On Tue, 2021-03-23 at 15:47 +0800, lixiaokeng wrote:
>
> On 2021/3/22 22:22, Mike Snitzer wrote:
> > On Mon, Mar 22 2021 at 4:11am -0400,
> > Christoph Hellwig <hch@xxxxxxxxxxxxx> wrote:
> >
> > > On Sat, Mar 20, 2021 at 03:19:23PM +0800, Zhiqiang Liu wrote:
> > > > From: Zhiqiang Liu <liuzhiqiang26@xxxxxxxxxx>
> > > >
> > > > When we make IO stress test on multipath device, there will
> > > > be a metadata err because of wrong path. In the test, we
> > > > concurrent execute 'iscsi device login|logout' and
> > > > 'multipath -r' command with IO stress on multipath device.
> > > > In some case, systemd-udevd may have not time to process
> > > > uevents of iscsi device logout|login, and then 'multipath -r'
> > > > command triggers multipathd daemon calls ioctl to load table
> > > > with incorrect old device info from systemd-udevd.
> > > > Then, one iscsi path may be incorrectly attached to another
> > > > multipath which has different uuid. Finally, the metadata err
> > > > occurs when umounting filesystem to down write metadata on
> > > > the iscsi device which is actually not owned by the multipath
> > > > device.
> > > >
> > > > So we need to check whether all pgpaths of one multipath have
> > > > the same uuid, if not, we should throw a error.
> > > >
> > > > Signed-off-by: Zhiqiang Liu <liuzhiqiang26@xxxxxxxxxx>
> > > > Signed-off-by: lixiaokeng <lixiaokeng@xxxxxxxxxx>
> > > > Signed-off-by: linfeilong <linfeilong@xxxxxxxxxx>
> > > > Signed-off-by: Wubo <wubo40@xxxxxxxxxx>
> > > > ---
> > > > drivers/md/dm-mpath.c | 52
> > > > +++++++++++++++++++++++++++++++++++++++++
> > > > drivers/scsi/scsi_lib.c | 1 +
> > > > 2 files changed, 53 insertions(+)
> > > >
> > > > diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
> > > > index bced42f082b0..f0b995784b53 100644
> > > > --- a/drivers/md/dm-mpath.c
> > > > +++ b/drivers/md/dm-mpath.c
> > > > @@ -24,6 +24,7 @@
> > > > #include <linux/workqueue.h>
> > > > #include <linux/delay.h>
> > > > #include <scsi/scsi_dh.h>
> > > > +#include <linux/dm-ioctl.h>
> > > > #include <linux/atomic.h>
> > > > #include <linux/blk-mq.h>
> > > >
> > > > @@ -1169,6 +1170,45 @@ static int parse_features(struct
> > > > dm_arg_set *as, struct multipath *m)
> > > > return r;
> > > > }
> > > >
> > > > +#define SCSI_VPD_LUN_ID_PREFIX_LEN 4
> > > > +#define MPATH_UUID_PREFIX_LEN 7
> > > > +static int check_pg_uuid(struct priority_group *pg, char
> > > > *md_uuid)
> > > > +{
> > > > + char pgpath_uuid[DM_UUID_LEN] = {0};
> > > > + struct request_queue *q;
> > > > + struct pgpath *pgpath;
> > > > + struct scsi_device *sdev;
> > > > + ssize_t count;
> > > > + int r = 0;
> > > > +
> > > > + list_for_each_entry(pgpath, &pg->pgpaths, list) {
> > > > + q = bdev_get_queue(pgpath->path.dev->bdev);
> > > > + sdev = scsi_device_from_queue(q);
> > >
> > > Common dm-multipath code should never poke into scsi
> > > internals. This
> > > is something for the device handler to check. It probably also
> > > won't
> > > work for all older devices.
> >
> > Definitely.
> >
> > But that aside, userspace (multipathd) _should_ be able to do extra
> > validation, _before_ pushing down a new table to the kernel, rather
> > than
> > forcing the kernel to do it.
> >
>
> Martin (committer of multipath-tools) said that:
> "Don't get me wrong, I don't argue against tough testing. But we
> should
> be aware that there are always time intervals during which
> multipathd's
> picture of the present devices is different from what the kernel
> sees."
>
> It is difficult to solve this in multipathd.
>
> Regards,
> Lixiaokeng
>
I think the patch is no good. There are plenty of devices that don't
support VPD page 83h:
int scsi_vpd_lun_id(struct scsi_device *sdev, char *id, size_t id_len)
{
u8 cur_id_type = 0xff;
u8 cur_id_size = 0;
unsigned char *d, *cur_id_str;
unsigned char __rcu *vpd_pg83;
int id_size = -EINVAL;
rcu_read_lock();
vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
if (!vpd_pg83) {
rcu_read_unlock();
return -ENXIO;
}
and the DM layer should not be looking at the properties of the
underlying devices in this way anyway. It should be pushed down
to the table.
-Ewan
