTS 32
uint8_t mds_diags_support;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f3032e30c3e4..cf5bfd27058a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12241,7 +12241,6 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
bf_get(cfg_xib, mbx_sli4_parameters),
phba->cfg_enable_fc4_type);
fcponly:
- phba->nvme_support = 0;
phba->nvmet_support = 0;
phba->cfg_nvmet_mrq = 0;
phba->cfg_nvme_seg_cnt = 0;
@@ -12299,7 +12298,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
"6422 XIB %d PBDE %d: FCP %d NVME %d %d %d\n",
bf_get(cfg_xib, mbx_sli4_parameters),
phba->cfg_enable_pbde,
- phba->fcp_embed_io, phba->nvme_support,
+ phba->fcp_embed_io, sli4_params->nvme,
phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);
if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
--
2.26.2
