On Wed, 5 May 2021 17:31:03 +0530, ajish.koshy@xxxxxxxxxxxxx wrote:
> Most of the time when driver is loaded after rmmod, during drive
> discovery few drives are not showing up in lsscsi command. Here
> sata drives are directly attached to the controller connected phys.
> During device discovery, following identify command (qc timeout
> (cmd 0xec)) is getting timedout during revalidation. This will trigger
> abort from host side and controller successfully aborts the command
> and returns success. Post this successful abort response ATA library
> decides to mark the disk as NODEV.
>
> [...]
Applied to 5.13/scsi-fixes, thanks!
[1/1] pm80xx: fix drive missing during rmmod & insmod in loop.
https://git.kernel.org/mkp/scsi/c/d1acd81bd6eb
--
Martin K. Petersen Oracle Linux Engineering
