Remove last vestigies of SCSI status message bytes.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
Documentation/scsi/scsi_mid_low_api.rst | 6 ++---
include/trace/events/scsi.h | 33 +------------------------
2 files changed, 4 insertions(+), 35 deletions(-)
diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst
index 2c87eaa36296..8728204e2b76 100644
--- a/Documentation/scsi/scsi_mid_low_api.rst
+++ b/Documentation/scsi/scsi_mid_low_api.rst
@@ -1176,9 +1176,9 @@ Members of interest:
of 0 implies a successfully completed command (and all
data (if any) has been transferred to or from the SCSI
target device). 'result' is a 32 bit unsigned integer that
- can be viewed as 4 related bytes. The SCSI status value is
- in the LSB. See include/scsi/scsi.h status_byte(),
- msg_byte() and host_byte() macros and related constants.
+ can be viewed as 2 related bytes. The SCSI status value is
+ in the LSB. See include/scsi/scsi.h status_byte() and
+ host_byte() macros and related constants.
sense_buffer
- an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that
should be written when the SCSI status (LSB of 'result')
diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h
index 428cca71c2ba..370ade0d4093 100644
--- a/include/trace/events/scsi.h
+++ b/include/trace/events/scsi.h
@@ -124,37 +124,6 @@
scsi_hostbyte_name(DID_TRANSPORT_DISRUPTED), \
scsi_hostbyte_name(DID_TRANSPORT_FAILFAST))
-#define scsi_msgbyte_name(result) { result, #result }
-#define show_msgbyte_name(val) \
- __print_symbolic(val, \
- scsi_msgbyte_name(COMMAND_COMPLETE), \
- scsi_msgbyte_name(EXTENDED_MESSAGE), \
- scsi_msgbyte_name(SAVE_POINTERS), \
- scsi_msgbyte_name(RESTORE_POINTERS), \
- scsi_msgbyte_name(DISCONNECT), \
- scsi_msgbyte_name(INITIATOR_ERROR), \
- scsi_msgbyte_name(ABORT_TASK_SET), \
- scsi_msgbyte_name(MESSAGE_REJECT), \
- scsi_msgbyte_name(NOP), \
- scsi_msgbyte_name(MSG_PARITY_ERROR), \
- scsi_msgbyte_name(LINKED_CMD_COMPLETE), \
- scsi_msgbyte_name(LINKED_FLG_CMD_COMPLETE), \
- scsi_msgbyte_name(TARGET_RESET), \
- scsi_msgbyte_name(ABORT_TASK), \
- scsi_msgbyte_name(CLEAR_TASK_SET), \
- scsi_msgbyte_name(INITIATE_RECOVERY), \
- scsi_msgbyte_name(RELEASE_RECOVERY), \
- scsi_msgbyte_name(CLEAR_ACA), \
- scsi_msgbyte_name(LOGICAL_UNIT_RESET), \
- scsi_msgbyte_name(SIMPLE_QUEUE_TAG), \
- scsi_msgbyte_name(HEAD_OF_QUEUE_TAG), \
- scsi_msgbyte_name(ORDERED_QUEUE_TAG), \
- scsi_msgbyte_name(IGNORE_WIDE_RESIDUE), \
- scsi_msgbyte_name(ACA), \
- scsi_msgbyte_name(QAS_REQUEST), \
- scsi_msgbyte_name(BUS_DEVICE_RESET), \
- scsi_msgbyte_name(ABORT))
-
#define scsi_statusbyte_name(result) { result, #result }
#define show_statusbyte_name(val) \
__print_symbolic(val, \
@@ -316,7 +285,7 @@ DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template,
__print_hex(__get_dynamic_array(cmnd), __entry->cmd_len),
"DRIVER_OK",
show_hostbyte_name(((__entry->result) >> 16) & 0xff),
- show_msgbyte_name(((__entry->result) >> 8) & 0xff),
+ "COMMAND_COMPLETE",
show_statusbyte_name(__entry->result & 0xff))
);
--
2.29.2
