Re: [bug report] shared tags causes IO hang and performance drop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 14, 2021 at 07:29:07PM +0530, Kashyap Desai wrote:
> > > I tried both - 5.12.0-rc1 and 5.11.0-rc2+ and there is a same
> behavior.
> > > Let me also check  megaraid_sas and see if anything generic or this is
> > > a special case of scsi_debug.
> >
> > As I mentioned, it could be one generic issue wrt. SCHED_RESTART.
> > shared tags might have to restart all hctx since all share same tags.
> 
> Ming - I tried many combination on MR shared host tag driver but there is
> no single instance of IO hang.
> I will keep trying, but when I look at scsi_debug driver code I found
> below odd settings in scsi_debug driver.
> can_queue of adapter is set to 128 but queue_depth of sdev is set to 255.
> 
> If I apply below patch, scsi_debug driver's hang is also resolved. Ideally
> sdev->queue depth cannot exceed shost->can_queue.
> Not sure why cmd_per_lun is 255 in scsi_debug driver which can easily
> exceed can_queue.  I will simulate something similar in MR driver and see
> how it behaves w.r.t IO hang issue.
> 
> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
> index 70165be10f00..dded762540ee 100644
> --- a/drivers/scsi/scsi_debug.c
> +++ b/drivers/scsi/scsi_debug.c
> @@ -218,7 +218,7 @@ static const char *sdebug_version_date = "20200710";
>   */
>  #define SDEBUG_CANQUEUE_WORDS  3       /* a WORD is bits in a long */
>  #define SDEBUG_CANQUEUE  (SDEBUG_CANQUEUE_WORDS * BITS_PER_LONG)
> -#define DEF_CMD_PER_LUN  255
> +#define DEF_CMD_PER_LUN  SDEBUG_CANQUEUE
> 
>  /* UA - Unit Attention; SA - Service Action; SSU - Start Stop Unit */
>  #define F_D_IN                 1       /* Data-in command (e.g. READ) */
> @@ -7558,6 +7558,7 @@ static int sdebug_driver_probe(struct device *dev)
>         sdbg_host = to_sdebug_host(dev);
> 
>         sdebug_driver_template.can_queue = sdebug_max_queue;
> +       sdebug_driver_template.cmd_per_lun = sdebug_max_queue;
>         if (!sdebug_clustering)
>                 sdebug_driver_template.dma_boundary = PAGE_SIZE - 1;

Yeah, the change makes the issue disappear. That looks scsi's restart
(scsi_run_queue_async<-scsi_end_request) finally restarts the queue.


Thanks,
Ming




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux