An explanation of the purpose of this patch is available in the patch
"scsi: Introduce the scsi_status union".
Cc: Adaptec OEM Raid Solutions <aacraid@xxxxxxxxxxxxx>
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
drivers/scsi/dpt_i2o.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index a18a4a08f049..30a8d4817dab 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -430,7 +430,7 @@ static int adpt_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd
*/
if ((cmd->cmnd[0] == REQUEST_SENSE) && (cmd->sense_buffer[0] != 0)) {
- cmd->result = (DID_OK << 16);
+ cmd->status.combined = (DID_OK << 16);
cmd->scsi_done(cmd);
return 0;
}
@@ -455,7 +455,7 @@ static int adpt_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd
if ((pDev = adpt_find_device(pHba, (u32)cmd->device->channel, (u32)cmd->device->id, cmd->device->lun)) == NULL) {
// TODO: if any luns are at this bus, scsi id then fake a TEST_UNIT_READY and INQUIRY response
// with type 7F (for all luns less than the max for this bus,id) so the lun scan will continue.
- cmd->result = (DID_NO_CONNECT << 16);
+ cmd->status.combined = (DID_NO_CONNECT << 16);
cmd->scsi_done(cmd);
return 0;
}
@@ -2226,7 +2226,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
default:
printk(KERN_WARNING"%s: scsi opcode 0x%x not supported.\n",
pHba->name, cmd->cmnd[0]);
- cmd->result = (DID_ERROR <<16);
+ cmd->status.combined = DID_ERROR << 16;
cmd->scsi_done(cmd);
return 0;
}
@@ -2359,15 +2359,15 @@ static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
if(!(reply_flags & MSG_FAIL)) {
switch(detailed_status & I2O_SCSI_DSC_MASK) {
case I2O_SCSI_DSC_SUCCESS:
- cmd->result = (DID_OK << 16);
+ cmd->status.combined = (DID_OK << 16);
// handle underflow
if (readl(reply+20) < cmd->underflow) {
- cmd->result = (DID_ERROR <<16);
+ cmd->status.combined = DID_ERROR << 16;
printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name);
}
break;
case I2O_SCSI_DSC_REQUEST_ABORTED:
- cmd->result = (DID_ABORT << 16);
+ cmd->status.combined = (DID_ABORT << 16);
break;
case I2O_SCSI_DSC_PATH_INVALID:
case I2O_SCSI_DSC_DEVICE_NOT_PRESENT:
@@ -2377,19 +2377,19 @@ static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
case I2O_SCSI_DSC_RESOURCE_UNAVAILABLE:
printk(KERN_WARNING"%s: SCSI Timeout-Device (%d,%d,%llu) hba status=0x%x, dev status=0x%x, cmd=0x%x\n",
pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, cmd->device->lun, hba_status, dev_status, cmd->cmnd[0]);
- cmd->result = (DID_TIME_OUT << 16);
+ cmd->status.combined = (DID_TIME_OUT << 16);
break;
case I2O_SCSI_DSC_ADAPTER_BUSY:
case I2O_SCSI_DSC_BUS_BUSY:
- cmd->result = (DID_BUS_BUSY << 16);
+ cmd->status.combined = (DID_BUS_BUSY << 16);
break;
case I2O_SCSI_DSC_SCSI_BUS_RESET:
case I2O_SCSI_DSC_BDR_MESSAGE_SENT:
- cmd->result = (DID_RESET << 16);
+ cmd->status.combined = (DID_RESET << 16);
break;
case I2O_SCSI_DSC_PARITY_ERROR_FAILURE:
printk(KERN_WARNING"%s: SCSI CMD parity error\n",pHba->name);
- cmd->result = (DID_PARITY << 16);
+ cmd->status.combined = (DID_PARITY << 16);
break;
case I2O_SCSI_DSC_UNABLE_TO_ABORT:
case I2O_SCSI_DSC_COMPLETE_WITH_ERROR:
@@ -2418,7 +2418,7 @@ static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
printk(KERN_WARNING"%s: SCSI error %0x-Device(%d,%d,%llu) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n",
pHba->name, detailed_status & I2O_SCSI_DSC_MASK, (u32)cmd->device->channel, (u32)cmd->device->id, cmd->device->lun,
hba_status, dev_status, cmd->cmnd[0]);
- cmd->result = (DID_ERROR << 16);
+ cmd->status.combined = (DID_ERROR << 16);
break;
}
@@ -2431,7 +2431,7 @@ static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
if(cmd->sense_buffer[0] == 0x70 /* class 7 */ &&
cmd->sense_buffer[2] == DATA_PROTECT ){
/* This is to handle an array failed */
- cmd->result = (DID_TIME_OUT << 16);
+ cmd->status.combined = (DID_TIME_OUT << 16);
printk(KERN_WARNING"%s: SCSI Data Protect-Device (%d,%d,%llu) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n",
pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, cmd->device->lun,
hba_status, dev_status, cmd->cmnd[0]);
@@ -2443,13 +2443,13 @@ static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
* the card rejected it. We should signal a retry
* for a limitted number of retries.
*/
- cmd->result = (DID_TIME_OUT << 16);
+ cmd->status.combined = (DID_TIME_OUT << 16);
printk(KERN_WARNING"%s: I2O MSG_FAIL - Device (%d,%d,%llu) tid=%d, cmd=0x%x\n",
pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, cmd->device->lun,
((struct adpt_device*)(cmd->device->hostdata))->tid, cmd->cmnd[0]);
}
- cmd->result |= (dev_status);
+ cmd->status.combined |= (dev_status);
if(cmd->scsi_done != NULL){
cmd->scsi_done(cmd);
