[PATCH 19/20] target: Fix several format specifiers

[Bart Van Assche <bvanassche@xxxxxxx>]

Use format specifier '%u' to format the u32 and int data types instead of
'%hu'.

Cc: Mike Christie <michael.christie@xxxxxxxxxx>
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
 drivers/target/target_core_configfs.c | 6 +++---
 drivers/target/target_core_pr.c       | 6 ++----
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 9cb1ca8421c8..01005a9e5128 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -2746,7 +2746,7 @@ static ssize_t target_tg_pt_gp_alua_access_state_store(struct config_item *item,
 
 	if (!tg_pt_gp->tg_pt_gp_valid_id) {
 		pr_err("Unable to do implicit ALUA on non valid"
-			" tg_pt_gp ID: %hu\n", tg_pt_gp->tg_pt_gp_valid_id);
+			" tg_pt_gp ID: %u\n", tg_pt_gp->tg_pt_gp_valid_id);
 		return -EINVAL;
 	}
 	if (!target_dev_configured(dev)) {
@@ -2798,7 +2798,7 @@ static ssize_t target_tg_pt_gp_alua_access_status_store(
 
 	if (!tg_pt_gp->tg_pt_gp_valid_id) {
 		pr_err("Unable to do set ALUA access status on non"
-			" valid tg_pt_gp ID: %hu\n",
+			" valid tg_pt_gp ID: %u\n",
 			tg_pt_gp->tg_pt_gp_valid_id);
 		return -EINVAL;
 	}
@@ -2853,7 +2853,7 @@ static ssize_t target_tg_pt_gp_alua_support_##_name##_store(		\
 									\
 	if (!t->tg_pt_gp_valid_id) {					\
 		pr_err("Unable to do set " #_name " ALUA state on non"	\
-		       " valid tg_pt_gp ID: %hu\n",			\
+		       " valid tg_pt_gp ID: %u\n",			\
 		       t->tg_pt_gp_valid_id);				\
 		return -EINVAL;						\
 	}								\
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index d61dc166bc5f..6fd5fec95539 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1637,8 +1637,7 @@ core_scsi3_decode_spec_i_port(
 			}
 
 			dest_tpg = tmp_tpg;
-			pr_debug("SPC-3 PR SPEC_I_PT: Located %s Node:"
-				" %s Port RTPI: %hu\n",
+			pr_debug("SPC-3 PR SPEC_I_PT: Located %s Node: %s Port RTPI: %u\n",
 				dest_tpg->se_tpg_tfo->fabric_name,
 				dest_node_acl->initiatorname, dest_rtpi);
 
@@ -1675,8 +1674,7 @@ core_scsi3_decode_spec_i_port(
 		dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl,
 					dest_rtpi);
 		if (!dest_se_deve) {
-			pr_err("Unable to locate %s dest_se_deve"
-				" from destination RTPI: %hu\n",
+			pr_err("Unable to locate %s dest_se_deve from destination RTPI: %u\n",
 				dest_tpg->se_tpg_tfo->fabric_name,
 				dest_rtpi);