From: David Miller <davem@xxxxxxxxxxxxx>
Date: Mon, 16 Apr 2007 12:37:43 -0700 (PDT)
> Now I'm happy to code up the sparc OFW property bits but your attitude
> and perspective on this absolutely has to change and the old fallback
> code still has to go back in there, possible FC ID collisions or not.
Here is the patch I think we should definitely apply to the
driver to fix this bug and restore the fallback functionality.
Tested on SunBlade-1000:
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 98c01cd..3e296ab 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -11,6 +11,11 @@
#include "qla_devtbl.h"
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
+#include <asm/pbm.h>
+#endif
+
/* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
#ifndef EXT_IS_LUN_BIT_SET
#define EXT_IS_LUN_BIT_SET(P,L) \
@@ -88,12 +93,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
- rval = ha->isp_ops.nvram_config(ha);
- if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to verify NVRAM data.\n",
- ha->host_no));
- return rval;
- }
+ ha->isp_ops.nvram_config(ha);
if (ha->flags.disable_serdes) {
/* Mask HBA via NVRAM settings? */
@@ -1393,6 +1393,28 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
}
}
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ struct device_node *dp = pcp->prom_node;
+ u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
/*
* NVRAM configuration for ISP 2xxx
*
@@ -1409,6 +1431,7 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
+ int rval;
uint8_t chksum = 0;
uint16_t cnt;
uint8_t *dptr1, *dptr2;
@@ -1417,6 +1440,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
uint8_t *ptr = (uint8_t *)ha->request_ring;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ rval = QLA_SUCCESS;
+
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
@@ -1440,7 +1465,57 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
nv->nvram_version);
- return QLA_FUNCTION_FAILED;
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->parameter_block_version = ICB_VERSION;
+
+ if (IS_QLA23XX(ha)) {
+ nv->firmware_options[0] = BIT_2 | BIT_1;
+ nv->firmware_options[1] = BIT_7 | BIT_5;
+ nv->add_firmware_options[0] = BIT_5;
+ nv->add_firmware_options[1] = BIT_5 | BIT_4;
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->special_options[1] = BIT_7;
+ } else if (IS_QLA2200(ha)) {
+ nv->firmware_options[0] = BIT_2 | BIT_1;
+ nv->firmware_options[1] = BIT_7 | BIT_5;
+ nv->add_firmware_options[0] = BIT_5;
+ nv->add_firmware_options[1] = BIT_5 | BIT_4;
+ nv->frame_payload_size = __constant_cpu_to_le16(1024);
+ } else if (IS_QLA2100(ha)) {
+ nv->firmware_options[0] = BIT_3 | BIT_1;
+ nv->firmware_options[1] = BIT_5;
+ nv->frame_payload_size = __constant_cpu_to_le16(1024);
+ }
+
+ nv->max_iocb_allocation = __constant_cpu_to_le16(256);
+ nv->execution_throttle = __constant_cpu_to_le16(16);
+ nv->retry_count = 8;
+ nv->retry_delay = 1;
+
+ nv->port_name[0] = 33;
+ nv->port_name[3] = 224;
+ nv->port_name[4] = 139;
+
+ qla2xxx_nvram_wwn_from_ofw(ha, nv);
+
+ nv->login_timeout = 4;
+
+ /*
+ * Set default host adapter parameters
+ */
+ nv->host_p[1] = BIT_2;
+ nv->reset_delay = 5;
+ nv->port_down_retry_count = 8;
+ nv->max_luns_per_target = __constant_cpu_to_le16(8);
+ nv->link_down_timeout = 60;
+
+ rval = 1;
}
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
@@ -1653,7 +1728,11 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
}
}
- return QLA_SUCCESS;
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
}
static void
@@ -3071,9 +3150,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
ha->isp_ops.get_flash_version(ha, ha->request_ring);
- rval = ha->isp_ops.nvram_config(ha);
- if (rval)
- goto isp_abort_retry;
+ ha->isp_ops.nvram_config(ha);
if (!qla2x00_restart_isp(ha)) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3103,7 +3180,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
}
}
} else { /* failed the ISP abort */
-isp_abort_retry:
ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
@@ -3290,9 +3366,32 @@ qla24xx_reset_adapter(scsi_qla_host_t *ha)
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ struct device_node *dp = pcp->prom_node;
+ u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
int
qla24xx_nvram_config(scsi_qla_host_t *ha)
{
+ int rval;
struct init_cb_24xx *icb;
struct nvram_24xx *nv;
uint32_t *dptr;
@@ -3300,6 +3399,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
uint32_t chksum;
uint16_t cnt;
+ rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
nv = (struct nvram_24xx *)ha->request_ring;
@@ -3332,7 +3432,52 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
le16_to_cpu(nv->nvram_version));
- return QLA_FUNCTION_FAILED;
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->hard_address = __constant_cpu_to_le16(124);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ qla24xx_nvram_wwn_from_ofw(ha, nv);
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+ rval = 1;
}
/* Reset Initialization control block */
@@ -3479,7 +3624,11 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
ha->flags.process_response_queue = 1;
}
- return QLA_SUCCESS;
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
}
static int
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
