[PATCH V2] qedf: Update the max_id value in host structure.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Saurav Kashyap <skashyap@xxxxxxxxxxx>

  The max_id value defines the max id of the target that stack
  can scan during manual scanning through scsi_host sysfs interface.
  If default value is 8, update the value to the max sessions driver support.

Signed-off-by: Saurav Kashyap <skashyap@xxxxxxxxxxx>
Signed-off-by: Javed Hasan <jhasan@xxxxxxxxxxx>
---
Changes in v2:
 - Added description and signed-off.
---
 drivers/scsi/qedf/qedf_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index c5f37277..322046f4 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -2089,6 +2089,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled)
 	vn_port->host->max_lun = qedf_max_lun;
 	vn_port->host->sg_tablesize = QEDF_MAX_BDS_PER_CMD;
 	vn_port->host->max_cmd_len = QEDF_MAX_CDB_LEN;
+	vn_port->host->max_id = QEDF_MAX_SESSIONS;
 
 	rc = scsi_add_host(vn_port->host, &vport->dev);
 	if (rc) {
@@ -3855,6 +3856,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 		host->transportt = qedf_fc_transport_template;
 		host->max_lun = qedf_max_lun;
 		host->max_cmd_len = QEDF_MAX_CDB_LEN;
+		host->max_id = QEDF_MAX_SESSIONS;
 #ifdef USE_BLK_MQ
 		host->use_blk_mq = qedf_use_blk_mq;
 		if (shost_use_blk_mq(host)) {
-- 
2.18.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux