[PATCH 1/1] scsi: Fix spelling mistakes in header files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix some spelling mistakes in comments:
pathes ==> paths
Resouce ==> Resource
retreived ==> retrieved
keep-alives ==> keep-alive
recevied ==> received
busses ==> buses
interruped ==> interrupted

Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
 include/scsi/iscsi_proto.h    | 2 +-
 include/scsi/libfc.h          | 6 +++---
 include/scsi/libfcoe.h        | 2 +-
 include/scsi/scsi_bsg_iscsi.h | 2 +-
 include/scsi/scsi_host.h      | 2 +-
 include/scsi/sg.h             | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index b71b5c4f418c..7b192d88f186 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -52,7 +52,7 @@ static inline int iscsi_sna_gte(u32 n1, u32 n2)
 }
 
 /*
- * useful common(control and data pathes) macro
+ * useful common(control and data paths) macro
  */
 #define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2]))
 #define hton24(p, v) { \
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 9b87e1a1c646..eeb8d689ff6b 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -399,7 +399,7 @@ struct fc_seq {
  * @sid:          Source FCID
  * @did:          Destination FCID
  * @esb_stat:     ESB exchange status
- * @r_a_tov:      Resouce allocation time out value (in msecs)
+ * @r_a_tov:      Resource allocation time out value (in msecs)
  * @seq_id:       The next sequence ID to use
  * @encaps:       encapsulation information for lower-level driver
  * @f_ctl:        F_CTL flags for the sequence
@@ -668,7 +668,7 @@ enum fc_lport_event {
  * @wwnn:                  World Wide Node Name
  * @service_params:        Common service parameters
  * @e_d_tov:               Error detection timeout value
- * @r_a_tov:               Resouce allocation timeout value
+ * @r_a_tov:               Resource allocation timeout value
  * @rnid_gen:              RNID information
  * @sg_supp:               Indicates if scatter gather is supported
  * @seq_offload:           Indicates if sequence offload is supported
@@ -841,7 +841,7 @@ static inline void fc_lport_free_stats(struct fc_lport *lport)
 
 /**
  * lport_priv() - Return the private data from a local port
- * @lport: The local port whose private data is to be retreived
+ * @lport: The local port whose private data is to be retrieved
  */
 static inline void *lport_priv(const struct fc_lport *lport)
 {
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index fac8e89aed81..089aa1f201ac 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -87,7 +87,7 @@ enum fip_mode {
  * @port_ka_time:  time of next port keep-alive.
  * @ctlr_ka_time:  time of next controller keep-alive.
  * @timer:	   timer struct used for all delayed events.
- * @timer_work:	   &work_struct for doing keep-alives and resets.
+ * @timer_work:	   &work_struct for doing keep-alive and resets.
  * @recv_work:	   &work_struct for receiving FIP frames.
  * @fip_recv_list: list of received FIP frames.
  * @flogi_req:	   clone of FLOGI request sent
diff --git a/include/scsi/scsi_bsg_iscsi.h b/include/scsi/scsi_bsg_iscsi.h
index 6b8128005af8..9b1f0f424a79 100644
--- a/include/scsi/scsi_bsg_iscsi.h
+++ b/include/scsi/scsi_bsg_iscsi.h
@@ -84,7 +84,7 @@ struct iscsi_bsg_reply {
 	 */
 	uint32_t result;
 
-	/* If there was reply_payload, how much was recevied ? */
+	/* If there was reply_payload, how much was received ? */
 	uint32_t reply_payload_rcv_len;
 
 	union {
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d0bf88d77f02..9448225a9904 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -582,7 +582,7 @@ struct Scsi_Host {
 
 	/*
 	 * These three parameters can be used to allow for wide scsi,
-	 * and for host adapters that support multiple busses
+	 * and for host adapters that support multiple buses
 	 * The last two should be set to 1 more than the actual max id
 	 * or lun (e.g. 8 for SCSI parallel systems).
 	 */
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
index 7327e12f3373..e1a42c2409cc 100644
--- a/include/scsi/sg.h
+++ b/include/scsi/sg.h
@@ -145,7 +145,7 @@ typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
 
 typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
     char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
-    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char orphan;        /* 0 -> normal request, 1 -> from interrupted SG_IO */
     char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
     char problem;       /* 0 -> no problem detected, 1 -> error to report */
     int pack_id;        /* pack_id associated with request */
-- 
2.25.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux