On Wed, 2007-04-04 at 16:56 -0700, Ed Lin wrote:
> The correct internal mapping of stex controllers should be:
> id:0~15, lun:0~7 (st_shasta)
> id:0, lun:0~127 (st_yosemite)
> id:0~127, lun:0 (st_vsc and st_vsc1)
>
> Unfortunately we can not use the internal id/lun as scsi
> mid layer id/lun. The Linux kernel has a config option
> CONFIG_SCSI_MULTI_LUN. This option is not selected
> in some major Linux releases. If it is not selected,
> then st_shasta can expose 16 LDs(logical drive)
> at most, while st_yosemite can expose only one LD.
> This is clearly unacceptable.
Erm, there's a simple way out of this: That's the BLIST_FORCELUN
option. This is why most of the RAID devices have entries in
scsi_devinfo.c like:
{"ADAPTEC", "AACRAID", NULL, BLIST_FORCELUN},
Which overrides the CONFIG_SCSI_MULTI_LUN setting for the particular
device. We can easily add an entry for stex as well.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
