Hi Kashyap,
Hannes and Bart have commented on the V1 of this set I think they should
have been cc-ed, fixing that now. Their objections are still valid.
Tomas
On 4/7/21 4:04 AM, Kashyap Desai wrote:
> This adds the Kconfig and mpi30 headers.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
> Cc: sathya.prakash@xxxxxxxxxxxx
> ---
> drivers/scsi/Kconfig | 1 +
> drivers/scsi/Makefile | 1 +
> drivers/scsi/mpi3mr/Kconfig | 7 +
> drivers/scsi/mpi3mr/mpi/mpi30_api.h | 21 +
> drivers/scsi/mpi3mr/mpi/mpi30_image.h | 285 +++++
> drivers/scsi/mpi3mr/mpi/mpi30_init.h | 216 ++++
> drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1423 +++++++++++++++++++++
> drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 675 ++++++++++
> drivers/scsi/mpi3mr/mpi/mpi30_type.h | 47 +
> 9 files changed, 2676 insertions(+)
> create mode 100644 drivers/scsi/mpi3mr/Kconfig
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_type.h
>
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index 06b87c7f6bab..1f06811740a7 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -482,6 +482,7 @@ config SCSI_ARCMSR
> source "drivers/scsi/esas2r/Kconfig"
> source "drivers/scsi/megaraid/Kconfig.megaraid"
> source "drivers/scsi/mpt3sas/Kconfig"
> +source "drivers/scsi/mpi3mr/Kconfig"
> source "drivers/scsi/smartpqi/Kconfig"
> source "drivers/scsi/ufs/Kconfig"
>
> diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
> index bc3882f5cc69..06f2d5fab899 100644
> --- a/drivers/scsi/Makefile
> +++ b/drivers/scsi/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
> obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
> obj-$(CONFIG_MEGARAID_SAS) += megaraid/
> obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
> +obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/
> obj-$(CONFIG_SCSI_UFSHCD) += ufs/
> obj-$(CONFIG_SCSI_ACARD) += atp870u.o
> obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
> diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig
> new file mode 100644
> index 000000000000..2d0568dd176a
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/Kconfig
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +config SCSI_MPI3MR
> + tristate "Broadcom MPI3 Storage Controller Device Driver"
> + depends on PCI && SCSI
> + help
> + This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers.
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> new file mode 100644
> index 000000000000..46dd30ccb5f9
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2019-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_api.h
> + * Description: Root header that include all other MPI 3.0 headers
> + * Developers need to only include this header to gain
> + * access to the full MPI3.0 API definitions.
> + * Creation Date: 04/15/2019
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_API_H
> +#define MPI30_API_H 1
> +
> +#include "mpi30_type.h"
> +#include "mpi30_transport.h"
> +#include "mpi30_image.h"
> +#include "mpi30_init.h"
> +#include "mpi30_ioc.h"
> +
> +#endif /* MPI30_API_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
> new file mode 100644
> index 000000000000..430662d3a43b
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
> @@ -0,0 +1,285 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2018-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_image.h
> + * Description: Contains definitions for firmware and other component images.
> + * Creation Date: 04/02/2018
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_IMAGE_H
> +#define MPI30_IMAGE_H 1
> +
> +/* Component Image Version */
> +typedef struct _MPI3_COMP_IMAGE_VERSION {
> + U16 BuildNum; /* 0x00 */
> + U16 CustomerID; /* 0x02 */
> + U8 PhaseMinor; /* 0x04 */
> + U8 PhaseMajor; /* 0x05 */
> + U8 GenMinor; /* 0x06 */
> + U8 GenMajor; /* 0x07 */
> +} MPI3_COMP_IMAGE_VERSION, MPI3_POINTER PTR_MPI3_COMP_IMAGE_VERSION,
> + Mpi3CompImageVersion, MPI3_POINTER pMpi3CompImageVersion;
> +
> +/* Hash Exclusion Format */
> +typedef struct _MPI3_HASH_EXCLUSION_FORMAT {
> + U32 Offset; /* 0x00 */
> + U32 Size; /* 0x04 */
> +} MPI3_HASH_EXCLUSION_FORMAT, MPI3_POINTER PTR_MPI3_HASH_EXCLUSION_FORMAT,
> +Mpi3HashSxclusionFormat_t, MPI3_POINTER pMpi3HashExclusionFormat_t;
> +
> +#define MPI3_IMAGE_HASH_EXCUSION_NUM (4)
> +
> +/* FW Image Header */
> +typedef struct _MPI3_COMPONENT_IMAGE_HEADER {
> + U32 Signature0; /* 0x00 */
> + U32 LoadAddress; /* 0x04 */
> + U32 DataSize; /* 0x08 */
> + U32 StartOffset; /* 0x0C */
> + U32 Signature1; /* 0x10 */
> + U32 FlashOffset; /* 0x14 */
> + U32 ImageSize; /* 0x18 */
> + U32 VersionStringOffset; /* 0x1C */
> + U32 BuildDateStringOffset; /* 0x20 */
> + U32 BuildTimeStringOffset; /* 0x24 */
> + U32 EnvironmentVariableOffset; /* 0x28 */
> + U32 ApplicationSpecific; /* 0x2C */
> + U32 Signature2; /* 0x30 */
> + U32 HeaderSize; /* 0x34 */
> + U32 Crc; /* 0x38 */
> + U32 Flags; /* 0x3C */
> + U32 SecondaryFlashOffset; /* 0x40 */
> + U32 ETPOffset; /* 0x44 */
> + U32 ETPSize; /* 0x48 */
> + MPI3_VERSION_UNION RMCInterfaceVersion; /* 0x4C */
> + MPI3_VERSION_UNION ETPInterfaceVersion; /* 0x50 */
> + MPI3_COMP_IMAGE_VERSION ComponentImageVersion; /* 0x54 */
> + MPI3_HASH_EXCLUSION_FORMAT HashExclusion[MPI3_IMAGE_HASH_EXCUSION_NUM]; /* 0x5C */
> + U32 NextImageHeaderOffset; /* 0x7C */
> + MPI3_VERSION_UNION SecurityVersion; /* 0x80 */
> + U32 Reserved84[31]; /* 0x84 -- 0xFC */
> +} MPI3_COMPONENT_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_COMPONENT_IMAGE_HEADER,
> + Mpi3ComponentImageHeader_t, MPI3_POINTER pMpi3ComponentImageHeader_t;
> +
> +
> +/**** Definitions for Signature0 field ****/
> +#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xEB00003E)
> +
> +/**** Definitions for LoadAddress field ****/
> +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000)
> +
> +/**** Definitions for Signature1 field ****/
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041) /* string "APP " */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434D46) /* string "FMC " */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342) /* string "BSP " */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534F4942) /* string "BIOS" */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4D494948) /* string "HIIM" */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948) /* string "HIIA" */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043) /* string "CPLD" */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053) /* string "SPD " */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147) /* string "GAS " */
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504C4250) /* string "PBLP" */
> +
> +/**** Definitions for Signature2 field ****/
> +#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
> +
> +/**** Definitions for Flags field ****/
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030)
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000)
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010)
> +#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008)
> +#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004)
> +#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002)
> +#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001)
> +
> +
> +/**** Offsets for Image Header Fields ****/
> +#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00)
> +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04)
> +#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08)
> +#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0C)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10)
> +#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14)
> +#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18)
> +#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1C)
> +#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20)
> +#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24)
> +#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28)
> +#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2C)
> +#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30)
> +#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34)
> +#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38)
> +#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3C)
> +#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40)
> +#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44)
> +#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48)
> +#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4C)
> +#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50)
> +#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54)
> +#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5C)
> +#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7C)
> +
> +
> +#define MPI3_IMAGE_HEADER_SIZE (0x100)
> +
> +
> +/* Extended Image Header */
> +typedef struct _MPI3_EXTENDED_IMAGE_HEADER {
> + U8 ImageType; /* 0x00 */
> + U8 Reserved01[3]; /* 0x01 */
> + U32 Checksum; /* 0x04 */
> + U32 ImageSize; /* 0x08 */
> + U32 NextImageHeaderOffset; /* 0x0C */
> + U32 Reserved10[4]; /* 0x10 */
> + U32 IdentifyString[8]; /* 0x20 */
> +} MPI3_EXTENDED_IMAGE_HEADER, MPI3_POINTER PTR_MPI3_EXTENDED_IMAGE_HEADER,
> + Mpi3ExtendedImageHeader_t, MPI3_POINTER pMpi3ExtendedImageHeader_t;
> +
> +/* useful offsets */
> +#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
> +#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
> +#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
> +
> +#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40)
> +
> +/* defines for the ImageType field */
> +#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
> +#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03)
> +#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
> +#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
> +#define MPI3_EXT_IMAGE_TYPE_RDE (0x0A)
> +#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0B)
> +#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
> +#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
> +
> +
> +/* Supported Device Data Format */
> +typedef struct _MPI3_SUPPORTED_DEVICE {
> + U16 DeviceID; /* 0x00 */
> + U16 VendorID; /* 0x02 */
> + U16 DeviceIDMask; /* 0x04 */
> + U16 Reserved06; /* 0x06 */
> + U8 LowPCIRev; /* 0x08 */
> + U8 HighPCIRev; /* 0x09 */
> + U16 Reserved0A; /* 0x0A */
> + U32 Reserved0C; /* 0x0C */
> +} MPI3_SUPPORTED_DEVICE, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICE,
> + Mpi3SupportedDevice_t, MPI3_POINTER pMpi3SupportedDevice_t;
> +
> +#ifndef MPI3_SUPPORTED_DEVICE_MAX
> +#define MPI3_SUPPORTED_DEVICE_MAX (1)
> +#endif /* MPI3_SUPPORTED_DEVICE_MAX */
> +
> +/* Supported Devices Extended Image Data */
> +typedef struct _MPI3_SUPPORTED_DEVICES_DATA {
> + U8 ImageVersion; /* 0x00 */
> + U8 Reserved01; /* 0x01 */
> + U8 NumDevices; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U32 Reserved04; /* 0x04 */
> + MPI3_SUPPORTED_DEVICE SupportedDevice[MPI3_SUPPORTED_DEVICE_MAX]; /* 0x08 */ /* variable length */
> +} MPI3_SUPPORTED_DEVICES_DATA, MPI3_POINTER PTR_MPI3_SUPPORTED_DEVICES_DATA,
> + Mpi3SupportedDevicesData_t, MPI3_POINTER pMpi3SupportedDevicesData_t;
> +
> +#ifndef MPI3_ENCRYPTED_HASH_MAX
> +#define MPI3_ENCRYPTED_HASH_MAX (1)
> +#endif /* MPI3_ENCRYPTED_HASH_MAX */
> +
> +/* Encrypted Hash Entry Format */
> +typedef struct _MPI3_ENCRYPTED_HASH_ENTRY {
> + U8 HashImageType; /* 0x00 */
> + U8 HashAlgorithm; /* 0x01 */
> + U8 EncryptionAlgorithm; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U32 Reserved04; /* 0x04 */
> + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x08 */ /* variable length */
> +} MPI3_ENCRYPTED_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_ENTRY,
> + Mpi3EncryptedHashEntry_t, MPI3_POINTER pMpi3EncryptedHashEntry_t;
> +
> +
> +/* defines for the HashImageType field */
> +#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03)
> +
> +/* defines for the HashAlgorithm field */
> +#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xE0)
> +#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00)
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20) /* Obsolete */
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40)
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60)
> +
> +#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1F)
> +#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00)
> +#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01)
> +#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02)
> +
> +/* defines for the EncryptionAlgorithm field */
> +#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01) /* Obsolete */
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02) /* Obsolete */
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03) /* Obsolete */
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06)
> +
> +
> +#ifndef MPI3_PUBLIC_KEY_MAX
> +#define MPI3_PUBLIC_KEY_MAX (1)
> +#endif /* MPI3_PUBLIC_KEY_MAX */
> +
> +/* Encrypted Key with Hash Entry Format */
> +typedef struct _MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY {
> + U8 HashImageType; /* 0x00 */
> + U8 HashAlgorithm; /* 0x01 */
> + U8 EncryptionAlgorithm; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U32 Reserved04; /* 0x04 */
> + U32 PublicKey[MPI3_PUBLIC_KEY_MAX]; /* 0x08 */ /* variable length */
> + U32 EncryptedHash[MPI3_ENCRYPTED_HASH_MAX]; /* 0x0C */ /* variable length */
> +} MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY, MPI3_POINTER PTR_MPI3_ENCRYPTED_KEY_WITH_HASH_ENTRY,
> + Mpi3EncryptedKeyWithHashEntry_t, MPI3_POINTER pMpi3EncryptedKeyWithHashEntry_t;
> +
> +#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
> +#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1)
> +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */
> +
> +/* Encrypted Hash Image Data */
> +typedef struct _MPI3_ENCRYPTED_HASH_DATA {
> + U8 ImageVersion; /* 0x00 */
> + U8 NumHash; /* 0x01 */
> + U16 Reserved02; /* 0x02 */
> + U32 Reserved04; /* 0x04 */
> + MPI3_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[MPI3_ENCRYPTED_HASH_ENTRY_MAX]; /* 0x08 */ /* variable length */
> +} MPI3_ENCRYPTED_HASH_DATA, MPI3_POINTER PTR_MPI3_ENCRYPTED_HASH_DATA,
> + Mpi3EncryptedHashData_t, MPI3_POINTER pMpi3EncryptedHashData_t;
> +
> +
> +#ifndef MPI3_AUX_PROC_DATA_MAX
> +#define MPI3_AUX_PROC_DATA_MAX (1)
> +#endif /* MPI3_ENCRYPTED_HASH_ENTRY_MAX */
> +
> +/* Auxiliary Processor Extended Image Data */
> +typedef struct _MPI3_AUX_PROCESSOR_DATA {
> + U8 BootMethod; /* 0x00 */
> + U8 NumLoadAddr; /* 0x01 */
> + U8 Reserved02; /* 0x02 */
> + U8 Type; /* 0x03 */
> + U32 Version; /* 0x04 */
> + U32 LoadAddress[8]; /* 0x08 */
> + U32 Reserved28[22]; /* 0x28 */
> + U32 AuxProcessorData[MPI3_AUX_PROC_DATA_MAX]; /* 0x80 */ /* variable length */
> +} MPI3_AUX_PROCESSOR_DATA, MPI3_POINTER PTR_MPI3_AUX_PROCESSOR_DATA,
> + Mpi3AuxProcessorData_t, MPI3_POINTER pMpi3AuxProcessorData_t;
> +
> +#define MPI3_AUX_PROC_DATA_OFFSET (0x80)
> +
> +/* defines for the BootMethod field */
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00)
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01)
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02)
> +
> +/* defines for the Type field */
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00)
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01)
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02)
> +
> +#endif /* MPI30_IMAGE_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
> new file mode 100644
> index 000000000000..a0222f0fc9a8
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
> @@ -0,0 +1,216 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_init.h
> + * Description: Contains definitions for SCSI initiator mode messages and structures.
> + * Creation Date: 10/27/2016
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_INIT_H
> +#define MPI30_INIT_H 1
> +
> +/*****************************************************************************
> + * SCSI Initiator Messages *
> + ****************************************************************************/
> +
> +/*****************************************************************************
> + * SCSI IO Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_SCSI_IO_CDB_EEDP32 {
> + U8 CDB[20]; /* 0x00 */
> + __be32 PrimaryReferenceTag; /* 0x14 */
> + U16 PrimaryApplicationTag; /* 0x18 */
> + U16 PrimaryApplicationTagMask; /* 0x1A */
> + U32 TransferLength; /* 0x1C */
> +} MPI3_SCSI_IO_CDB_EEDP32, MPI3_POINTER PTR_MPI3_SCSI_IO_CDB_EEDP32,
> + Mpi3ScsiIoCdbEedp32_t, MPI3_POINTER pMpi3ScsiIoCdbEedp32_t;
> +
> +typedef union _MPI3_SCSO_IO_CDB_UNION {
> + U8 CDB32[32];
> + MPI3_SCSI_IO_CDB_EEDP32 EEDP32;
> + MPI3_SGE_SIMPLE SGE;
> +} MPI3_SCSO_IO_CDB_UNION, MPI3_POINTER PTR_MPI3_SCSO_IO_CDB_UNION,
> + Mpi3ScsiIoCdb_t, MPI3_POINTER pMpi3ScsiIoCdb_t;
> +
> +typedef struct _MPI3_SCSI_IO_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 DevHandle; /* 0x0A */
> + U32 Flags; /* 0x0C */
> + U32 SkipCount; /* 0x10 */
> + U32 DataLength; /* 0x14 */
> + U8 LUN[8]; /* 0x18 */
> + MPI3_SCSO_IO_CDB_UNION CDB; /* 0x20 */
> + MPI3_SGE_UNION SGL[4]; /* 0x40 */
> +} MPI3_SCSI_IO_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_IO_REQUEST,
> + Mpi3SCSIIORequest_t, MPI3_POINTER pMpi3SCSIIORequest_t;
> +
> +/**** Defines for the MsgFlags field ****/
> +#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80)
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000)
> +#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00F00000)
> +#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000C0000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000)
> +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000)
> +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000)
> +
> +/**** Defines for the SGL field ****/
> +#define MPI3_SCSIIO_METASGL_INDEX (3)
> +
> +/*****************************************************************************
> + * SCSI IO Error Reply Message *
> + ****************************************************************************/
> +typedef struct _MPI3_SCSI_IO_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U8 SCSIStatus; /* 0x10 */
> + U8 SCSIState; /* 0x11 */
> + U16 DevHandle; /* 0x12 */
> + U32 TransferCount; /* 0x14 */
> + U32 SenseCount; /* 0x18 */
> + U32 ResponseData; /* 0x1C */
> + U16 TaskTag; /* 0x20 */
> + U16 SCSIStatusQualifier; /* 0x22 */
> + U32 EEDPErrorOffset; /* 0x24 */
> + U16 EEDPObservedAppTag; /* 0x28 */
> + U16 EEDPObservedGuard; /* 0x2A */
> + U32 EEDPObservedRefTag; /* 0x2C */
> + U64 SenseDataBufferAddress; /* 0x30 */
> +} MPI3_SCSI_IO_REPLY, MPI3_POINTER PTR_MPI3_SCSI_IO_REPLY,
> + Mpi3SCSIIOReply_t, MPI3_POINTER pMpi3SCSIIOReply_t;
> +
> +/**** Defines for the MsgFlags field ****/
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02)
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04)
> +
> +/**** Defines for the SCSIStatus field ****/
> +#define MPI3_SCSI_STATUS_GOOD (0x00)
> +#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02)
> +#define MPI3_SCSI_STATUS_CONDITION_MET (0x04)
> +#define MPI3_SCSI_STATUS_BUSY (0x08)
> +#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10)
> +#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
> +#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
> +#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22)
> +#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28)
> +#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30)
> +#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40)
> +
> +/**** Defines for the SCSIState field ****/
> +#define MPI3_SCSI_STATE_SENSE_MASK (0x03)
> +#define MPI3_SCSI_STATE_SENSE_VALID (0x00)
> +#define MPI3_SCSI_STATE_SENSE_FAILED (0x01)
> +#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02)
> +#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03)
> +#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04)
> +#define MPI3_SCSI_STATE_TERMINATED (0x08)
> +#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10)
> +
> +/**** Defines for the ResponseData field ****/
> +#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000FF)
> +#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0)
> +#define MPI3_SCSI_RSP_ARI2_MASK (0x0000FF00)
> +#define MPI3_SCSI_RSP_ARI2_SHIFT (8)
> +#define MPI3_SCSI_RSP_ARI1_MASK (0x00FF0000)
> +#define MPI3_SCSI_RSP_ARI1_SHIFT (16)
> +#define MPI3_SCSI_RSP_ARI0_MASK (0xFF000000)
> +#define MPI3_SCSI_RSP_ARI0_SHIFT (24)
> +
> +/**** Defines for the TaskTag field ****/
> +#define MPI3_SCSI_TASKTAG_UNKNOWN (0xFFFF)
> +
> +
> +/*****************************************************************************
> + * SCSI Task Management Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_SCSI_TASK_MGMT_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 DevHandle; /* 0x0A */
> + U16 TaskHostTag; /* 0x0C */
> + U8 TaskType; /* 0x0E */
> + U8 Reserved0F; /* 0x0F */
> + U16 TaskRequestQueueID; /* 0x10 */
> + U16 Reserved12; /* 0x12 */
> + U32 Reserved14; /* 0x14 */
> + U8 LUN[8]; /* 0x18 */
> +} MPI3_SCSI_TASK_MGMT_REQUEST, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REQUEST,
> + Mpi3SCSITaskMgmtRequest_t, MPI3_POINTER pMpi3SCSITaskMgmtRequest_t;
> +
> +/**** Defines for the MsgFlags field ****/
> +#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08)
> +
> +/**** Defines for the TaskType field ****/
> +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0A)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0B)
> +
> +
> +/*****************************************************************************
> + * SCSI Task Management Reply Message *
> + ****************************************************************************/
> +typedef struct _MPI3_SCSI_TASK_MGMT_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U32 TerminationCount; /* 0x10 */
> + U32 ResponseData; /* 0x14 */
> + U32 Reserved18; /* 0x18 */
> +} MPI3_SCSI_TASK_MGMT_REPLY, MPI3_POINTER PTR_MPI3_SCSI_TASK_MGMT_REPLY,
> + Mpi3SCSITaskMgmtReply_t, MPI3_POINTER pMpi3SCSITaskMgmtReply_t;
> +
> +/**** Defines for the ResponseData field - use MPI3_SCSI_RSP_ defines ****/
> +/*
> + * Values for the ResponseCode (byte 0 of ResponseData) is normally obtained
> + * from the SSP Response frame. A value of 0x80 may be returned by the IOC
> + * for a TaskType of Query Task indicating the specified TaskHostTag I/O is
> + * currently queued on the IOC and has not been sent to the target device yet.
> + */
> +#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80)
> +
> +#endif /* MPI30_INIT_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> new file mode 100644
> index 000000000000..880d717000f6
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> @@ -0,0 +1,1423 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_ioc.h
> + * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable,
> + * Events, FW Download, and FW Upload.
> + * Creation Date: 10/24/2016
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_IOC_H
> +#define MPI30_IOC_H 1
> +
> +/*****************************************************************************
> + * IOC Messages *
> + ****************************************************************************/
> +
> +/*****************************************************************************
> + * IOCInit Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_IOC_INIT_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + MPI3_VERSION_UNION MPIVersion; /* 0x0C */
> + U64 TimeStamp; /* 0x10 */
> + U8 Reserved18; /* 0x18 */
> + U8 WhoInit; /* 0x19 */
> + U16 Reserved1A; /* 0x1A */
> + U16 ReplyFreeQueueDepth; /* 0x1C */
> + U16 Reserved1E; /* 0x1E */
> + U64 ReplyFreeQueueAddress; /* 0x20 */
> + U32 Reserved28; /* 0x28 */
> + U16 SenseBufferFreeQueueDepth; /* 0x2C */
> + U16 SenseBufferLength; /* 0x2E */
> + U64 SenseBufferFreeQueueAddress; /* 0x30 */
> + U64 DriverInformationAddress; /* 0x38 */
> +} MPI3_IOC_INIT_REQUEST, MPI3_POINTER PTR_MPI3_IOC_INIT_REQUEST,
> + Mpi3IOCInitRequest_t, MPI3_POINTER pMpi3IOCInitRequest_t;
> +
> +
> +/**** Defines for the WhoInit field ****/
> +#define MPI3_WHOINIT_NOT_INITIALIZED (0x00)
> +#define MPI3_WHOINIT_ROM_BIOS (0x02)
> +#define MPI3_WHOINIT_HOST_DRIVER (0x03)
> +#define MPI3_WHOINIT_MANUFACTURER (0x04)
> +
> +/**** Defines for the DriverInformationAddress field */
> +typedef struct _MPI3_DRIVER_INFO_LAYOUT {
> + U32 InformationLength; /* 0x00 */
> + U8 DriverSignature[12]; /* 0x04 */
> + U8 OsName[16]; /* 0x10 */
> + U8 OsVersion[12]; /* 0x20 */
> + U8 DriverName[20]; /* 0x2C */
> + U8 DriverVersion[32]; /* 0x40 */
> + U8 DriverReleaseDate[20]; /* 0x60 */
> + U32 DriverCapabilities; /* 0x74 */
> +} MPI3_DRIVER_INFO_LAYOUT, MPI3_POINTER PTR_MPI3_DRIVER_INFO_LAYOUT,
> + Mpi3DriverInfoLayout_t, MPI3_POINTER pMpi3DriverInfoLayout_t;
> +
> +/*****************************************************************************
> + * IOCFacts Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_IOC_FACTS_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + U32 Reserved0C; /* 0x0C */
> + MPI3_SGE_UNION SGL; /* 0x10 */
> +} MPI3_IOC_FACTS_REQUEST, MPI3_POINTER PTR_MPI3_IOC_FACTS_REQUEST,
> + Mpi3IOCFactsRequest_t, MPI3_POINTER pMpi3IOCFactsRequest_t;
> +
> +/*****************************************************************************
> + * IOCFacts Data *
> + ****************************************************************************/
> +typedef struct _MPI3_IOC_FACTS_DATA {
> + U16 IOCFactsDataLength; /* 0x00 */
> + U16 Reserved02; /* 0x02 */
> + MPI3_VERSION_UNION MPIVersion; /* 0x04 */
> + MPI3_COMP_IMAGE_VERSION FWVersion; /* 0x08 */
> + U32 IOCCapabilities; /* 0x10 */
> + U8 IOCNumber; /* 0x14 */
> + U8 WhoInit; /* 0x15 */
> + U16 MaxMSIxVectors; /* 0x16 */
> + U16 MaxOutstandingRequest; /* 0x18 */
> + U16 ProductID; /* 0x1A */
> + U16 IOCRequestFrameSize; /* 0x1C */
> + U16 ReplyFrameSize; /* 0x1E */
> + U16 IOCExceptions; /* 0x20 */
> + U16 MaxPersistentID; /* 0x22 */
> + U8 SGEModifierMask; /* 0x24 */
> + U8 SGEModifierValue; /* 0x25 */
> + U8 SGEModifierShift; /* 0x26 */
> + U8 ProtocolFlags; /* 0x27 */
> + U16 MaxSASInitiators; /* 0x28 */
> + U16 MaxSASTargets; /* 0x2A */
> + U16 MaxSASExpanders; /* 0x2C */
> + U16 MaxEnclosures; /* 0x2E */
> + U16 MinDevHandle; /* 0x30 */
> + U16 MaxDevHandle; /* 0x32 */
> + U16 MaxPCIeSwitches; /* 0x34 */
> + U16 MaxNVMe; /* 0x36 */
> + U16 MaxPDs; /* 0x38 */
> + U16 MaxVDs; /* 0x3A */
> + U16 MaxHostPDs; /* 0x3C */
> + U16 MaxAdvancedHostPDs; /* 0x3E */
> + U16 MaxRAIDPDs; /* 0x40 */
> + U16 MaxPostedCmdBuffers; /* 0x42 */
> + U32 Flags; /* 0x44 */
> + U16 MaxOperationalRequestQueues; /* 0x48 */
> + U16 MaxOperationalReplyQueues; /* 0x4A */
> + U16 ShutdownTimeout; /* 0x4C */
> + U16 Reserved4E; /* 0x4E */
> + U32 DiagTraceSize; /* 0x50 */
> + U32 DiagFwSize; /* 0x54 */
> +} MPI3_IOC_FACTS_DATA, MPI3_POINTER PTR_MPI3_IOC_FACTS_DATA,
> + Mpi3IOCFactsData_t, MPI3_POINTER pMpi3IOCFactsData_t;
> +
> +/**** Defines for the IOCCapabilities field ****/
> +#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010)
> +#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001)
> +
> +/**** WhoInit values are defined under IOCInit Request Message definition ****/
> +
> +/**** Defines for the ProductID field ****/
> +#define MPI3_IOCFACTS_PID_TYPE_MASK (0xF000)
> +#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12)
> +#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0F00)
> +#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8)
> +#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00FF)
> +#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0)
> +
> +/**** Defines for the IOCExceptions field ****/
> +#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400)
> +#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080)
> +#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040)
> +#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020)
> +#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010)
> +#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001)
> +
> +/**** Defines for the ProtocolFlags field ****/
> +#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010)
> +#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008)
> +#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004)
> +#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
> +#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000)
> +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000FF00)
> +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000F)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
> +
> +
> +/*****************************************************************************
> + * Management Passthrough Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_MGMT_PASSTHROUGH_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + U32 Reserved0C[5]; /* 0x0C */
> + MPI3_SGE_UNION CommandSGL; /* 0x20 */
> + MPI3_SGE_UNION ResponseSGL; /* 0x30 */
> +} MPI3_MGMT_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_MGMT_PASSTHROUGH_REQUEST,
> + Mpi3MgmtPassthroughRequest_t, MPI3_POINTER pMpi3MgmtPassthroughRequest_t;
> +
> +/*****************************************************************************
> + * CreateRequestQueue Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_CREATE_REQUEST_QUEUE_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Flags; /* 0x0A */
> + U8 Burst; /* 0x0B */
> + U16 Size; /* 0x0C */
> + U16 QueueID; /* 0x0E */
> + U16 ReplyQueueID; /* 0x10 */
> + U16 Reserved12; /* 0x12 */
> + U32 Reserved14; /* 0x14 */
> + U64 BaseAddress; /* 0x18 */
> +} MPI3_CREATE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REQUEST_QUEUE_REQUEST,
> + Mpi3CreateRequestQueueRequest_t, MPI3_POINTER pMpi3CreateRequestQueueRequest_t;
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
> +
> +
> +/*****************************************************************************
> + * DeleteRequestQueue Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_DELETE_REQUEST_QUEUE_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 QueueID; /* 0x0A */
> +} MPI3_DELETE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REQUEST_QUEUE_REQUEST,
> + Mpi3DeleteRequestQueueRequest_t, MPI3_POINTER pMpi3DeleteRequestQueueRequest_t;
> +
> +
> +/*****************************************************************************
> + * CreateReplyQueue Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_CREATE_REPLY_QUEUE_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Flags; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U16 Size; /* 0x0C */
> + U16 QueueID; /* 0x0E */
> + U16 MSIxIndex; /* 0x10 */
> + U16 Reserved12; /* 0x12 */
> + U32 Reserved14; /* 0x14 */
> + U64 BaseAddress; /* 0x18 */
> +} MPI3_CREATE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REPLY_QUEUE_REQUEST,
> + Mpi3CreateReplyQueueRequest_t, MPI3_POINTER pMpi3CreateReplyQueueRequest_t;
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01)
> +
> +
> +/*****************************************************************************
> + * DeleteReplyQueue Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_DELETE_REPLY_QUEUE_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 QueueID; /* 0x0A */
> +} MPI3_DELETE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REPLY_QUEUE_REQUEST,
> + Mpi3DeleteReplyQueueRequest_t, MPI3_POINTER pMpi3DeleteReplyQueueRequest_t;
> +
> +
> +/*****************************************************************************
> + * PortEnable Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_PORT_ENABLE_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> +} MPI3_PORT_ENABLE_REQUEST, MPI3_POINTER PTR_MPI3_PORT_ENABLE_REQUEST,
> + Mpi3PortEnableRequest_t, MPI3_POINTER pMpi3PortEnableRequest_t;
> +
> +
> +/*****************************************************************************
> + * IOC Events and Event Management *
> + ****************************************************************************/
> +#define MPI3_EVENT_LOG_DATA (0x01)
> +#define MPI3_EVENT_CHANGE (0x02)
> +#define MPI3_EVENT_GPIO_INTERRUPT (0x04)
> +#define MPI3_EVENT_TEMP_THRESHOLD (0x05)
> +#define MPI3_EVENT_CABLE_MGMT (0x06)
> +#define MPI3_EVENT_DEVICE_ADDED (0x07)
> +#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08)
> +#define MPI3_EVENT_PREPARE_FOR_RESET (0x09)
> +#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0A)
> +#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0B)
> +#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0C)
> +#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0D)
> +#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0E)
> +#define MPI3_EVENT_SAS_DISCOVERY (0x11)
> +#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12)
> +#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13)
> +#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14)
> +#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15)
> +#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16)
> +#define MPI3_EVENT_SAS_PHY_COUNTER (0x18)
> +#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19)
> +#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20)
> +#define MPI3_EVENT_PCIE_ENUMERATION (0x22)
> +#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40)
> +#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60)
> +#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7F)
> +
> +
> +/*****************************************************************************
> + * Event Notification Request Message *
> + ****************************************************************************/
> +#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4)
> +
> +typedef struct _MPI3_EVENT_NOTIFICATION_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + U16 SASBroadcastPrimitiveMasks; /* 0x0C */
> + U16 SASNotifyPrimitiveMasks; /* 0x0E */
> + U32 EventMasks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; /* 0x10 */
> +} MPI3_EVENT_NOTIFICATION_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REQUEST,
> + Mpi3EventNotificationRequest_t, MPI3_POINTER pMpi3EventNotificationRequest_t;
> +
> +/**** Defines for the SASBroadcastPrimitiveMasks field - use MPI3_EVENT_PRIMITIVE_ values ****/
> +
> +/**** Defines for the SASNotifyPrimitiveMasks field - use MPI3_EVENT_NOTIFY_ values ****/
> +
> +/**** Defines for the EventMasks field - use MPI3_EVENT_ values ****/
> +
> +/*****************************************************************************
> + * Event Notification Reply Message *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_NOTIFICATION_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U8 EventDataLength; /* 0x10 */
> + U8 Event; /* 0x11 */
> + U16 IOCChangeCount; /* 0x12 */
> + U32 EventContext; /* 0x14 */
> + U32 EventData[1]; /* 0x18 */
> +} MPI3_EVENT_NOTIFICATION_REPLY, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REPLY,
> + Mpi3EventNotificationReply_t, MPI3_POINTER pMpi3EventNotificationReply_t;
> +
> +/**** Defines for the MsgFlags field ****/
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02)
> +
> +/**** Defines for the Event field - use MPI3_EVENT_ values ****/
> +
> +
> +/*****************************************************************************
> + * GPIO Interrupt Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_GPIO_INTERRUPT {
> + U8 GPIONum; /* 0x00 */
> + U8 Reserved01[3]; /* 0x01 */
> +} MPI3_EVENT_DATA_GPIO_INTERRUPT, MPI3_POINTER PTR_MPI3_EVENT_DATA_GPIO_INTERRUPT,
> + Mpi3EventDataGpioInterrupt_t, MPI3_POINTER pMpi3EventDataGpioInterrupt_t;
> +
> +
> +/*****************************************************************************
> + * Temperature Threshold Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_TEMP_THRESHOLD {
> + U16 Status; /* 0x00 */
> + U8 SensorNum; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U16 CurrentTemperature; /* 0x04 */
> + U16 Reserved06; /* 0x06 */
> + U32 Reserved08; /* 0x08 */
> + U32 Reserved0C; /* 0x0C */
> +} MPI3_EVENT_DATA_TEMP_THRESHOLD, MPI3_POINTER PTR_MPI3_EVENT_DATA_TEMP_THRESHOLD,
> + Mpi3EventDataTempThreshold_t, MPI3_POINTER pMpi3EventDataTempThreshold_t;
> +
> +/**** Defines for the Status field ****/
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001)
> +
> +
> +/*****************************************************************************
> + * Cable Management Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_CABLE_MANAGEMENT {
> + U32 ActiveCablePowerRequirement; /* 0x00 */
> + U8 Status; /* 0x04 */
> + U8 ReceptacleID; /* 0x05 */
> + U16 Reserved06; /* 0x06 */
> +} MPI3_EVENT_DATA_CABLE_MANAGEMENT, MPI3_POINTER PTR_MPI3_EVENT_DATA_CABLE_MANAGEMENT,
> + Mpi3EventDataCableManagement_t, MPI3_POINTER pMpi3EventDataCableManagement_t;
> +
> +/**** Defines for the ActiveCablePowerRequirement field ****/
> +#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xFFFFFFFF)
> +
> +/**** Defines for the Status field ****/
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00)
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01)
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02)
> +
> +
> +/*****************************************************************************
> + * Event Ack Request Message *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_ACK_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + U8 Event; /* 0x0C */
> + U8 Reserved0D[3]; /* 0x0D */
> + U32 EventContext; /* 0x10 */
> +} MPI3_EVENT_ACK_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_ACK_REQUEST,
> + Mpi3EventAckRequest_t, MPI3_POINTER pMpi3EventAckRequest_t;
> +
> +/**** Defines for the Event field - use MPI3_EVENT_ values ****/
> +
> +
> +/*****************************************************************************
> + * Prepare for Reset Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_PREPARE_FOR_RESET {
> + U8 ReasonCode; /* 0x00 */
> + U8 Reserved01; /* 0x01 */
> + U16 Reserved02; /* 0x02 */
> +} MPI3_EVENT_DATA_PREPARE_FOR_RESET, MPI3_POINTER PTR_MPI3_EVENT_DATA_PREPARE_FOR_RESET,
> + Mpi3EventDataPrepareForReset_t, MPI3_POINTER pMpi3EventDataPrepareForReset_t;
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01)
> +#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02)
> +
> +
> +/*****************************************************************************
> + * Component Image Activation Start Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION {
> + U32 Reserved00; /* 0x00 */
> +} MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION,
> + Mpi3EventDataCompImageActivation, MPI3_POINTER pMpi3EventDataCompImageActivation;
> +
> +/*****************************************************************************
> + * Device Added Event *
> + ****************************************************************************/
> +/*
> + * The Device Added Event Data is exactly the same as Device Page 0 data
> + * (including the Configuration Page header). So, please use/refer to
> + * MPI3_DEVICE_PAGE0 structure for Device Added Event data.
> + */
> +
> +/****************************************************************************
> + * Device Info Changed Event *
> + ****************************************************************************/
> +/*
> + * The Device Info Changed Event Data is exactly the same as Device Page 0 data
> + * (including the Configuration Page header). So, please use/refer to
> + * MPI3_DEVICE_PAGE0 structure for Device Added Event data.
> + */
> +
> +/*****************************************************************************
> + * Device Status Change Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE {
> + U16 TaskTag; /* 0x00 */
> + U8 ReasonCode; /* 0x02 */
> + U8 IOUnitPort; /* 0x03 */
> + U16 ParentDevHandle; /* 0x04 */
> + U16 DevHandle; /* 0x06 */
> + U64 WWID; /* 0x08 */
> + U8 LUN[8]; /* 0x10 */
> +} MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE,
> + Mpi3EventDataDeviceStatusChange_t, MPI3_POINTER pMpi3EventDataDeviceStatusChange_t;
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01)
> +#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02)
> +#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03)
> +#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25)
> +#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30)
> +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40)
> +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41)
> +#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50)
> +
> +/*****************************************************************************
> + * Energy Pack Change Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_ENERGY_PACK_CHANGE {
> + U32 Reserved00; /* 0x00 */
> + U16 ShutdownTimeout; /* 0x04 */
> + U16 Reserved06; /* 0x06 */
> +} MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_ENERGY_PACK_CHANGE,
> + Mpi3EventDataEnergyPackChange_t, MPI3_POINTER pMpi3EventDataEnergyPackChange_t;
> +
> +/*****************************************************************************
> + * SAS Discovery Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_DISCOVERY {
> + U8 Flags; /* 0x00 */
> + U8 ReasonCode; /* 0x01 */
> + U8 IOUnitPort; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U32 DiscoveryStatus; /* 0x04 */
> +} MPI3_EVENT_DATA_SAS_DISCOVERY, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DISCOVERY,
> + Mpi3EventDataSasDiscovery_t, MPI3_POINTER pMpi3EventDataSasDiscovery_t;
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02)
> +#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01)
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01)
> +#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02)
> +
> +/**** Defines for the DiscoveryStatus field ****/
> +#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000)
> +#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000)
> +#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000)
> +#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000)
> +#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800)
> +#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400)
> +#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200)
> +#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100)
> +#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080)
> +#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040)
> +#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020)
> +#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010)
> +#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008)
> +#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004)
> +#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002)
> +#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001)
> +
> +
> +/*****************************************************************************
> + * SAS Broadcast Primitive Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
> + U8 PhyNum; /* 0x00 */
> + U8 IOUnitPort; /* 0x01 */
> + U8 PortWidth; /* 0x02 */
> + U8 Primitive; /* 0x03 */
> +} MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
> + Mpi3EventDataSasBroadcastPrimitive_t, MPI3_POINTER pMpi3EventDataSasBroadcastPrimitive_t;
> +
> +/**** Defines for the Primitive field ****/
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08)
> +
> +
> +/*****************************************************************************
> + * SAS Notify Primitive Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
> + U8 PhyNum; /* 0x00 */
> + U8 IOUnitPort; /* 0x01 */
> + U8 Reserved02; /* 0x02 */
> + U8 Primitive; /* 0x03 */
> +} MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
> + Mpi3EventDataSasNotifyPrimitive_t, MPI3_POINTER pMpi3EventDataSasNotifyPrimitive_t;
> +
> +/**** Defines for the Primitive field ****/
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04)
> +
> +
> +/*****************************************************************************
> + * SAS Topology Change List Event *
> + ****************************************************************************/
> +#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT
> +#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1)
> +#endif /* MPI3_EVENT_SAS_TOPO_PHY_COUNT */
> +
> +typedef struct _MPI3_EVENT_SAS_TOPO_PHY_ENTRY {
> + U16 AttachedDevHandle; /* 0x00 */
> + U8 LinkRate; /* 0x02 */
> + U8 Status; /* 0x03 */
> +} MPI3_EVENT_SAS_TOPO_PHY_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_SAS_TOPO_PHY_ENTRY,
> + Mpi3EventSasTopoPhyEntry_t, MPI3_POINTER pMpi3EventSasTopoPhyEntry_t;
> +
> +/**** Defines for the LinkRate field ****/
> +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
> +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
> +#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
> +#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
> +#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
> +#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
> +#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
> +#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
> +#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
> +#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
> +#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
> +
> +/**** Defines for the PhyStatus field ****/
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xC0)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0F)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06)
> +
> +
> +typedef struct _MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
> + U16 EnclosureHandle; /* 0x00 */
> + U16 ExpanderDevHandle; /* 0x02 */
> + U8 NumPhys; /* 0x04 */
> + U8 Reserved05[3]; /* 0x05 */
> + U8 NumEntries; /* 0x08 */
> + U8 StartPhyNum; /* 0x09 */
> + U8 ExpStatus; /* 0x0A */
> + U8 IOUnitPort; /* 0x0B */
> + MPI3_EVENT_SAS_TOPO_PHY_ENTRY PhyEntry[MPI3_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C */
> +} MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
> + Mpi3EventDataSasTopologyChangeList_t, MPI3_POINTER pMpi3EventDataSasTopologyChangeList_t;
> +
> +/**** Defines for the ExpStatus field ****/
> +#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
> +#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
> +#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
> +
> +/*****************************************************************************
> + * SAS PHY Counter Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_PHY_COUNTER {
> + U64 TimeStamp; /* 0x00 */
> + U32 Reserved08; /* 0x08 */
> + U8 PhyEventCode; /* 0x0C */
> + U8 PhyNum; /* 0x0D */
> + U16 Reserved0E; /* 0x0E */
> + U32 PhyEventInfo; /* 0x10 */
> + U8 CounterType; /* 0x14 */
> + U8 ThresholdWindow; /* 0x15 */
> + U8 TimeUnits; /* 0x16 */
> + U8 Reserved17; /* 0x17 */
> + U32 EventThreshold; /* 0x18 */
> + U16 ThresholdFlags; /* 0x1C */
> + U16 Reserved1E; /* 0x1E */
> +} MPI3_EVENT_DATA_SAS_PHY_COUNTER, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_PHY_COUNTER,
> + Mpi3EventDataSasPhyCounter_t, MPI3_POINTER pMpi3EventDataSasPhyCounter_t;
> +
> +/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines ****/
> +
> +/**** Defines for the CounterType field - use MPI3_SASPHY3_COUNTER_TYPE_ defines ****/
> +
> +/**** Defines for the TimeUnits field - use MPI3_SASPHY3_TIME_UNITS_ defines ****/
> +
> +/**** Defines for the ThresholdFlags field - use MPI3_SASPHY3_TFLAGS_ defines ****/
> +
> +
> +/*****************************************************************************
> + * SAS Device Discovery Error Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR {
> + U16 DevHandle; /* 0x00 */
> + U8 ReasonCode; /* 0x02 */
> + U8 IOUnitPort; /* 0x03 */
> + U32 Reserved04; /* 0x04 */
> + U64 SASAddress; /* 0x08 */
> +} MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR,
> + Mpi3EventDataSasDeviceDiscErr_t, MPI3_POINTER pMpi3EventDataSasDeviceDiscErr_t;
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01)
> +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02)
> +
> +/*****************************************************************************
> + * PCIe Enumeration Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_PCIE_ENUMERATION {
> + U8 Flags; /* 0x00 */
> + U8 ReasonCode; /* 0x01 */
> + U8 IOUnitPort; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U32 EnumerationStatus; /* 0x04 */
> +} MPI3_EVENT_DATA_PCIE_ENUMERATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_ENUMERATION,
> + Mpi3EventDataPcieEnumeration_t, MPI3_POINTER pMpi3EventDataPcieEnumeration_t;
> +
> +/**** Defines for the Flags field ****/
> +#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02)
> +#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01)
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01)
> +#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
> +
> +/**** Defines for the EnumerationStatus field ****/
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
> +
> +
> +/*****************************************************************************
> + * PCIe Topology Change List Event *
> + ****************************************************************************/
> +#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT
> +#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1)
> +#endif /* MPI3_EVENT_PCIE_TOPO_PORT_COUNT */
> +
> +typedef struct _MPI3_EVENT_PCIE_TOPO_PORT_ENTRY {
> + U16 AttachedDevHandle; /* 0x00 */
> + U8 PortStatus; /* 0x02 */
> + U8 Reserved03; /* 0x03 */
> + U8 CurrentPortInfo; /* 0x04 */
> + U8 Reserved05; /* 0x05 */
> + U8 PreviousPortInfo; /* 0x06 */
> + U8 Reserved07; /* 0x07 */
> +} MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_PCIE_TOPO_PORT_ENTRY,
> + Mpi3EventPcieTopoPortEntry_t, MPI3_POINTER pMpi3EventPcieTopoPortEntry_t;
> +
> +/**** Defines for the PortStatus field ****/
> +#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
> +#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
> +#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06)
> +
> +/**** Defines for the CurrentPortInfo and PreviousPortInfo field ****/
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xF0)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50)
> +
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06)
> +
> +typedef struct _MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
> + U16 EnclosureHandle; /* 0x00 */
> + U16 SwitchDevHandle; /* 0x02 */
> + U8 NumPorts; /* 0x04 */
> + U8 Reserved05[3]; /* 0x05 */
> + U8 NumEntries; /* 0x08 */
> + U8 StartPortNum; /* 0x09 */
> + U8 SwitchStatus; /* 0x0A */
> + U8 IOUnitPort; /* 0x0B */
> + U32 Reserved0C; /* 0x0C */
> + MPI3_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x10 */
> +} MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
> + Mpi3EventDataPcieTopologyChangeList_t, MPI3_POINTER pMpi3EventDataPcieTopologyChangeList_t;
> +
> +/**** Defines for the SwitchStatus field ****/
> +#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
> +
> +/****************************************************************************
> + * Enclosure Device Added Event *
> + ****************************************************************************/
> +/*
> + * The Enclosure Device Added Event Data is exactly the same as Enclosure
> + * Page 0 data (including the Configuration Page header). So, please
> + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Added
> + * Event data.
> + */
> +
> +/****************************************************************************
> + * Enclosure Device Changed Event *
> + ****************************************************************************/
> +/*
> + * The Enclosure Device Change Event Data is exactly the same as Enclosure
> + * Page 0 data (including the Configuration Page header). So, please
> + * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Change
> + * Event data.
> + */
> +
> +/*****************************************************************************
> + * SAS Initiator Device Status Change Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
> + U8 ReasonCode; /* 0x00 */
> + U8 IOUnitPort; /* 0x01 */
> + U16 DevHandle; /* 0x02 */
> + U32 Reserved04; /* 0x04 */
> + U64 SASAddress; /* 0x08 */
> +} MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
> + Mpi3EventDataSasInitDevStatusChange_t, MPI3_POINTER pMpi3EventDataSasInitDevStatusChange_t;
> +
> +/**** Defines for the ReasonCode field ****/
> +#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01)
> +#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
> +
> +
> +/*****************************************************************************
> + * SAS Initiator Device Table Overflow Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
> + U16 MaxInit; /* 0x00 */
> + U16 CurrentInit; /* 0x02 */
> + U32 Reserved04; /* 0x04 */
> + U64 SASAddress; /* 0x08 */
> +} MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
> + Mpi3EventDataSasInitTableOverflow_t, MPI3_POINTER pMpi3EventDataSasInitTableOverflow_t;
> +
> +
> +/*****************************************************************************
> + * Hard Reset Received Event *
> + ****************************************************************************/
> +typedef struct _MPI3_EVENT_DATA_HARD_RESET_RECEIVED {
> + U8 Reserved00; /* 0x00 */
> + U8 IOUnitPort; /* 0x01 */
> + U16 Reserved02; /* 0x02 */
> +} MPI3_EVENT_DATA_HARD_RESET_RECEIVED, MPI3_POINTER PTR_MPI3_EVENT_DATA_HARD_RESET_RECEIVED,
> + Mpi3EventDataHardResetReceived_t, MPI3_POINTER pMpi3EventDataHardResetReceived_t;
> +
> +
> +/*****************************************************************************
> + * Persistent Event Logs *
> + ****************************************************************************/
> +
> +/**** Definitions for the Locale field ****/
> +#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200)
> +#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100)
> +#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080)
> +#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040)
> +#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020)
> +#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010)
> +#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008)
> +#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004)
> +#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002)
> +#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001)
> +
> +/**** Definitions for the Class field ****/
> +#define MPI3_PEL_CLASS_DEBUG (0x00)
> +#define MPI3_PEL_CLASS_PROGRESS (0x01)
> +#define MPI3_PEL_CLASS_INFORMATIONAL (0x02)
> +#define MPI3_PEL_CLASS_WARNING (0x03)
> +#define MPI3_PEL_CLASS_CRITICAL (0x04)
> +#define MPI3_PEL_CLASS_FATAL (0x05)
> +#define MPI3_PEL_CLASS_FAULT (0x06)
> +
> +/**** Definitions for the ClearType field ****/
> +#define MPI3_PEL_CLEARTYPE_CLEAR (0x00)
> +
> +/**** Definitions for the WaitTime field ****/
> +#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00)
> +
> +/**** Definitions for the Action field ****/
> +#define MPI3_PEL_ACTION_GET_SEQNUM (0x01)
> +#define MPI3_PEL_ACTION_MARK_CLEAR (0x02)
> +#define MPI3_PEL_ACTION_GET_LOG (0x03)
> +#define MPI3_PEL_ACTION_GET_COUNT (0x04)
> +#define MPI3_PEL_ACTION_WAIT (0x05)
> +#define MPI3_PEL_ACTION_ABORT (0x06)
> +#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07)
> +#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08)
> +
> +/**** Definitions for the LogStatus field ****/
> +#define MPI3_PEL_STATUS_SUCCESS (0x00)
> +#define MPI3_PEL_STATUS_NOT_FOUND (0x01)
> +#define MPI3_PEL_STATUS_ABORTED (0x02)
> +#define MPI3_PEL_STATUS_NOT_READY (0x03)
> +
> +/****************************************************************************
> + * PEL Sequence Numbers *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_SEQ {
> + U32 Newest; /* 0x00 */
> + U32 Oldest; /* 0x04 */
> + U32 Clear; /* 0x08 */
> + U32 Shutdown; /* 0x0C */
> + U32 Boot; /* 0x10 */
> + U32 LastAcknowledged; /* 0x14 */
> +} MPI3_PEL_SEQ, MPI3_POINTER PTR_MPI3_PEL_SEQ,
> + Mpi3PELSeq_t, MPI3_POINTER pMpi3PELSeq_t;
> +
> +/****************************************************************************
> + * PEL Entry *
> + ****************************************************************************/
> +
> +typedef struct _MPI3_PEL_ENTRY {
> + U32 SequenceNumber; /* 0x00 */
> + U32 TimeStamp[2]; /* 0x04 */
> + U16 LogCode; /* 0x0C */
> + U16 ArgType; /* 0x0E */
> + U16 Locale; /* 0x10 */
> + U8 Class; /* 0x12 */
> + U8 Reserved13; /* 0x13 */
> + U8 ExtNum; /* 0x14 */
> + U8 NumExts; /* 0x15 */
> + U8 ArgDataSize; /* 0x16 */
> + U8 FixedFormatSize; /* 0x17 */
> + U32 Reserved18[2]; /* 0x18 */
> + U32 PELInfo[24]; /* 0x20 - 0x7F */
> +} MPI3_PEL_ENTRY, MPI3_POINTER PTR_MPI3_PEL_ENTRY,
> + Mpi3PELEntry_t, MPI3_POINTER pMpi3PELEntry_t;
> +
> +/****************************************************************************
> + * PEL Event List *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_LIST {
> + U32 LogCount; /* 0x00 */
> + U32 Reserved04; /* 0x04 */
> + MPI3_PEL_ENTRY Entry[1]; /* 0x08 */ /* variable length */
> +} MPI3_PEL_LIST, MPI3_POINTER PTR_MPI3_PEL_LIST,
> + Mpi3PELList_t, MPI3_POINTER pMpi3PELList_t;
> +
> +/****************************************************************************
> + * PEL Count Data *
> + ****************************************************************************/
> +typedef U32 MPI3_PEL_LOG_COUNT, MPI3_POINTER PTR_MPI3_PEL_LOG_COUNT,
> + Mpi3PELLogCount_t, MPI3_POINTER pMpi3PELLogCount_t;
> +
> +/****************************************************************************
> + * PEL Arg Map *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_ARG_MAP {
> + U8 ArgType; /* 0x00 */
> + U8 Length; /* 0x01 */
> + U16 StartLocation; /* 0x02 */
> +} MPI3_PEL_ARG_MAP, MPI3_POINTER PTR_MPI3_PEL_ARG_MAP,
> + Mpi3PELArgMap_t, MPI3_POINTER pMpi3PELArgMap_t;
> +
> +/**** Definitions for the ArgType field ****/
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03)
> +
> +
> +/****************************************************************************
> + * PEL Print String *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_PRINT_STRING {
> + U16 LogCode; /* 0x00 */
> + U16 StringLength; /* 0x02 */
> + U8 NumArgMap; /* 0x04 */
> + U8 Reserved05[3]; /* 0x05 */
> + MPI3_PEL_ARG_MAP ArgMap[1]; /* 0x08 */ /* variable length */
> +} MPI3_PEL_PRINT_STRING, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING,
> + Mpi3PELPrintString_t, MPI3_POINTER pMpi3PELPrintString_t;
> +
> +/****************************************************************************
> + * PEL Print String List *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_PRINT_STRING_LIST {
> + U32 NumPrintStrings; /* 0x00 */
> + U32 ResidualBytesRemain; /* 0x04 */
> + U32 Reserved08[2]; /* 0x08 */
> + MPI3_PEL_PRINT_STRING PrintString[1]; /* 0x10 */ /* variable length */
> +} MPI3_PEL_PRINT_STRING_LIST, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING_LIST,
> + Mpi3PELPrintStringList_t, MPI3_POINTER pMpi3PELPrintStringList_t;
> +
> +
> +/****************************************************************************
> + * PEL Request Msg - generic to allow header decoding *
> + ****************************************************************************/
> +#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX
> +#define MPI3_PEL_ACTION_SPECIFIC_MAX (1)
> +#endif /* MPI3_PEL_ACTION_SPECIFIC_MAX */
> +
> +typedef struct _MPI3_PEL_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 ActionSpecific[MPI3_PEL_ACTION_SPECIFIC_MAX]; /* 0x0C */ /* variable length */
> +} MPI3_PEL_REQUEST, MPI3_POINTER PTR_MPI3_PEL_REQUEST,
> + Mpi3PELRequest_t, MPI3_POINTER pMpi3PELRequest_t;
> +
> +/****************************************************************************
> + * PEL ACTION Get Sequence Nembers *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 Reserved0C[5]; /* 0x0C */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS,
> + Mpi3PELReqActionGetSequenceNumbers_t, MPI3_POINTER pMpi3PELReqActionGetSequenceNumbers_t;
> +
> +/****************************************************************************
> + * PEL ACTION Clear Log *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U8 ClearType; /* 0x0C */
> + U8 Reserved0D[3]; /* 0x0D */
> +} MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER,
> + Mpi3PELReqActionClearLogMMarker_t, MPI3_POINTER pMpi3PELReqActionClearLogMMarker_t;
> +
> +/****************************************************************************
> + * PEL ACTION Get Log *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_GET_LOG {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 StartingSequenceNumber; /* 0x0C */
> + U16 Locale; /* 0x10 */
> + U8 Class; /* 0x12 */
> + U8 Reserved13; /* 0x13 */
> + U32 Reserved14[3]; /* 0x14 */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_PEL_REQ_ACTION_GET_LOG, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_LOG,
> + Mpi3PELReqActionGetLog_t, MPI3_POINTER pMpi3PELReqActionGetLog_t;
> +
> +/****************************************************************************
> + * PEL ACTION Get Count *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_GET_COUNT {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 StartingSequenceNumber; /* 0x0C */
> + U16 Locale; /* 0x10 */
> + U8 Class; /* 0x12 */
> + U8 Reserved13; /* 0x13 */
> + U32 Reserved14[3]; /* 0x14 */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_PEL_REQ_ACTION_GET_COUNT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_COUNT,
> + Mpi3PELReqActionGetCount_t, MPI3_POINTER pMpi3PELReqActionGetCount_t;
> +
> +/****************************************************************************
> + * PEL ACTION Wait *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_WAIT {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 StartingSequenceNumber; /* 0x0C */
> + U16 Locale; /* 0x10 */
> + U8 Class; /* 0x12 */
> + U8 Reserved13; /* 0x13 */
> + U16 WaitTime; /* 0x14 */
> + U16 Reserved16; /* 0x16 */
> + U32 Reserved18[2]; /* 0x18 */
> +} MPI3_PEL_REQ_ACTION_WAIT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_WAIT,
> + Mpi3PELReqActionWait_t, MPI3_POINTER pMpi3PELReqActionWait_t;
> +
> +/****************************************************************************
> + * PEL ACTION Abort *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_ABORT {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 Reserved0C; /* 0x0C */
> + U16 AbortHostTag; /* 0x10 */
> + U16 Reserved12; /* 0x12 */
> + U32 Reserved14; /* 0x14 */
> +} MPI3_PEL_REQ_ACTION_ABORT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ABORT,
> + Mpi3PELReqActionAbort_t, MPI3_POINTER pMpi3PELReqActionAbort_t;
> +
> +/****************************************************************************
> + * PEL ACTION Get Print Strings *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 Reserved0C; /* 0x0C */
> + U16 StartLogCode; /* 0x10 */
> + U16 Reserved12; /* 0x12 */
> + U32 Reserved14[3]; /* 0x14 */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS,
> + Mpi3PELReqActionGetPrintStrings_t, MPI3_POINTER pMpi3PELReqActionGetPrintStrings_t;
> +
> +/****************************************************************************
> + * PEL ACTION Acknowledge *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REQ_ACTION_ACKNOWLEDGE {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 SequenceNumber; /* 0x0C */
> + U32 Reserved10; /* 0x10 */
> +} MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ACKNOWLEDGE,
> + Mpi3PELReqActionAcknowledge_t, MPI3_POINTER pMpi3PELReqActionAcknowledge_t;
> +
> +/**** Definitions for the MsgFlags field ****/
> +#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01)
> +
> +/****************************************************************************
> + * PEL Reply *
> + ****************************************************************************/
> +typedef struct _MPI3_PEL_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U8 Action; /* 0x10 */
> + U8 Reserved11; /* 0x11 */
> + U16 Reserved12; /* 0x12 */
> + U16 PELogStatus; /* 0x14 */
> + U16 Reserved16; /* 0x16 */
> + U32 TransferLength; /* 0x18 */
> +} MPI3_PEL_REPLY, MPI3_POINTER PTR_MPI3_PEL_REPLY,
> + Mpi3PELReply_t, MPI3_POINTER pMpi3PELReply_t;
> +
> +
> +/*****************************************************************************
> + * Component Image Download *
> + ****************************************************************************/
> +typedef struct _MPI3_CI_DOWNLOAD_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Action; /* 0x0A */
> + U8 Reserved0B; /* 0x0B */
> + U32 Signature1; /* 0x0C */
> + U32 TotalImageSize; /* 0x10 */
> + U32 ImageOffset; /* 0x14 */
> + U32 SegmentSize; /* 0x18 */
> + U32 Reserved1C; /* 0x1C */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_CI_DOWNLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REQUEST,
> + Mpi3CIDownloadRequest_t, MPI3_POINTER pMpi3CIDownloadRequest_t;
> +
> +/**** Definitions for the MsgFlags field ****/
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02)
> +
> +/**** Definitions for the Action field ****/
> +#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01)
> +#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02)
> +#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03)
> +#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04)
> +
> +typedef struct _MPI3_CI_DOWNLOAD_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U8 Flags; /* 0x10 */
> + U8 CacheDirty; /* 0x11 */
> + U8 PendingCount; /* 0x12 */
> + U8 Reserved13; /* 0x13 */
> +} MPI3_CI_DOWNLOAD_REPLY, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REPLY,
> + Mpi3CIDownloadReply_t, MPI3_POINTER pMpi3CIDownloadReply_t;
> +
> +/**** Definitions for the Flags field ****/
> +#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80)
> +#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0E)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06)
> +#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01)
> +
> +/*****************************************************************************
> + * Component Image Upload *
> + ****************************************************************************/
> +typedef struct _MPI3_CI_UPLOAD_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 Reserved0A; /* 0x0A */
> + U32 Signature1; /* 0x0C */
> + U32 Reserved10; /* 0x10 */
> + U32 ImageOffset; /* 0x14 */
> + U32 SegmentSize; /* 0x18 */
> + U32 Reserved1C; /* 0x1C */
> + MPI3_SGE_UNION SGL; /* 0x20 */
> +} MPI3_CI_UPLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_UPLOAD_REQUEST,
> + Mpi3CIUploadRequest_t, MPI3_POINTER pMpi3CIUploadRequest_t;
> +
> +/**** Defines for the MsgFlags field ****/
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02)
> +
> +/**** Defines for Signature1 field - use MPI3_IMAGE_HEADER_SIGNATURE1_ defines */
> +
> +/*****************************************************************************
> + * IO Unit Control *
> + ****************************************************************************/
> +
> +/**** Definitions for the Operation field ****/
> +#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01)
> +#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02)
> +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04)
> +#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05)
> +#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10)
> +#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11)
> +#define MPI3_CTRL_OP_HIDDEN_ACK (0x12)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20)
> +#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21)
> +#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22)
> +
> +/**** Depending on the Operation selected, the various ParamX fields *****/
> +/**** contain defined data values. These indexes help identify those values *****/
> +#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00)
> +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00)
> +#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
> +#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
> +
> +/**** Definitions for the LookupMethod field ****/
> +#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
> +#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04)
> +
> +/**** Definitions for IoUnitControl Lookup Mapping Method Parameters ****/
> +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1)
> +
> +/*** Definitions for IoUnitControl Reply fields ****/
> +#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0)
> +#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0)
> +
> +
> +/**** Definitions for the PrimSeq field ****/
> +#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01)
> +#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03)
> +#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06)
> +
> +typedef struct _MPI3_IOUNIT_CONTROL_REQUEST {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U8 Reserved0A; /* 0x0A */
> + U8 Operation; /* 0x0B */
> + U32 Reserved0C; /* 0x0C */
> + U64 Param64[2]; /* 0x10 */
> + U32 Param32[4]; /* 0x20 */
> + U16 Param16[4]; /* 0x30 */
> + U8 Param8[8]; /* 0x38 */
> +} MPI3_IOUNIT_CONTROL_REQUEST, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REQUEST,
> + Mpi3IoUnitControlRequest_t, MPI3_POINTER pMpi3IoUnitControlRequest_t;
> +
> +
> +typedef struct _MPI3_IOUNIT_CONTROL_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> + U64 Value64[2]; /* 0x10 */
> + U32 Value32[4]; /* 0x20 */
> + U16 Value16[4]; /* 0x30 */
> + U8 Value8[8]; /* 0x38 */
> +} MPI3_IOUNIT_CONTROL_REPLY, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REPLY,
> + Mpi3IoUnitControlReply_t, MPI3_POINTER pMpi3IoUnitControlReply_t;
> +
> +#endif /* MPI30_IOC_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
> new file mode 100644
> index 000000000000..54f821d25209
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
> @@ -0,0 +1,675 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_transport.h
> + * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc
> + * Creation Date: 08/31/2016
> + * Version: 03.00.00
> + *
> + * mpi3.h Version: 03.00.00.18
> + *
> + *
> + * Version History
> + * ---------------
> + *
> + * Date Version Description
> + * -------- ----------- ------------------------------------------------------
> + * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H.
> + * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I.
> + * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J.
> + * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L.
> + * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M.
> + * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N.
> + * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O.
> + * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P.
> + * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q.
> + * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R.
> + */
> +#ifndef MPI30_TRANSPORT_H
> +#define MPI30_TRANSPORT_H 1
> +
> +/*****************************************************************************
> + * Common version structure/union used in *
> + * messages and configuration pages *
> + ****************************************************************************/
> +
> +typedef struct _MPI3_VERSION_STRUCT {
> + U8 Dev; /* 0x00 */
> + U8 Unit; /* 0x01 */
> + U8 Minor; /* 0x02 */
> + U8 Major; /* 0x03 */
> +} MPI3_VERSION_STRUCT, MPI3_POINTER PTR_MPI3_VERSION_STRUCT,
> + Mpi3VersionStruct, MPI3_POINTER pMpi3VersionStruct;
> +
> +typedef union _MPI3_VERSION_UNION {
> + MPI3_VERSION_STRUCT Struct;
> + U32 Word;
> +} MPI3_VERSION_UNION, MPI3_POINTER PTR_MPI3_VERSION_UNION,
> + Mpi3VersionUnion, MPI3_POINTER pMpi3VersionUnion;
> +
> +/****** Version constants for this revision ****/
> +#define MPI3_VERSION_MAJOR (3)
> +#define MPI3_VERSION_MINOR (0)
> +#define MPI3_VERSION_UNIT (0)
> +#define MPI3_VERSION_DEV (18)
> +
> +
> +/*****************************************************************************
> + * System Interface Register Definitions *
> + ****************************************************************************/
> +typedef struct _MPI3_SYSIF_OPER_QUEUE_INDEXES {
> + U16 ProducerIndex; /* 0x00 */
> + U16 Reserved02; /* 0x02 */
> + U16 ConsumerIndex; /* 0x04 */
> + U16 Reserved06; /* 0x06 */
> +} MPI3_SYSIF_OPER_QUEUE_INDEXES, MPI3_POINTER PTR_MPI3_SYSIF_OPER_QUEUE_INDEXES;
> +
> +typedef volatile struct _MPI3_SYSIF_REGISTERS
> +{
> + U64 IOCInformation; /* 0x00 */
> + MPI3_VERSION_UNION Version; /* 0x08 */
> + U32 Reserved0C[2]; /* 0x0C */
> + U32 IOCConfiguration; /* 0x14 */
> + U32 Reserved18; /* 0x18 */
> + U32 IOCStatus; /* 0x1C */
> + U32 Reserved20; /* 0x20 */
> + U32 AdminQueueNumEntries; /* 0x24 */
> + U64 AdminRequestQueueAddress; /* 0x28 */
> + U64 AdminReplyQueueAddress; /* 0x30 */
> + U32 Reserved38[2]; /* 0x38 */
> + U32 CoalesceControl; /* 0x40 */
> + U32 Reserved44[1007]; /* 0x44 */
> + U16 AdminRequestQueuePI; /* 0x1000 */
> + U16 Reserved1002; /* 0x1002 */
> + U16 AdminReplyQueueCI; /* 0x1004 */
> + U16 Reserved1006; /* 0x1006 */
> + MPI3_SYSIF_OPER_QUEUE_INDEXES OperQueueIndexes[383]; /* 0x1008 */
> + U32 Reserved1C00; /* 0x1C00 */
> + U32 WriteSequence; /* 0x1C04 */
> + U32 HostDiagnostic; /* 0x1C08 */
> + U32 Reserved1C0C; /* 0x1C0C */
> + U32 Fault; /* 0x1C10 */
> + U32 FaultInfo[3]; /* 0x1C14 */
> + U32 Reserved1C20[4]; /* 0x1C20 */
> + U64 HCBAddress; /* 0x1C30 */
> + U32 HCBSize; /* 0x1C38 */
> + U32 Reserved1C3C; /* 0x1C3C */
> + U32 ReplyFreeHostIndex; /* 0x1C40 */
> + U32 SenseBufferFreeHostIndex; /* 0x1C44 */
> + U32 Reserved1C48[2]; /* 0x1C48 */
> + U64 DiagRWData; /* 0x1C50 */
> + U64 DiagRWAddress; /* 0x1C58 */
> + U16 DiagRWControl; /* 0x1C60 */
> + U16 DiagRWStatus; /* 0x1C62 */
> + U32 Reserved1C64[35]; /* 0x1C64 */
> + U32 Scratchpad[4]; /* 0x1CF0 */
> + U32 Reserved1D00[192]; /* 0x1D00 */
> + U32 DeviceAssignedRegisters[2048]; /* 0x2000 */
> +} MPI3_SYSIF_REGS, MPI3_POINTER PTR_MPI3_SYSIF_REGS,
> + Mpi3SysIfRegs_t, MPI3_POINTER pMpi3SysIfRegs_t;
> +
> +/**** Defines for the IOCInformation register ****/
> +#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000)
> +#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004)
> +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xFF000000)
> +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24)
> +
> +/**** Defines for the IOCConfiguration register ****/
> +#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00F00000)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000F0000)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000C000)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000)
> +#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000)
> +#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010)
> +#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001)
> +
> +/**** Defines for the IOCStatus register ****/
> +#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001C)
> +#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000C)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008)
> +#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002)
> +#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001)
> +
> +/**** Defines for the AdminQueueNumEntries register ****/
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0FFF)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0FFF0000)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16)
> +
> +/**** Defines for the AdminRequestQueueAddress register ****/
> +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028)
> +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002C)
> +
> +/**** Defines for the AdminReplyQueueAddress register ****/
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030)
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034)
> +
> +/**** Defines for the CoalesceControl register ****/
> +#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xC0000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xC0000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00FF0000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16)
> +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000FF00)
> +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8)
> +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000FF)
> +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0)
> +
> +/**** Defines for the AdminRequestQueuePI register ****/
> +#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000)
> +
> +/**** Defines for the AdminReplyQueueCI register ****/
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004)
> +
> +/**** Defines for the OperationalRequestQueuePI register */
> +#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008)
> +#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(N) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */
> +
> +/**** Defines for the OperationalReplyQueueCI register */
> +#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100C)
> +#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(N) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((N)-1)*8)) /* N = 1, 2, 3, ..., 255 */
> +
> +/**** Defines for the WriteSequence register *****/
> +#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001C04)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000F)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xF)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xB)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xD)
> +
> +/**** Defines for the HostDiagnostic register *****/
> +#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001C08)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700)
> +#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080)
> +#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040)
> +#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020)
> +#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010)
> +#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008)
> +#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004)
> +#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002)
> +#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001)
> +
> +/**** Defines for the Fault register ****/
> +#define MPI3_SYSIF_FAULT_OFFSET (0x00001C10)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xFF000000)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000)
> +#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000FFFF)
> +#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000F000)
> +#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000F001)
> +#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000F002)
> +#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000F003)
> +#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000F004)
> +#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000F005)
> +
> +/**** Defines for FaultCodeAdditionalInfo registers ****/
> +#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001C14)
> +#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001C18)
> +#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001C1C)
> +
> +/**** Defines for HCBAddress register ****/
> +#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001C30)
> +#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001C34)
> +
> +/**** Defines for HCBSize register ****/
> +#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001C38)
> +#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xFFFFF000)
> +#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12)
> +#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001)
> +
> +/**** Defines for ReplyFreeHostIndex register ****/
> +#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001C40)
> +
> +/**** Defines for SenseBufferFreeHostIndex register ****/
> +#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001C44)
> +
> +/**** Defines for DiagRWData register ****/
> +#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001C50)
> +#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001C54)
> +
> +/**** Defines for DiagRWAddress ****/
> +#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001C58)
> +#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001C5C)
> +
> +/**** Defines for DiagRWControl register ****/
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001C60)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001)
> +
> +/**** Defines for DiagRWStatus register ****/
> +#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001C62)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000E)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001)
> +
> +/**** Defines for Scratchpad registers ****/
> +#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001CF0)
> +#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001CF4)
> +#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001CF8)
> +#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001CFC)
> +
> +/**** Defines for Device Assigned registers ****/
> +#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000)
> +
> +/**** Default Defines for Diag Save Timeout ****/
> +#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60) /* seconds */
> +
> +/*****************************************************************************
> + * Reply Descriptors *
> + ****************************************************************************/
> +
> +/*****************************************************************************
> + * Default Reply Descriptor *
> + ****************************************************************************/
> +typedef struct _MPI3_DEFAULT_REPLY_DESCRIPTOR {
> + U32 DescriptorTypeDependent1[2]; /* 0x00 */
> + U16 RequestQueueCI; /* 0x08 */
> + U16 RequestQueueID; /* 0x0A */
> + U16 DescriptorTypeDependent2; /* 0x0C */
> + U16 ReplyFlags; /* 0x0E */
> +} MPI3_DEFAULT_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY_DESCRIPTOR,
> + Mpi3DefaultReplyDescriptor_t, MPI3_POINTER pMpi3DefaultReplyDescriptor_t;
> +
> +/**** Defines for the ReplyFlags field ****/
> +#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xF000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000)
> +
> +/*****************************************************************************
> + * Address Reply Descriptor *
> + ****************************************************************************/
> +typedef struct _MPI3_ADDRESS_REPLY_DESCRIPTOR {
> + U64 ReplyFrameAddress; /* 0x00 */
> + U16 RequestQueueCI; /* 0x08 */
> + U16 RequestQueueID; /* 0x0A */
> + U16 Reserved0C; /* 0x0C */
> + U16 ReplyFlags; /* 0x0E */
> +} MPI3_ADDRESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_ADDRESS_REPLY_DESCRIPTOR,
> + Mpi3AddressReplyDescriptor_t, MPI3_POINTER pMpi3AddressReplyDescriptor_t;
> +
> +/*****************************************************************************
> + * Success Reply Descriptor *
> + ****************************************************************************/
> +typedef struct _MPI3_SUCCESS_REPLY_DESCRIPTOR {
> + U32 Reserved00[2]; /* 0x00 */
> + U16 RequestQueueCI; /* 0x08 */
> + U16 RequestQueueID; /* 0x0A */
> + U16 HostTag; /* 0x0C */
> + U16 ReplyFlags; /* 0x0E */
> +} MPI3_SUCCESS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_SUCCESS_REPLY_DESCRIPTOR,
> + Mpi3SuccessReplyDescriptor_t, MPI3_POINTER pMpi3SuccessReplyDescriptor_t;
> +
> +/*****************************************************************************
> + * Target Command Buffer Reply Descriptor *
> + ****************************************************************************/
> +typedef struct _MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
> + U32 Reserved00; /* 0x00 */
> + U16 InitiatorDevHandle; /* 0x04 */
> + U8 PhyNum; /* 0x06 */
> + U8 Reserved07; /* 0x07 */
> + U16 RequestQueueCI; /* 0x08 */
> + U16 RequestQueueID; /* 0x0A */
> + U16 IOIndex; /* 0x0C */
> + U16 ReplyFlags; /* 0x0E */
> +} MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
> + Mpi3TargetCommandBufferReplyDescriptor_t, MPI3_POINTER pMpi3TargetCommandBufferReplyDescriptor_t;
> +
> +/**** See Default Reply Descriptor Defines above for definitions in the ReplyFlags field ****/
> +
> +/*****************************************************************************
> + * Status Reply Descriptor *
> + ****************************************************************************/
> +typedef struct _MPI3_STATUS_REPLY_DESCRIPTOR {
> + U16 IOCStatus; /* 0x00 */
> + U16 Reserved02; /* 0x02 */
> + U32 IOCLogInfo; /* 0x04 */
> + U16 RequestQueueCI; /* 0x08 */
> + U16 RequestQueueID; /* 0x0A */
> + U16 HostTag; /* 0x0C */
> + U16 ReplyFlags; /* 0x0E */
> +} MPI3_STATUS_REPLY_DESCRIPTOR, MPI3_POINTER PTR_MPI3_STATUS_REPLY_DESCRIPTOR,
> + Mpi3StatusReplyDescriptor_t, MPI3_POINTER pMpi3StatusReplyDescriptor_t;
> +
> +/**** Defines for the IOCStatus field ****/
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7FFF)
> +
> +/**** Defines for the IOCLogInfo field ****/
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xF0000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0FFFFFFF)
> +
> +/*****************************************************************************
> + * Union of Reply Descriptors *
> + ****************************************************************************/
> +typedef union _MPI3_REPLY_DESCRIPTORS_UNION {
> + MPI3_DEFAULT_REPLY_DESCRIPTOR Default;
> + MPI3_ADDRESS_REPLY_DESCRIPTOR AddressReply;
> + MPI3_SUCCESS_REPLY_DESCRIPTOR Success;
> + MPI3_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
> + MPI3_STATUS_REPLY_DESCRIPTOR Status;
> + U32 Words[4];
> +} MPI3_REPLY_DESCRIPTORS_UNION, MPI3_POINTER PTR_MPI3_REPLY_DESCRIPTORS_UNION,
> + Mpi3ReplyDescriptorsUnion_t, MPI3_POINTER pMpi3ReplyDescriptorsUnion_t;
> +
> +
> +/*****************************************************************************
> + * Scatter Gather Elements *
> + ****************************************************************************/
> +
> +/*****************************************************************************
> + * Common structure for Simple, Chain, and Last Chain *
> + * scatter gather elements *
> + ****************************************************************************/
> +typedef struct _MPI3_SGE_COMMON {
> + U64 Address; /* 0x00 */
> + U32 Length; /* 0x08 */
> + U8 Reserved0C[3]; /* 0x0C */
> + U8 Flags; /* 0x0F */
> +} MPI3_SGE_SIMPLE, MPI3_POINTER PTR_MPI3_SGE_SIMPLE,
> + Mpi3SGESimple_t, MPI3_POINTER pMpi3SGESimple_t,
> + MPI3_SGE_CHAIN, MPI3_POINTER PTR_MPI3_SGE_CHAIN,
> + Mpi3SGEChain_t, MPI3_POINTER pMpi3SGEChain_t,
> + MPI3_SGE_LAST_CHAIN, MPI3_POINTER PTR_MPI3_SGE_LAST_CHAIN,
> + Mpi3SGELastChain_t, MPI3_POINTER pMpi3SGELastChain_t;
> +
> +/*****************************************************************************
> + * Bit Bucket scatter gather element *
> + ****************************************************************************/
> +typedef struct _MPI3_SGE_BIT_BUCKET {
> + U64 Reserved00; /* 0x00 */
> + U32 Length; /* 0x08 */
> + U8 Reserved0C[3]; /* 0x0C */
> + U8 Flags; /* 0x0F */
> +} MPI3_SGE_BIT_BUCKET, MPI3_POINTER PTR_MPI3_SGE_BIT_BUCKET,
> + Mpi3SGEBitBucket, MPI3_POINTER pMpi3SGEBitBucket;
> +
> +/*****************************************************************************
> + * Extended EEDP scatter gather element *
> + ****************************************************************************/
> +typedef struct _MPI3_SGE_EXTENDED_EEDP {
> + U8 UserDataSize; /* 0x00 */
> + U8 Reserved01; /* 0x01 */
> + U16 EEDPFlags; /* 0x02 */
> + U32 SecondaryReferenceTag; /* 0x04 */
> + U16 SecondaryApplicationTag; /* 0x08 */
> + U16 ApplicationTagTranslationMask; /* 0x0A */
> + U16 Reserved0C; /* 0x0C */
> + U8 ExtendedOperation; /* 0x0E */
> + U8 Flags; /* 0x0F */
> +} MPI3_SGE_EXTENDED_EEDP, MPI3_POINTER PTR_MPI3_SGE_EXTENDED_EEDP,
> + Mpi3SGEExtendedEEDP_t, MPI3_POINTER pMpi3SGEExtendedEEDP_t;
> +
> +/*****************************************************************************
> + * Union of scatter gather elements *
> + ****************************************************************************/
> +typedef union _MPI3_SGE_UNION {
> + MPI3_SGE_SIMPLE Simple;
> + MPI3_SGE_CHAIN Chain;
> + MPI3_SGE_LAST_CHAIN LastChain;
> + MPI3_SGE_BIT_BUCKET BitBucket;
> + MPI3_SGE_EXTENDED_EEDP Eedp;
> + U32 Words[4];
> +} MPI3_SGE_UNION, MPI3_POINTER PTR_MPI3_SGE_UNION,
> + Mpi3SGEUnion_t, MPI3_POINTER pMpi3SGEUnion_t;
> +
> +/**** Definitions for the Flags field ****/
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xF0)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xF0)
> +#define MPI3_SGE_FLAGS_END_OF_LIST (0x08)
> +#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04)
> +#define MPI3_SGE_FLAGS_DLAS_MASK (0x03)
> +#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00)
> +#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01)
> +#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02)
> +
> +/**** Definitions for the ExtendedOperation field of Extended element ****/
> +#define MPI3_SGE_EXT_OPER_EEDP (0x00)
> +
> +/**** Definitions for the EEDPFlags field of Extended EEDP element ****/
> +#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000)
> +#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000)
> +#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000)
> +#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000)
> +#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800)
> +#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400)
> +#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200)
> +#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100)
> +#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00C0)
> +#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040)
> +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080)
> +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00C0)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020)
> +#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008)
> +#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007)
> +#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001)
> +#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003)
> +#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004)
> +#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007)
> +
> +/**** Definitions for the UserDataSize field of Extended EEDP element ****/
> +#define MPI3_EEDP_UDS_512 (0x01)
> +#define MPI3_EEDP_UDS_520 (0x02)
> +#define MPI3_EEDP_UDS_4080 (0x03)
> +#define MPI3_EEDP_UDS_4088 (0x04)
> +#define MPI3_EEDP_UDS_4096 (0x05)
> +#define MPI3_EEDP_UDS_4104 (0x06)
> +#define MPI3_EEDP_UDS_4160 (0x07)
> +
> +/*****************************************************************************
> + * Standard Message Structures *
> + ****************************************************************************/
> +
> +/*****************************************************************************
> + * Request Message Header for all request messages *
> + ****************************************************************************/
> +typedef struct _MPI3_REQUEST_HEADER {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 ChangeCount; /* 0x08 */
> + U16 FunctionDependent; /* 0x0A */
> +} MPI3_REQUEST_HEADER, MPI3_POINTER PTR_MPI3_REQUEST_HEADER,
> + Mpi3RequestHeader_t, MPI3_POINTER pMpi3RequestHeader_t;
> +
> +/*****************************************************************************
> + * Default Reply *
> + ****************************************************************************/
> +typedef struct _MPI3_DEFAULT_REPLY {
> + U16 HostTag; /* 0x00 */
> + U8 IOCUseOnly02; /* 0x02 */
> + U8 Function; /* 0x03 */
> + U16 IOCUseOnly04; /* 0x04 */
> + U8 IOCUseOnly06; /* 0x06 */
> + U8 MsgFlags; /* 0x07 */
> + U16 IOCUseOnly08; /* 0x08 */
> + U16 IOCStatus; /* 0x0A */
> + U32 IOCLogInfo; /* 0x0C */
> +} MPI3_DEFAULT_REPLY, MPI3_POINTER PTR_MPI3_DEFAULT_REPLY,
> + Mpi3DefaultReply_t, MPI3_POINTER pMpi3DefaultReply_t;
> +
> +/**** Defines for the HostTag field ****/
> +#define MPI3_HOST_TAG_INVALID (0xFFFF)
> +
> +/**** Defines for message Function ****/
> +/* I/O Controller functions */
> +#define MPI3_FUNCTION_IOC_FACTS (0x01) /* IOC Facts */
> +#define MPI3_FUNCTION_IOC_INIT (0x02) /* IOC Init */
> +#define MPI3_FUNCTION_PORT_ENABLE (0x03) /* Port Enable */
> +#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04) /* Event Notification */
> +#define MPI3_FUNCTION_EVENT_ACK (0x05) /* Event Acknowledge */
> +#define MPI3_FUNCTION_CI_DOWNLOAD (0x06) /* Component Image Download */
> +#define MPI3_FUNCTION_CI_UPLOAD (0x07) /* Component Image Upload */
> +#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08) /* IO Unit Control */
> +#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09) /* Persistent Event Log */
> +#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0A) /* Management Passthrough */
> +#define MPI3_FUNCTION_CONFIG (0x10) /* Configuration */
> +
> +/* SCSI Initiator I/O functions */
> +#define MPI3_FUNCTION_SCSI_IO (0x20) /* SCSI IO */
> +#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21) /* SCSI Task Management */
> +#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22) /* SMP Passthrough */
> +#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24) /* NVMe Encapsulated */
> +
> +/* SCSI Target I/O functions */
> +#define MPI3_FUNCTION_TARGET_ASSIST (0x30) /* Target Assist */
> +#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31) /* Target Status Send */
> +#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32) /* Target Mode Abort */
> +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33) /* Target Command Buffer Post Base */
> +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34) /* Target Command Buffer Post List */
> +
> +/* Queue Management functions */
> +#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70) /* Create an operational request queue */
> +#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71) /* Delete an operational request queue */
> +#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72) /* Create an operational reply queue */
> +#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73) /* Delete an operational reply queue */
> +
> +/* Diagnostic Tools */
> +#define MPI3_FUNCTION_TOOLBOX (0x80) /* Toolbox */
> +#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81) /* Post a Diagnostic Buffer to the I/O Unit */
> +#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82) /* Manage a Diagnostic Buffer */
> +#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83) /* Upload a Diagnostic Buffer */
> +
> +/* Miscellaneous functions */
> +#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xC0) /* Beginning of IOC Use Only range of function codes */
> +#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xEF) /* End of IOC Use Only range of function codes */
> +#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* Beginning of the product-specific range of function codes */
> +#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* End of the product-specific range of function codes */
> +
> +/**** Defines for IOCStatus ****/
> +#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000)
> +#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000)
> +#define MPI3_IOCSTATUS_STATUS_MASK (0x7FFF)
> +
> +/* Common IOCStatus values for all replies */
> +#define MPI3_IOCSTATUS_SUCCESS (0x0000)
> +#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001)
> +#define MPI3_IOCSTATUS_BUSY (0x0002)
> +#define MPI3_IOCSTATUS_INVALID_SGL (0x0003)
> +#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004)
> +#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
> +#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007)
> +#define MPI3_IOCSTATUS_INVALID_STATE (0x0008)
> +#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000A)
> +#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000B)
> +#define MPI3_IOCSTATUS_FAILURE (0x001F)
> +
> +/* Config IOCStatus values */
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
> +#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
> +#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
> +
> +/* SCSI IO IOCStatus values */
> +#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
> +#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041)
> +#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
> +#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
> +#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
> +#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
> +#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
> +#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
> +#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
> +#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
> +#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
> +#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
> +#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
> +
> +/* SCSI Initiator and SCSI Target end-to-end data protection values */
> +#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
> +#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
> +#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
> +
> +/* SCSI Target IOCStatus values */
> +#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
> +#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063)
> +#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
> +#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
> +#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
> +#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
> +#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
> +#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
> +#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
> +#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
> +
> +/* Serial Attached SCSI IOCStatus values */
> +#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
> +#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
> +
> +/* Diagnostic Buffer Post/Release IOCStatus values */
> +#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
> +
> +/* Component Image Upload/Download */
> +#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00B0)
> +#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00B1)
> +#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00B2)
> +#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00B3)
> +
> +/* Security values */
> +#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00C0)
> +
> +/* Request and Reply Queues related IOCStatus values */
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0F00)
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0F01)
> +#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0F02)
> +#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0F03)
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0F04)
> +
> +/**** Defines for IOCLogInfo ****/
> +#define MPI3_IOCLOGINFO_TYPE_MASK (0xF0000000)
> +#define MPI3_IOCLOGINFO_TYPE_SHIFT (28)
> +#define MPI3_IOCLOGINFO_TYPE_NONE (0x0)
> +#define MPI3_IOCLOGINFO_TYPE_SAS (0x3)
> +#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
> +
> +#endif /* MPI30_TRANSPORT_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_type.h b/drivers/scsi/mpi3mr/mpi/mpi30_type.h
> new file mode 100644
> index 000000000000..fbd37288a5d0
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_type.h
> @@ -0,0 +1,47 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2020 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_type.h
> + * Description: MPI basic type definitions
> + * Creation Date: 10/07/2016
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_TYPE_H
> +#define MPI30_TYPE_H 1
> +
> +/*****************************************************************************
> + * Define MPI3_POINTER if it has not already been defined. By default *
> + * MPI3_POINTER is defined to be a near pointer. MPI3_POINTER can be defined *
> + * as a far pointer by defining MPI3_POINTER as "far *" before this header *
> + * file is included. *
> + ****************************************************************************/
> +#ifndef MPI3_POINTER
> +#define MPI3_POINTER *
> +#endif /* MPI3_POINTER */
> +
> +/* The basic types may have already been included by mpi_type.h or mpi2_type.h*/
> +#if !defined(MPI_TYPE_H) && !defined(MPI2_TYPE_H)
> +/*****************************************************************************
> +*
> +* Basic Types
> +*
> +*****************************************************************************/
> +
> +typedef u8 U8;
> +typedef __le16 U16;
> +typedef __le32 U32;
> +typedef __le64 U64 __aligned(4);
> +
> +/*****************************************************************************
> +*
> +* Pointer Types
> +*
> +*****************************************************************************/
> +
> +typedef U8 * PU8;
> +typedef U16 * PU16;
> +typedef U32 * PU32;
> +typedef U64 * PU64;
> +#endif /* MPI_TYPE_H && MPI2_TYPE_H */
> +#endif /* MPI30_TYPE_H */
>
