[PATCH 5/6] scsi: hisi_sas: Warn in v3 hw channel interrupt handler when status reg cleared

[John Garry <john.garry@xxxxxxxxxx>]

From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>

If a channel interrupt occurs without any status bit set, the handler will
return directly. However, if such redundant interrupts are received, it's
better to check what happen, so add logs for this.

Signed-off-by: Yihang Li <liyihang6@xxxxxxxxxxxxx>
Signed-off-by: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0927b0b30b29..499c770d405c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1718,8 +1718,11 @@ static void handle_chl_int1_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 	int i;
 
 	irq_value &= ~irq_msk;
-	if (!irq_value)
+	if (!irq_value) {
+		dev_warn(dev, "phy%d channel int 1 received with status bits cleared\n",
+			 phy_no);
 		return;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(port_axi_error); i++) {
 		const struct hisi_sas_hw_error *error = &port_axi_error[i];
@@ -1780,8 +1783,11 @@ static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 			BIT(CHL_INT2_RX_INVLD_DW_OFF);
 
 	irq_value &= ~irq_msk;
-	if (!irq_value)
+	if (!irq_value) {
+		dev_warn(dev, "phy%d channel int 2 received with status bits cleared\n",
+			 phy_no);
 		return;
+	}
 
 	if (irq_value & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
 		dev_warn(dev, "phy%d identify timeout\n", phy_no);
-- 
2.26.2