We found that offline a sata device on hisi sas control and then
scanning the host can probe 255 not-existant devices into system.
[root@localhost ~]# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
1) echo "offline" > /sys/block/sdb/device/state
2) echo "- - -" > /sys/class/scsi_host/host2/scan
Then, we can see another 255 non-existant devices in system:
[root@localhost ~]# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After REPORT LUN command issued to the offline device fail, it tries
to do a sequential scan and probe all devices whose lun is not 0
successfully.
To fix the problem, we try to do same things as commit 2fc62e2ac350
("[SCSI] libsas: disable scanning lun > 0 on ata devices"), which
will prevent the device whose lun number is not zero probe into system.
Reported-by: Wu Bo <wubo40@xxxxxxxxxx>
Suggested-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Yufen Yu <yuyufen@xxxxxxxxxx>
---
drivers/scsi/aic94xx/aic94xx_init.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
drivers/scsi/isci/init.c | 1 +
drivers/scsi/libsas/sas_scsi_host.c | 9 +++++++++
drivers/scsi/mvsas/mv_init.c | 1 +
drivers/scsi/pm8001/pm8001_init.c | 1 +
8 files changed, 16 insertions(+)
v2->v3:
simplify commit log and fix some spelling error
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a195bfe9eccc..7a78606598c4 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -53,6 +53,7 @@ static struct scsi_host_template aic94xx_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3e359ac752fd..15eaac3a4eb6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1771,6 +1771,7 @@ static struct scsi_host_template sht_v1_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 46f60fc2a069..9df1639ffa65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3584,6 +3584,7 @@ static struct scsi_host_template sht_v2_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e95408314078..36ec3901cfd4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3155,6 +3155,7 @@ static struct scsi_host_template sht_v3_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index c452849e7bb4..ffd33e5decae 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
.eh_abort_handler = sas_eh_abort_handler,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..ee44a0d7730b 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
blk_abort_request(sc->request);
}
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+ if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+ return -ENXIO;
+
+ return 0;
+}
+
void sas_target_destroy(struct scsi_target *starget)
{
struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
EXPORT_SYMBOL_GPL(sas_phy_reset);
EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
EXPORT_SYMBOL_GPL(sas_target_destroy);
EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 6aa2697c4a15..b03c0f35d7b0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -46,6 +46,7 @@ static struct scsi_host_template mvs_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index af09bd282cb9..313248c7bab9 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -101,6 +101,7 @@ static struct scsi_host_template pm8001_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
--
2.25.4
