When processing an nvme ERSP IU which didn't match the optimized
CQE-only path, the status was being left to the WQE status. WQE status
is non-zero as it is indicating a non-optimized completion that needs
to be handled by the driver.
Fix by clearing the status field when falling into the non-optimized
case. log message added to track optimized vs non-optimized debug.
Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_nvme.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 41e49f61fac2..bcc804cefd30 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1049,9 +1049,19 @@ lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
nCmd->transferred_length = wcqe->total_data_placed;
nCmd->rcv_rsplen = wcqe->parameter;
nCmd->status = 0;
- /* Sanity check */
- if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN)
+
+ /* Check if this is really an ERSP */
+ if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN) {
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ lpfc_ncmd->result = 0;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
+ "6084 NVME Completion ERSP: "
+ "xri %x placed x%x\n",
+ lpfc_ncmd->cur_iocbq.sli4_xritag,
+ wcqe->total_data_placed);
break;
+ }
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6081 NVME Completion Protocol Error: "
"xri %x status x%x result x%x "
--
2.26.2
