From: James Smart <jsmart2021@xxxxxxxxx> [ Upstream commit b62232ba8caccaf1954e197058104a6478fac1af ] SLI-4 does not contain a PORT_CAPABILITIES mailbox command (only SLI-3 does, and SLI-3 doesn't use it), yet there are SLI-4 code paths that have code to issue the command. The command will always fail. Remove the code for the mailbox command and leave only the resulting "failure path" logic. Link: https://lore.kernel.org/r/20210412013127.2387-12-jsmart2021@xxxxxxxxx Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx> Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx> Signed-off-by: James Smart <jsmart2021@xxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/lpfc/lpfc_crtn.h | 3 - drivers/scsi/lpfc/lpfc_hw4.h | 174 +--------------------------------- drivers/scsi/lpfc/lpfc_init.c | 103 +------------------- drivers/scsi/lpfc/lpfc_mbox.c | 36 ------- 4 files changed, 3 insertions(+), 313 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index bea24bc4410a..1a0b1cb9de78 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -56,9 +56,6 @@ void lpfc_register_new_vport(struct lpfc_hba *, struct lpfc_vport *, void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *); void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t); void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *); -void lpfc_supported_pages(struct lpfcMboxq *); -void lpfc_pc_sli4_params(struct lpfcMboxq *); -int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *); int lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *, struct lpfcMboxq *, uint16_t, uint16_t, bool); int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 083f8c8706e5..a9bd12bfc15e 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -122,6 +122,7 @@ struct lpfc_sli_intf { /* Define SLI4 Alignment requirements. */ #define LPFC_ALIGN_16_BYTE 16 #define LPFC_ALIGN_64_BYTE 64 +#define SLI4_PAGE_SIZE 4096 /* Define SLI4 specific definitions. */ #define LPFC_MQ_CQE_BYTE_OFFSET 256 @@ -2886,62 +2887,6 @@ struct lpfc_mbx_request_features { #define lpfc_mbx_rq_ftr_rsp_mrqp_WORD word3 }; -struct lpfc_mbx_supp_pages { - uint32_t word1; -#define qs_SHIFT 0 -#define qs_MASK 0x00000001 -#define qs_WORD word1 -#define wr_SHIFT 1 -#define wr_MASK 0x00000001 -#define wr_WORD word1 -#define pf_SHIFT 8 -#define pf_MASK 0x000000ff -#define pf_WORD word1 -#define cpn_SHIFT 16 -#define cpn_MASK 0x000000ff -#define cpn_WORD word1 - uint32_t word2; -#define list_offset_SHIFT 0 -#define list_offset_MASK 0x000000ff -#define list_offset_WORD word2 -#define next_offset_SHIFT 8 -#define next_offset_MASK 0x000000ff -#define next_offset_WORD word2 -#define elem_cnt_SHIFT 16 -#define elem_cnt_MASK 0x000000ff -#define elem_cnt_WORD word2 - uint32_t word3; -#define pn_0_SHIFT 24 -#define pn_0_MASK 0x000000ff -#define pn_0_WORD word3 -#define pn_1_SHIFT 16 -#define pn_1_MASK 0x000000ff -#define pn_1_WORD word3 -#define pn_2_SHIFT 8 -#define pn_2_MASK 0x000000ff -#define pn_2_WORD word3 -#define pn_3_SHIFT 0 -#define pn_3_MASK 0x000000ff -#define pn_3_WORD word3 - uint32_t word4; -#define pn_4_SHIFT 24 -#define pn_4_MASK 0x000000ff -#define pn_4_WORD word4 -#define pn_5_SHIFT 16 -#define pn_5_MASK 0x000000ff -#define pn_5_WORD word4 -#define pn_6_SHIFT 8 -#define pn_6_MASK 0x000000ff -#define pn_6_WORD word4 -#define pn_7_SHIFT 0 -#define pn_7_MASK 0x000000ff -#define pn_7_WORD word4 - uint32_t rsvd[27]; -#define LPFC_SUPP_PAGES 0 -#define LPFC_BLOCK_GUARD_PROFILES 1 -#define LPFC_SLI4_PARAMETERS 2 -}; - struct lpfc_mbx_memory_dump_type3 { uint32_t word1; #define lpfc_mbx_memory_dump_type3_type_SHIFT 0 @@ -3158,121 +3103,6 @@ struct user_eeprom { uint8_t reserved191[57]; }; -struct lpfc_mbx_pc_sli4_params { - uint32_t word1; -#define qs_SHIFT 0 -#define qs_MASK 0x00000001 -#define qs_WORD word1 -#define wr_SHIFT 1 -#define wr_MASK 0x00000001 -#define wr_WORD word1 -#define pf_SHIFT 8 -#define pf_MASK 0x000000ff -#define pf_WORD word1 -#define cpn_SHIFT 16 -#define cpn_MASK 0x000000ff -#define cpn_WORD word1 - uint32_t word2; -#define if_type_SHIFT 0 -#define if_type_MASK 0x00000007 -#define if_type_WORD word2 -#define sli_rev_SHIFT 4 -#define sli_rev_MASK 0x0000000f -#define sli_rev_WORD word2 -#define sli_family_SHIFT 8 -#define sli_family_MASK 0x000000ff -#define sli_family_WORD word2 -#define featurelevel_1_SHIFT 16 -#define featurelevel_1_MASK 0x000000ff -#define featurelevel_1_WORD word2 -#define featurelevel_2_SHIFT 24 -#define featurelevel_2_MASK 0x0000001f -#define featurelevel_2_WORD word2 - uint32_t word3; -#define fcoe_SHIFT 0 -#define fcoe_MASK 0x00000001 -#define fcoe_WORD word3 -#define fc_SHIFT 1 -#define fc_MASK 0x00000001 -#define fc_WORD word3 -#define nic_SHIFT 2 -#define nic_MASK 0x00000001 -#define nic_WORD word3 -#define iscsi_SHIFT 3 -#define iscsi_MASK 0x00000001 -#define iscsi_WORD word3 -#define rdma_SHIFT 4 -#define rdma_MASK 0x00000001 -#define rdma_WORD word3 - uint32_t sge_supp_len; -#define SLI4_PAGE_SIZE 4096 - uint32_t word5; -#define if_page_sz_SHIFT 0 -#define if_page_sz_MASK 0x0000ffff -#define if_page_sz_WORD word5 -#define loopbk_scope_SHIFT 24 -#define loopbk_scope_MASK 0x0000000f -#define loopbk_scope_WORD word5 -#define rq_db_window_SHIFT 28 -#define rq_db_window_MASK 0x0000000f -#define rq_db_window_WORD word5 - uint32_t word6; -#define eq_pages_SHIFT 0 -#define eq_pages_MASK 0x0000000f -#define eq_pages_WORD word6 -#define eqe_size_SHIFT 8 -#define eqe_size_MASK 0x000000ff -#define eqe_size_WORD word6 - uint32_t word7; -#define cq_pages_SHIFT 0 -#define cq_pages_MASK 0x0000000f -#define cq_pages_WORD word7 -#define cqe_size_SHIFT 8 -#define cqe_size_MASK 0x000000ff -#define cqe_size_WORD word7 - uint32_t word8; -#define mq_pages_SHIFT 0 -#define mq_pages_MASK 0x0000000f -#define mq_pages_WORD word8 -#define mqe_size_SHIFT 8 -#define mqe_size_MASK 0x000000ff -#define mqe_size_WORD word8 -#define mq_elem_cnt_SHIFT 16 -#define mq_elem_cnt_MASK 0x000000ff -#define mq_elem_cnt_WORD word8 - uint32_t word9; -#define wq_pages_SHIFT 0 -#define wq_pages_MASK 0x0000ffff -#define wq_pages_WORD word9 -#define wqe_size_SHIFT 8 -#define wqe_size_MASK 0x000000ff -#define wqe_size_WORD word9 - uint32_t word10; -#define rq_pages_SHIFT 0 -#define rq_pages_MASK 0x0000ffff -#define rq_pages_WORD word10 -#define rqe_size_SHIFT 8 -#define rqe_size_MASK 0x000000ff -#define rqe_size_WORD word10 - uint32_t word11; -#define hdr_pages_SHIFT 0 -#define hdr_pages_MASK 0x0000000f -#define hdr_pages_WORD word11 -#define hdr_size_SHIFT 8 -#define hdr_size_MASK 0x0000000f -#define hdr_size_WORD word11 -#define hdr_pp_align_SHIFT 16 -#define hdr_pp_align_MASK 0x0000ffff -#define hdr_pp_align_WORD word11 - uint32_t word12; -#define sgl_pages_SHIFT 0 -#define sgl_pages_MASK 0x0000000f -#define sgl_pages_WORD word12 -#define sgl_pp_align_SHIFT 16 -#define sgl_pp_align_MASK 0x0000ffff -#define sgl_pp_align_WORD word12 - uint32_t rsvd_13_63[51]; -}; #define SLI4_PAGE_ALIGN(addr) (((addr)+((SLI4_PAGE_SIZE)-1)) \ &(~((SLI4_PAGE_SIZE)-1))) @@ -3854,8 +3684,6 @@ struct lpfc_mqe { struct lpfc_mbx_post_hdr_tmpl hdr_tmpl; struct lpfc_mbx_query_fw_config query_fw_cfg; struct lpfc_mbx_set_beacon_config beacon_config; - struct lpfc_mbx_supp_pages supp_pages; - struct lpfc_mbx_pc_sli4_params sli4_params; struct lpfc_mbx_get_sli4_parameters get_sli4_parameters; struct lpfc_mbx_set_link_diag_state link_diag_state; struct lpfc_mbx_set_link_diag_loopback link_diag_loopback; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 57510a831735..c6caacaa3e7a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5854,8 +5854,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) LPFC_MBOXQ_t *mboxq; MAILBOX_t *mb; int rc, i, max_buf_size; - uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0}; - struct lpfc_mqe *mqe; int longs; int fof_vectors = 0; int extra; @@ -6150,32 +6148,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_nvme_mod_param_dep(phba); - /* Get the Supported Pages if PORT_CAPABILITIES is supported by port. */ - lpfc_supported_pages(mboxq); - rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); - if (!rc) { - mqe = &mboxq->u.mqe; - memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3), - LPFC_MAX_SUPPORTED_PAGES); - for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) { - switch (pn_page[i]) { - case LPFC_SLI4_PARAMETERS: - phba->sli4_hba.pc_sli4_params.supported = 1; - break; - default: - break; - } - } - /* Read the port's SLI4 Parameters capabilities if supported. */ - if (phba->sli4_hba.pc_sli4_params.supported) - rc = lpfc_pc_sli4_params_get(phba, mboxq); - if (rc) { - mempool_free(mboxq, phba->mbox_mem_pool); - rc = -EIO; - goto out_free_bsmbx; - } - } - /* * Get sli4 parameters that override parameters from Port capabilities. * If this call fails, it isn't critical unless the SLI4 parameters come @@ -10517,78 +10489,6 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) phba->pport->work_port_events = 0; } - /** - * lpfc_pc_sli4_params_get - Get the SLI4_PARAMS port capabilities. - * @phba: Pointer to HBA context object. - * @mboxq: Pointer to the mailboxq memory for the mailbox command response. - * - * This function is called in the SLI4 code path to read the port's - * sli4 capabilities. - * - * This function may be be called from any context that can block-wait - * for the completion. The expectation is that this routine is called - * typically from probe_one or from the online routine. - **/ -int -lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) -{ - int rc; - struct lpfc_mqe *mqe; - struct lpfc_pc_sli4_params *sli4_params; - uint32_t mbox_tmo; - - rc = 0; - mqe = &mboxq->u.mqe; - - /* Read the port's SLI4 Parameters port capabilities */ - lpfc_pc_sli4_params(mboxq); - if (!phba->sli4_hba.intr_enable) - rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); - else { - mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq); - rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo); - } - - if (unlikely(rc)) - return 1; - - sli4_params = &phba->sli4_hba.pc_sli4_params; - sli4_params->if_type = bf_get(if_type, &mqe->un.sli4_params); - sli4_params->sli_rev = bf_get(sli_rev, &mqe->un.sli4_params); - sli4_params->sli_family = bf_get(sli_family, &mqe->un.sli4_params); - sli4_params->featurelevel_1 = bf_get(featurelevel_1, - &mqe->un.sli4_params); - sli4_params->featurelevel_2 = bf_get(featurelevel_2, - &mqe->un.sli4_params); - sli4_params->proto_types = mqe->un.sli4_params.word3; - sli4_params->sge_supp_len = mqe->un.sli4_params.sge_supp_len; - sli4_params->if_page_sz = bf_get(if_page_sz, &mqe->un.sli4_params); - sli4_params->rq_db_window = bf_get(rq_db_window, &mqe->un.sli4_params); - sli4_params->loopbk_scope = bf_get(loopbk_scope, &mqe->un.sli4_params); - sli4_params->eq_pages_max = bf_get(eq_pages, &mqe->un.sli4_params); - sli4_params->eqe_size = bf_get(eqe_size, &mqe->un.sli4_params); - sli4_params->cq_pages_max = bf_get(cq_pages, &mqe->un.sli4_params); - sli4_params->cqe_size = bf_get(cqe_size, &mqe->un.sli4_params); - sli4_params->mq_pages_max = bf_get(mq_pages, &mqe->un.sli4_params); - sli4_params->mqe_size = bf_get(mqe_size, &mqe->un.sli4_params); - sli4_params->mq_elem_cnt = bf_get(mq_elem_cnt, &mqe->un.sli4_params); - sli4_params->wq_pages_max = bf_get(wq_pages, &mqe->un.sli4_params); - sli4_params->wqe_size = bf_get(wqe_size, &mqe->un.sli4_params); - sli4_params->rq_pages_max = bf_get(rq_pages, &mqe->un.sli4_params); - sli4_params->rqe_size = bf_get(rqe_size, &mqe->un.sli4_params); - sli4_params->hdr_pages_max = bf_get(hdr_pages, &mqe->un.sli4_params); - sli4_params->hdr_size = bf_get(hdr_size, &mqe->un.sli4_params); - sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params); - sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params); - sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params); - - /* Make sure that sge_supp_len can be handled by the driver */ - if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) - sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; - - return rc; -} - /** * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS. * @phba: Pointer to HBA context object. @@ -10647,7 +10547,8 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) else phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED; sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len; - sli4_params->loopbk_scope = bf_get(loopbk_scope, mbx_sli4_parameters); + sli4_params->loopbk_scope = bf_get(cfg_loopbk_scope, + mbx_sli4_parameters); sli4_params->oas_supported = bf_get(cfg_oas, mbx_sli4_parameters); sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters); sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e6bf5e8bc767..a4c382d2ce79 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -2622,39 +2622,3 @@ lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) resume_rpi->event_tag = ndlp->phba->fc_eventTag; } -/** - * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages - * mailbox command. - * @mbox: pointer to lpfc mbox command to initialize. - * - * The PORT_CAPABILITIES supported pages mailbox command is issued to - * retrieve the particular feature pages supported by the port. - **/ -void -lpfc_supported_pages(struct lpfcMboxq *mbox) -{ - struct lpfc_mbx_supp_pages *supp_pages; - - memset(mbox, 0, sizeof(*mbox)); - supp_pages = &mbox->u.mqe.un.supp_pages; - bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); - bf_set(cpn, supp_pages, LPFC_SUPP_PAGES); -} - -/** - * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd. - * @mbox: pointer to lpfc mbox command to initialize. - * - * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to - * retrieve the particular SLI4 features supported by the port. - **/ -void -lpfc_pc_sli4_params(struct lpfcMboxq *mbox) -{ - struct lpfc_mbx_pc_sli4_params *sli4_params; - - memset(mbox, 0, sizeof(*mbox)); - sli4_params = &mbox->u.mqe.un.sli4_params; - bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); - bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS); -} -- 2.30.2
