Re: [RFC PATCH V3 04/11] HV: Add Write/Read MSR registers via ghcb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, May 30, 2021 at 11:06:21AM -0400, Tianyu Lan wrote:
> +void hv_ghcb_msr_write(u64 msr, u64 value)
> +{
> +	union hv_ghcb *hv_ghcb;
> +	void **ghcb_base;
> +	unsigned long flags;
> +
> +	if (!ms_hyperv.ghcb_base)
> +		return;
> +
> +	local_irq_save(flags);
> +	ghcb_base = (void **)this_cpu_ptr(ms_hyperv.ghcb_base);
> +	hv_ghcb = (union hv_ghcb *)*ghcb_base;
> +	if (!hv_ghcb) {
> +		local_irq_restore(flags);
> +		return;
> +	}
> +
> +	memset(hv_ghcb, 0x00, HV_HYP_PAGE_SIZE);
> +
> +	hv_ghcb->ghcb.protocol_version = 1;
> +	hv_ghcb->ghcb.ghcb_usage = 0;
> +
> +	ghcb_set_sw_exit_code(&hv_ghcb->ghcb, SVM_EXIT_MSR);
> +	ghcb_set_rcx(&hv_ghcb->ghcb, msr);
> +	ghcb_set_rax(&hv_ghcb->ghcb, lower_32_bits(value));
> +	ghcb_set_rdx(&hv_ghcb->ghcb, value >> 32);
> +	ghcb_set_sw_exit_info_1(&hv_ghcb->ghcb, 1);
> +	ghcb_set_sw_exit_info_2(&hv_ghcb->ghcb, 0);
> +
> +	VMGEXIT();

This is not safe to use from NMI context. You need at least some
checking or WARN_ON/assertion/whatever to catch cases where this is
violated. Otherwise it will result in some hard to debug bug reports.

Regards,

	Joerg



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux