[PATCH v10 01/12] scsi: ufshpb: Cache HPB Control mode on init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We will use it later, when we'll need to differentiate between device
and host control modes.

Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
Reviewed-by: Daejun Park <daejun7.park@xxxxxxxxxxx>
---
 drivers/scsi/ufs/ufshcd.h | 2 ++
 drivers/scsi/ufs/ufshpb.c | 8 +++++---
 drivers/scsi/ufs/ufshpb.h | 2 ++
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d902414e4a6f..ccb1bccf6380 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -654,6 +654,7 @@ struct ufs_hba_variant_params {
  * @hpb_disabled: flag to check if HPB is disabled
  * @max_hpb_single_cmd: maximum size of single HPB command
  * @is_legacy: flag to check HPB 1.0
+ * @control_mode: either host or device
  */
 struct ufshpb_dev_info {
 	int num_lu;
@@ -663,6 +664,7 @@ struct ufshpb_dev_info {
 	bool hpb_disabled;
 	int max_hpb_single_cmd;
 	bool is_legacy;
+	u8 control_mode;
 };
 #endif
 
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index 1e60772be40c..d45343a00e9f 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -1614,6 +1614,9 @@ static void ufshpb_lu_parameter_init(struct ufs_hba *hba,
 				 % (hpb->srgn_mem_size / HPB_ENTRY_SIZE);
 
 	hpb->pages_per_srgn = DIV_ROUND_UP(hpb->srgn_mem_size, PAGE_SIZE);
+
+	if (hpb_dev_info->control_mode == HPB_HOST_CONTROL)
+		hpb->is_hcm = true;
 }
 
 static int ufshpb_alloc_region_tbl(struct ufs_hba *hba, struct ufshpb_lu *hpb)
@@ -2305,11 +2308,10 @@ void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
 {
 	struct ufshpb_dev_info *hpb_dev_info = &hba->ufshpb_dev;
 	int version, ret;
-	u8 hpb_mode;
 	u32 max_hpb_single_cmd = HPB_MULTI_CHUNK_LOW;
 
-	hpb_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
-	if (hpb_mode == HPB_HOST_CONTROL) {
+	hpb_dev_info->control_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
+	if (hpb_dev_info->control_mode == HPB_HOST_CONTROL) {
 		dev_err(hba->dev, "%s: host control mode is not supported.\n",
 			__func__);
 		hpb_dev_info->hpb_disabled = true;
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index b1128b0ce486..7df30340386a 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -228,6 +228,8 @@ struct ufshpb_lu {
 	u32 entries_per_srgn_shift;
 	u32 pages_per_srgn;
 
+	bool is_hcm;
+
 	struct ufshpb_stats stats;
 	struct ufshpb_params params;
 
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux