[PATCH v3 18/24] mpi3mr: add complete support of soft reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unlock the host diagnostic registers and write the specific
reset type to that, wait for reset acknowledgment from the
controller, if the reset is not successful retry for the
predefined number of times

Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx>

Cc: sathya.prakash@xxxxxxxxxxxx
---
 drivers/scsi/mpi3mr/mpi3mr.h    |   3 +
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 245 +++++++++++++++++++++++++++++++-
 2 files changed, 246 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 3ac7b0f119bb..ff3e68a6d0b5 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -189,6 +189,9 @@ enum mpi3mr_reset_reason {
 	MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19,
 	MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20,
 	MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21,
+	MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
+	MPI3MR_RESET_FROM_SYSFS = 23,
+	MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24
 };
 
 /**
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 76e4c87c0426..bb1d2c45e903 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -643,6 +643,100 @@ static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state)
 	return name;
 }
 
+/* Reset reason to name mapper structure*/
+static const struct {
+	enum mpi3mr_reset_reason value;
+	char *name;
+} mpi3mr_reset_reason_codes[] = {
+	{ MPI3MR_RESET_FROM_BRINGUP, "timeout in bringup" },
+	{ MPI3MR_RESET_FROM_FAULT_WATCH, "fault" },
+	{ MPI3MR_RESET_FROM_IOCTL, "application invocation" },
+	{ MPI3MR_RESET_FROM_EH_HOS, "error handling" },
+	{ MPI3MR_RESET_FROM_TM_TIMEOUT, "TM timeout" },
+	{ MPI3MR_RESET_FROM_IOCTL_TIMEOUT, "IOCTL timeout" },
+	{ MPI3MR_RESET_FROM_MUR_FAILURE, "MUR failure" },
+	{ MPI3MR_RESET_FROM_CTLR_CLEANUP, "timeout in controller cleanup" },
+	{ MPI3MR_RESET_FROM_CIACTIV_FAULT, "component image activation fault" },
+	{ MPI3MR_RESET_FROM_PE_TIMEOUT, "port enable timeout" },
+	{ MPI3MR_RESET_FROM_TSU_TIMEOUT, "time stamp update timeout" },
+	{ MPI3MR_RESET_FROM_DELREQQ_TIMEOUT, "delete request queue timeout" },
+	{ MPI3MR_RESET_FROM_DELREPQ_TIMEOUT, "delete reply queue timeout" },
+	{
+		MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT,
+		"create request queue timeout"
+	},
+	{
+		MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT,
+		"create reply queue timeout"
+	},
+	{ MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT, "IOC facts timeout" },
+	{ MPI3MR_RESET_FROM_IOCINIT_TIMEOUT, "IOC init timeout" },
+	{ MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT, "event notify timeout" },
+	{ MPI3MR_RESET_FROM_EVTACK_TIMEOUT, "event acknowledgment timeout" },
+	{
+		MPI3MR_RESET_FROM_CIACTVRST_TIMER,
+		"component image activation timeout"
+	},
+	{
+		MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT,
+		"get package version timeout"
+	},
+	{ MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" },
+	{ MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" },
+};
+
+/**
+ * mpi3mr_reset_rc_name - get reset reason code name
+ * @reason_code: reset reason code value
+ *
+ * Map reset reason to an NULL terminated ASCII string
+ *
+ * Return: Name corresponding to reset reason value or NULL.
+ */
+static const char *mpi3mr_reset_rc_name(enum mpi3mr_reset_reason reason_code)
+{
+	int i;
+	char *name = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_reason_codes); i++) {
+		if (mpi3mr_reset_reason_codes[i].value == reason_code) {
+			name = mpi3mr_reset_reason_codes[i].name;
+			break;
+		}
+	}
+	return name;
+}
+
+/* Reset type to name mapper structure*/
+static const struct {
+	u16 reset_type;
+	char *name;
+} mpi3mr_reset_types[] = {
+	{ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, "soft" },
+	{ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, "diag fault" },
+};
+
+/**
+ * mpi3mr_reset_type_name - get reset type name
+ * @reset_type: reset type value
+ *
+ * Map reset type to an NULL terminated ASCII string
+ *
+ * Return: Name corresponding to reset type value or NULL.
+ */
+static const char *mpi3mr_reset_type_name(u16 reset_type)
+{
+	int i;
+	char *name = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_types); i++) {
+		if (mpi3mr_reset_types[i].reset_type == reset_type) {
+			name = mpi3mr_reset_types[i].name;
+			break;
+		}
+	}
+	return name;
+}
 
 /**
  * mpi3mr_print_fault_info - Display fault information
@@ -806,6 +900,48 @@ static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 	return -1;
 }
 
+/**
+ * mpi3mr_soft_reset_success - Check softreset is success or not
+ * @ioc_status: IOC status register value
+ * @ioc_config: IOC config register value
+ *
+ * Check whether the soft reset is successful or not based on
+ * IOC status and IOC config register values.
+ *
+ * Return: True when the soft reset is success, false otherwise.
+ */
+static inline bool
+mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config)
+{
+	if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
+	    (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
+	    (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC)))
+		return true;
+	return false;
+}
+
+/**
+ * mpi3mr_diagfault_success - Check diag fault is success or not
+ * @mrioc: Adapter reference
+ * @ioc_status: IOC status register value
+ *
+ * Check whether the controller hit diag reset fault code.
+ *
+ * Return: True when there is diag fault, false otherwise.
+ */
+static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc,
+	u32 ioc_status)
+{
+	u32 fault;
+
+	if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT))
+		return false;
+	fault = readl(&mrioc->sysif_regs->Fault) & MPI3_SYSIF_FAULT_CODE_MASK;
+	if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET)
+		return true;
+	return false;
+}
+
 /**
  * mpi3mr_set_diagsave - Set diag save bit for snapdump
  * @mrioc: Adapter reference
@@ -830,14 +966,117 @@ static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc)
  * @reset_type: Reset type
  * @reset_reason: Reset reason code
  *
- * TBD
+ * Unlock the host diagnostic registers and write the specific
+ * reset type to that, wait for reset acknowledgment from the
+ * controller, if the reset is not successful retry for the
+ * predefined number of times.
  *
  * Return: 0 on success, non-zero on failure.
  */
 static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type,
 	u32 reset_reason)
 {
-	return 0;
+	int retval = -1;
+	u8 unlock_retry_count, reset_retry_count = 0;
+	u32 host_diagnostic, timeout, ioc_status, ioc_config;
+
+	pci_cfg_access_lock(mrioc->pdev);
+	if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) &&
+	    (reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT))
+		goto out;
+	if (mrioc->unrecoverable)
+		goto out;
+retry_reset:
+	unlock_retry_count = 0;
+	mpi3mr_clear_reset_history(mrioc);
+	do {
+		ioc_info(mrioc,
+		    "Write magic sequence to unlock host diag register (retry=%d)\n",
+		    ++unlock_retry_count);
+		if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) {
+			writel(reset_reason, &mrioc->sysif_regs->Scratchpad[0]);
+			mrioc->unrecoverable = 1;
+			goto out;
+		}
+
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH,
+		    &mrioc->sysif_regs->WriteSequence);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH,
+		    &mrioc->sysif_regs->WriteSequence);
+		usleep_range(1000, 1100);
+		host_diagnostic = readl(&mrioc->sysif_regs->HostDiagnostic);
+		ioc_info(mrioc,
+		    "wrote magic sequence: retry_count(%d), host_diagnostic(0x%08x)\n",
+		    unlock_retry_count, host_diagnostic);
+	} while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE));
+
+	writel(reset_reason, &mrioc->sysif_regs->Scratchpad[0]);
+	ioc_info(mrioc, "%s reset due to %s(0x%x)\n",
+	    mpi3mr_reset_type_name(reset_type),
+	    mpi3mr_reset_rc_name(reset_reason), reset_reason);
+	writel(host_diagnostic | reset_type,
+	    &mrioc->sysif_regs->HostDiagnostic);
+	timeout = mrioc->ready_timeout * 10;
+	if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) {
+		do {
+			ioc_status = readl(&mrioc->sysif_regs->IOCStatus);
+			if (ioc_status &
+			    MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) {
+				mpi3mr_clear_reset_history(mrioc);
+				ioc_config =
+				    readl(&mrioc->sysif_regs->IOCConfiguration);
+				if (mpi3mr_soft_reset_success(ioc_status,
+				    ioc_config)) {
+					retval = 0;
+					break;
+				}
+			}
+			msleep(100);
+		} while (--timeout);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+		    &mrioc->sysif_regs->WriteSequence);
+	} else if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT) {
+		do {
+			ioc_status = readl(&mrioc->sysif_regs->IOCStatus);
+			if (mpi3mr_diagfault_success(mrioc, ioc_status)) {
+				retval = 0;
+				break;
+			}
+			msleep(100);
+		} while (--timeout);
+		mpi3mr_clear_reset_history(mrioc);
+		writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+		    &mrioc->sysif_regs->WriteSequence);
+	}
+	if (retval && ((++reset_retry_count) < MPI3MR_MAX_RESET_RETRY_COUNT)) {
+		ioc_status = readl(&mrioc->sysif_regs->IOCStatus);
+		ioc_config = readl(&mrioc->sysif_regs->IOCConfiguration);
+		ioc_info(mrioc,
+		    "Base IOC Sts/Config after reset try %d is (0x%x)/(0x%x)\n",
+		    reset_retry_count, ioc_status, ioc_config);
+		goto retry_reset;
+	}
+
+out:
+	pci_cfg_access_unlock(mrioc->pdev);
+	ioc_status = readl(&mrioc->sysif_regs->IOCStatus);
+	ioc_config = readl(&mrioc->sysif_regs->IOCConfiguration);
+
+	ioc_info(mrioc,
+	    "Base IOC Sts/Config after %s reset is (0x%x)/(0x%x)\n",
+	    (!retval)?"successful":"failed", ioc_status,
+	    ioc_config);
+	return retval;
 }
 
 /**
@@ -3462,6 +3701,8 @@ int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
 {
 	int retval = 0;
 
+	ioc_info(mrioc, "Entry: reason code: %s\n",
+	    mpi3mr_reset_rc_name(reset_reason));
 	mrioc->reset_in_progress = 1;
 
 	mpi3mr_ioc_disable_intr(mrioc);
-- 
2.18.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux