On 2021-05-14 12:19, Bart Van Assche wrote:
On 5/13/21 9:04 PM, Can Guo wrote:
Hi Bart,
On 2021-05-14 00:49, Bart Van Assche wrote:
With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a
request
and hence reduces the usable queue depth.
This is interesting. When all UFS queues are idle, in
hctx_may_queue(),
active_queues reads 1 (users == 1, depth == 32), where is it divided
by 2?
static inline bool hctx_may_queue(struct blk_mq_hw_ctx *hctx,
struct sbitmap_queue *bt)
{
unsigned int depth, users;
....
users = atomic_read(&hctx->tags->active_queues);
}
if (!users)
return true;
/*
* Allow at least some tags
*/
depth = max((bt->sb.depth + users - 1) / users, 4U);
return __blk_mq_active_requests(hctx) < depth;
}
Hi Can,
If no I/O scheduler has been configured then the active_queues counter
is increased from inside blk_get_request() by blk_mq_tag_busy() before
hctx_may_queue() is called. So if active_queues == 1 when the UFS
device
is idle, the active_queues counter will be increased to 2 if a request
is submitted to another request queue than hba->cmd_queue. This will
cause the hctx_may_queue() calls from inside __blk_mq_alloc_request()
and __blk_mq_get_driver_tag() to limit the queue depth to 32 / 2 = 16.
If an I/O scheduler has been configured then __blk_mq_get_driver_tag()
will be the first function to call blk_mq_tag_busy() while processing a
request. The hctx_may_queue() call in __blk_mq_get_driver_tag() will
limit the queue depth to 32 / 2 = 16 if an I/O scheduler has been
configured.
Bart.
Yes, I just figured out what you are saying from the commit message and
gave my reviewed-by tag. Thanks for the explanation and the fix.
Regards,
Can Guo.
