In ipr dual adapter configurations, the ipr adapter firmware
may require an adapter reset for various reasons. The reset
is requested by the adapter firmware logging an error with
an IOASC of 0x02048000. Add support to log this error, and
reset the adapter.
Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/ipr.c | 14 ++++++++++++--
drivers/scsi/ipr.h | 1 +
2 files changed, 13 insertions(+), 2 deletions(-)
diff -puN drivers/scsi/ipr.h~ipr_reset_request drivers/scsi/ipr.h
--- linux-2.6/drivers/scsi/ipr.h~ipr_reset_request 2007-04-26 09:17:46.000000000 -0500
+++ linux-2.6-bjking1/drivers/scsi/ipr.h 2007-04-26 09:17:46.000000000 -0500
@@ -91,6 +91,7 @@
* IOASCs
*/
#define IPR_IOASC_NR_INIT_CMD_REQUIRED 0x02040200
+#define IPR_IOASC_NR_IOA_RESET_REQUIRED 0x02048000
#define IPR_IOASC_SYNC_REQUIRED 0x023f0000
#define IPR_IOASC_MED_DO_NOT_REALLOC 0x03110C00
#define IPR_IOASC_HW_SEL_TIMEOUT 0x04050000
diff -puN drivers/scsi/ipr.c~ipr_reset_request drivers/scsi/ipr.c
--- linux-2.6/drivers/scsi/ipr.c~ipr_reset_request 2007-04-26 09:17:46.000000000 -0500
+++ linux-2.6-bjking1/drivers/scsi/ipr.c 2007-04-26 09:17:46.000000000 -0500
@@ -206,6 +206,8 @@ struct ipr_error_table_t ipr_error_table
"8009: Impending cache battery pack failure"},
{0x02040400, 0, 0,
"34FF: Disk device format in progress"},
+ {0x02048000, 0, IPR_DEFAULT_LOG_LEVEL,
+ "9070: IOA requested reset"},
{0x023F0000, 0, 0,
"Synchronization required"},
{0x024E0000, 0, 0,
@@ -1672,12 +1674,15 @@ static void ipr_process_error(struct ipr
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
list_del(&hostrcb->queue);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
if (!ioasc) {
ipr_handle_log_data(ioa_cfg, hostrcb);
+ if (fd_ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED)
+ ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_ABBREV);
} else if (ioasc != IPR_IOASC_IOA_WAS_RESET) {
dev_err(&ioa_cfg->pdev->dev,
"Host RCB failed with IOASC: 0x%08X\n", ioasc);
@@ -6296,6 +6301,7 @@ static void ipr_get_unit_check_buffer(st
struct ipr_hostrcb *hostrcb;
struct ipr_uc_sdt sdt;
int rc, length;
+ u32 ioasc;
mailbox = readl(ioa_cfg->ioa_mailbox);
@@ -6328,9 +6334,13 @@ static void ipr_get_unit_check_buffer(st
(__be32 *)&hostrcb->hcam,
min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
- if (!rc)
+ if (!rc) {
ipr_handle_log_data(ioa_cfg, hostrcb);
- else
+ ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
+ if (ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED &&
+ ioa_cfg->sdt_state == GET_DUMP)
+ ioa_cfg->sdt_state = WAIT_FOR_DUMP;
+ } else
ipr_unit_check_no_data(ioa_cfg);
list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
_
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
