+ codeaurora guys ( Can and Asutosh) > -----Original Message----- > From: Felipe Balbi <balbi@xxxxxxxxxx> > Sent: 03 June 2021 19:56 > To: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>; Avri Altman > <avri.altman@xxxxxxx>; James E.J. Bottomley <jejb@xxxxxxxxxxxxx>; > Martin K. Petersen <martin.petersen@xxxxxxxxxx>; linux- > scsi@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx > Subject: UFS failures with v5.13-rc4 > > > Hi guys, > > Today I managed to trigger some pretty bad faults with with v5.13-rc4 > running on SM8150 (Snapdragon) and iozone. > > It seems the problem only happens when using bfq iosched, as I couldn't > trigger it with mq-deadline. > > Here's the relevant snippet of console logs, full dmesg.txt attached. > > # echo bfq > /sys/block/sdg/queue/scheduler # iozone -i 0 -R -t 8 -s 1G -r > 16M -b /tmp/iozone-bfq.xls -F /mnt/file0 /mnt/file1 /mnt/file2 /mnt/file3 > /mnt/file4 /mnt/file5 /mnt/file6 /mnt/file7 > Iozone: Performance Test of File I/O > Version $Revision: 3.489 $ > Compiled for 64 bit mode. > Build: linux > > Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins > Al Slater, Scott Rhine, Mike Wisner, Ken Goss > Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, > Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, > Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, > Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, > Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, > Vangel Bojaxhi, Ben England, Vikentsi Lapa, > Alexey Skidanov, Sudhir Kumar. > > Run began: Thu Jan 1 02:29:50 1970 > > Excel chart generation enabled > File size set to 1048576 kB > Record Size 16384 kB > Command line used: iozone -i 0 -R -t 8 -s 1G -r 16M -b /tmp/iozone- > bfq.xls -F /mnt/file0 /mnt/file1 /mnt/file2 /mnt/file3 /mnt/file4 /mnt/file5 > /mnt/file6 /mnt/fil > e7 > Output is in kBytes/sec > Time Resolution = 0.000001 seconds. > Processor cache size set to 1024 kBytes. > Processor cache line size set to 32 bytes. > File stride size set to 17 * record size. > Throughput test with 8 processes > Each process writes a 1048576 kByte file in 16384 kByte records [ > 2475.173128] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task > management cmd 0x80 timed-out [ 2475.182205] ufshcd-qcom > 1d84000.ufshc: ufshcd_try_to_abort_task: no response from device. tag = 0, > err -110 [ 2475.252049] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.317224] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.382038] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.447318] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.453450] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: > Host init failed -5 [ 2475.522779] ufshcd-qcom 1d84000.ufshc: Controller > enable failed [ 2475.587983] ufshcd-qcom 1d84000.ufshc: Controller enable > failed [ 2475.653027] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.719555] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.725690] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: > Host init failed -5 [ 2475.795173] ufshcd-qcom 1d84000.ufshc: Controller > enable failed [ 2475.861232] ufshcd-qcom 1d84000.ufshc: Controller enable > failed [ 2475.926035] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.991184] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2475.997382] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: > Host init failed -5 [ 2476.064948] ufshcd-qcom 1d84000.ufshc: Controller > enable failed [ 2476.129955] ufshcd-qcom 1d84000.ufshc: Controller enable > failed [ 2476.194502] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2476.259851] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2476.265962] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: > Host init failed -5 [ 2476.334428] ufshcd-qcom 1d84000.ufshc: Controller > enable failed [ 2476.399788] ufshcd-qcom 1d84000.ufshc: Controller enable > failed [ 2476.465468] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2476.529965] ufshcd-qcom 1d84000.ufshc: Controller enable failed [ > 2476.536086] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: > Host init failed -5 [ 2476.544523] ufshcd-qcom 1d84000.ufshc: > ufshcd_err_handler: reset and restore failed with err -5 [ 2476.606521] sd > 0:0:0:6: [sdg] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 > driverbyte=0x00 cmd_age=0s [ 2476.615917] sd 0:0:0:6: [sdg] tag#0 CDB: > opcode=0x2a 2a 00 00 35 b5 7c 00 00 10 00 [ 2476.623715] > blk_update_request: I/O error, dev sdg, sector 28158944 op 0x1:(WRITE) > flags 0x4000 phys_seg 16 prio class 0
