Instead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling. And use SCSI result accessors while we're at it. Signed-off-by: Hannes Reinecke <hare@xxxxxxx> --- drivers/scsi/arm/acornscsi.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 8b75d896f393..84fc7a0c6ff4 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -794,7 +794,10 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp, acornscsi_dma_cleanup(host); - SCpnt->result = result << 16 | host->scsi.SCp.Message << 8 | host->scsi.SCp.Status; + set_host_byte(SCpnt, result); + if (result == DID_OK) + scsi_msg_to_host_byte(SCpnt, host->scsi.SCp.Message); + set_status_byte(SCpnt, host->scsi.SCp.Status); /* * In theory, this should not happen. In practice, it seems to. @@ -833,12 +836,12 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp, xfer_warn = 0; if (xfer_warn) { - switch (status_byte(SCpnt->result)) { - case CHECK_CONDITION: - case COMMAND_TERMINATED: - case BUSY: - case QUEUE_FULL: - case RESERVATION_CONFLICT: + switch (get_status_byte(SCpnt)) { + case SAM_STAT_CHECK_CONDITION: + case SAM_STAT_COMMAND_TERMINATED: + case SAM_STAT_BUSY: + case SAM_STAT_TASK_SET_FULL: + case SAM_STAT_RESERVATION_CONFLICT: break; default: @@ -2470,7 +2473,7 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt, if (acornscsi_cmdtype(SCpnt->cmnd[0]) == CMD_WRITE && (NO_WRITE & (1 << SCpnt->device->id))) { printk(KERN_CRIT "scsi%d.%c: WRITE attempted with NO_WRITE flag set\n", host->host->host_no, '0' + SCpnt->device->id); - SCpnt->result = DID_NO_CONNECT << 16; + set_host_byte(SCpnt, DID_NO_CONNECT); done(SCpnt); return 0; } @@ -2492,7 +2495,7 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt, unsigned long flags; if (!queue_add_cmd_ordered(&host->queues.issue, SCpnt)) { - SCpnt->result = DID_ERROR << 16; + set_host_byte(SCpnt, DID_ERROR); done(SCpnt); return 0; } -- 2.29.2