Re: [PATCH v18 1/2] scsi: ufs: Enable power management for wlun

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/14/21 11:58 AM, Asutosh Das wrote:
> [ ... ]

Patches sent to the SCSI mailing list should not have a "scsi: " prefix
in the subject. That prefix is inserted before any SCSI patches go into
Martin's tree.

> diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
> index 13d9204..b9105e4 100644
> --- a/drivers/scsi/ufs/cdns-pltfrm.c
> +++ b/drivers/scsi/ufs/cdns-pltfrm.c
> @@ -323,6 +323,8 @@ static const struct dev_pm_ops cdns_ufs_dev_pm_ops = {
>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
> +	.prepare	 = ufshcd_suspend_prepare,
> +	.complete	= ufshcd_resume_complete,
>  };
>  
>  static struct platform_driver cdns_ufs_pltfrm_driver = {
> diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
> index 67a6a61..b01db12 100644
> --- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
> +++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
> @@ -148,6 +148,8 @@ static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
>  	.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
>  	.runtime_resume  = tc_dwc_g210_pci_runtime_resume,
>  	.runtime_idle    = tc_dwc_g210_pci_runtime_idle,
> +	.prepare	 = ufshcd_suspend_prepare,
> +	.complete	= ufshcd_resume_complete,
>  };

[ ... ]

> --- a/drivers/scsi/ufs/ufs-exynos.c
> +++ b/drivers/scsi/ufs/ufs-exynos.c
> @@ -1267,6 +1267,8 @@ static const struct dev_pm_ops exynos_ufs_pm_ops = {
>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
> +	.prepare	 = ufshcd_suspend_prepare,
> +	.complete	= ufshcd_resume_complete,
>  };
>  
>  static struct platform_driver exynos_ufs_pltform = {
> diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
> index 0aa5813..d463b44 100644
> --- a/drivers/scsi/ufs/ufs-hisi.c
> +++ b/drivers/scsi/ufs/ufs-hisi.c
> @@ -574,6 +574,8 @@ static const struct dev_pm_ops ufs_hisi_pm_ops = {
>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
> +	.prepare	 = ufshcd_suspend_prepare,
> +	.complete	= ufshcd_resume_complete,
>  };

A minor comment about source code formatting: please make sure that the
equality signs are aligned in struct dev_pm_ops definitions.

> +static inline bool is_rpmb_wlun(struct scsi_device *sdev)
> +{
> +	return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
> +}
> +
> +static inline bool is_device_wlun(struct scsi_device *sdev)
> +{
> +	return (sdev->lun ==
> +		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
> +}

The Linux kernel coding style requires not to surround expressions with
parentheses in return statements.

>  /**
> + * ufshcd_setup_links - associate link b/w device wlun and other luns
> + * @sdev: pointer to SCSI device
> + * @hba: pointer to ufs hba
> + */
> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
> +{
> +	struct device_link *link;
> +
> +	/*
> +	 * device wlun is the supplier & rest of the luns are consumers
> +	 * This ensures that device wlun suspends after all other luns.
> +	 */
> +	if (hba->sdev_ufs_device) {
> +		link = device_link_add(&sdev->sdev_gendev,
> +				       &hba->sdev_ufs_device->sdev_gendev,
> +				       DL_FLAG_PM_RUNTIME|DL_FLAG_RPM_ACTIVE);
> +		if (!link) {
> +			dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
> +				dev_name(&hba->sdev_ufs_device->sdev_gendev));
> +			return;
> +		}
> +		hba->luns_avail--;
> +		/* Ignore REPORT_LUN wlun probing */
> +		if (hba->luns_avail == 1) {
> +			ufshcd_rpm_put(hba);
> +			return;
> +		}
> +	} else {
> +		/* device wlun is probed */
> +		hba->luns_avail--;
> +	}
> +}

Please add a comment that explains that it is assumed that the WLUNs are
scanned before the other LUNs.

> @@ -4862,8 +4913,13 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
>  	blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
>  	if (hba->quirks & UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE)
>  		blk_queue_update_dma_alignment(q, PAGE_SIZE - 1);
> -
> -	if (ufshcd_is_rpm_autosuspend_allowed(hba))
> +	/*
> +	 * Block runtime-pm until all consumers are added.
> +	 * Refer ufshcd_setup_links().
> +	 */
> +	if (is_device_wlun(sdev))
> +		pm_runtime_get_noresume(&sdev->sdev_gendev);
> +	else if (ufshcd_is_rpm_autosuspend_allowed(hba))
>  		sdev->rpm_autosuspend = 1;
>  
>  	ufshcd_crypto_setup_rq_keyslot_manager(hba, q);

The following code is executed before ufshcd_async_scan() is called:

	dev = hba->dev;
	[ ... ]
	/* Hold auto suspend until async scan completes */
	pm_runtime_get_sync(dev);

and the following code occurs in ufshcd_add_lus():

	pm_runtime_put_sync(hba->dev);

Isn't that sufficient to postpone enabling of runtime PM until LUN
scanning has finished? Or in other words, is adding a
pm_runtime_get_noresume() call in ufshcd_slave_configure() really necessary?

> @@ -4979,15 +5035,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>  			 */
>  			if (!hba->pm_op_in_progress &&
>  			    !ufshcd_eh_in_progress(hba) &&
> -			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
> -			    schedule_work(&hba->eeh_work)) {
> -				/*
> -				 * Prevent suspend once eeh_work is scheduled
> -				 * to avoid deadlock between ufshcd_suspend
> -				 * and exception event handler.
> -				 */
> -				pm_runtime_get_noresume(hba->dev);
> -			}
> +			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
> +				/* Flushed in suspend */
> +				schedule_work(&hba->eeh_work);

What makes it safe to leave out the above pm_runtime_get_noresume() call?

Thanks,

Bart.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux