On Mon, Apr 02, 2007 at 04:29:35PM -0400, Salyzyn, Mark wrote: > Cool! Look forward to your results. > > Sorry for being so snitty sounding with the 5 minute comment, I was just > admiring the pace of activity! No problem. I thought it was funny.:) Judith > > Sincerely -- Mark Salyzyn > > > -----Original Message----- > > From: Judith Lebzelter [mailto:judith@xxxxxxxxxxxxxxxxxxxx] > > Sent: Monday, April 02, 2007 4:17 PM > > To: Salyzyn, Mark > > Cc: Judith Lebzelter; James Bottomley; > > linux-scsi@xxxxxxxxxxxxxxx; Duane Cox > > Subject: Re: [PATCH] aacraid: Panics during init time reset > > (Was: [PATCH] aacraid: [Fastboot] Panics for AACRAID driver > > during 'insmod' for kexec test) > > > > > > On Mon, Apr 02, 2007 at 03:56:50PM -0400, Salyzyn, Mark wrote: > > > Judith, another layer on this onion also discovered by Duane, the > > > interrupt enable handler also needed to be set ... The > > interrupt enable > > > was called from within the synchronous command handler. > > > > > > My private email with the fix was sent a whole 5 minutes > > ahead of yours > > > ;-> Here is the jist of it for the observers: > > > > I saw it the second I hit 'submit'. > > > > > > > > /* Failure to reset here is an option ... */ > > > dev->a_ops.adapter_sync_cmd = rx_sync_cmd; > > > + dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt; > > > dev->OIMR = status = rx_readb (dev, MUnit.OIMR); > > > > > > Yes, the disable interrupt method patched into the enable > > int platform > > > function. Later init code will reset it accordingly. > > > > > > Sincerely -- Mark Salyzyn > > > > Yes, that works now. I will run a series to check if the > > other IRQ interrupt > > problem is resolved. > > > > Judith > > > > > > > > > > > > -----Original Message----- > > > > From: Judith Lebzelter [mailto:judith@xxxxxxxxxxxxxxxxxxxx] > > > > Sent: Monday, April 02, 2007 3:44 PM > > > > To: Salyzyn, Mark > > > > Cc: Judith Lebzelter; James Bottomley; > > > > linux-scsi@xxxxxxxxxxxxxxx; Duane Cox > > > > Subject: Re: [PATCH] aacraid: Panics during init time reset > > > > (Was: [PATCH] aacraid: [Fastboot] Panics for AACRAID driver > > > > during 'insmod' for kexec test) > > > > > > > > > > > > On Mon, Apr 02, 2007 at 02:34:36PM -0400, Salyzyn, Mark wrote: > > > > > Duane discovered in the scsi-misc-2.6 code that the reset > > > > handler could > > > > > be called without the sync command handler set up resulting > > > > in a panic. > > > > > Judith discovered this issue within minutes and has > > > > recently reported > > > > > it. Here is a fix. > > > > > > > > Mark, > > > > > > > > I applied this patch and ran a kexec test again and I still > > > > got a panic: > > > > > > > > Loading aacraid.Adaptec aacraid driver (1.1-5[2437]-mh4)^M > > > > ko module^M > > > > ACPI: PCI Interrupt 0000:03:0e.0[A] -> Link [LNKC] -> GSI 3 > > > > (level, low) -> IRQ 3^M > > > > Unable to handle kernel NULL pointer dereference at > > > > 0000000000000000 RIP: ^M > > > > [<0000000000000000>]^M > > > > PGD 4791067 PUD 473c067 PMD 0 ^M > > > > Oops: 0010 [1] ^M > > > > CPU 0 ^M > > > > Modules linked in: aacraid^M > > > > Pid: 977, comm: insmod Not tainted 2.6.21-rc3-kdump #1^M > > > > RIP: 0010:[<0000000000000000>] [<0000000000000000>]^M > > > > RSP: 0000:ffff81000474dbf0 EFLAGS: 00010246^M > > > > RAX: ffffc20000010000 RBX: ffff810004fe4cd8 RCX: > > 000000005b540e96^M > > > > RDX: ffffc20000010000 RSI: ffff81000443cf40 RDI: > > ffff810004fe4cd8^M > > > > RBP: 00000000fffee138 R08: ffffffff81001c20 R09: > > ffffffff8143593e^M > > > > R10: ffff810004c537a0 R11: 0000000000000000 R12: > > ffff81000474dc7c^M > > > > R13: 0000000000000000 R14: 0000000000000000 R15: > > 0000000000000000^M > > > > FS: 000000000057b850(0063) GS:ffffffff814d6000(0000) > > > > knlGS:0000000000000000^M > > > > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b^M > > > > CR2: 0000000000000000 CR3: 0000000004745000 CR4: > > 00000000000006e0^M > > > > Process insmod (pid: 977, threadinfo ffff81000474c000, task > > > > ffff81000443cf40)^M > > > > Stack: ffffffff88008e82 00003e00fc1f0000 0000000000000000 > > > > ffff810004fe4cd8^M > > > > ffff810004fe4800 0000000000000000 ffffffff8800a6dd > > 0000000000000032^M > > > > ffffffff88008c3b 0000000000000000 ffffffff00000000 > > ffff81000474dc7c^M > > > > Call Trace:^M > > > > [<ffffffff88008e82>] :aacraid:rx_sync_cmd+0x15c/0x16a^M > > > > [<ffffffff88008c3b>] :aacraid:aac_rx_restart_adapter+0x7e/0x169^M > > > > [<ffffffff88009121>] :aacraid:_aac_rx_init+0x7b/0x2fc^M > > > > [<ffffffff88002b1f>] :aacraid:aac_probe_one+0x1a2/0x457^M > > > > [<ffffffff8112be3d>] pci_device_probe+0x4c/0x75^M > > > > [<ffffffff8117d41e>] really_probe+0xc4/0x148^M > > > > [<ffffffff8117d64f>] __driver_attach+0x6d/0xab^M > > > > [<ffffffff8117d5e2>] __driver_attach+0x0/0xab^M > > > > [<ffffffff8117d5e2>] __driver_attach+0x0/0xab^M > > > > [<ffffffff8117c8f6>] bus_for_each_dev+0x43/0x6e^M > > > > [<ffffffff8117cc38>] bus_add_driver+0x6b/0x18d^M > > > > [<ffffffff8112bfdb>] __pci_register_driver+0x72/0xa7^M > > > > [<ffffffff8801203a>] :aacraid:aac_init+0x3a/0x75^M > > > > [<ffffffff8103bbcc>] sys_init_module+0x1195/0x12e6^M > > > > [<ffffffff8100913e>] system_call+0x7e/0x83^M > > > > ^M > > > > ^M > > > > Code: Bad RIP value.^M > > > > RIP [<0000000000000000>]^M > > > > RSP <ffff81000474dbf0>^M > > > > CR2: 0000000000000000^M > > > > > > > > There is an extra line in the call trace for the 'rx_sync_cmd'. > > > > > > > > Judith > > > > > > > > > > > > > > IMHO, this needs to be applied immediately regardless of > > > > the status of > > > > > the kexec patch as this issue is present in the > > > > scsi-misc-2.6 driver for > > > > > all existing init-time recovery actions. This patch in > > > > principal would > > > > > not be different w/o the kexec patch. > > > > > > > > > > ObligatoryDisclaimer: Please accept my condolences > > > > regarding Outlook's > > > > > handling of patches. > > > > > > > > > > This attached patch is against current scsi-misc-2.6 > > > > > > > > > > Signed-off-by: Mark Salyzyn <aacraid@xxxxxxxxxxx> > > > > > > > > > > --- > > > > > > > > > > Sincerely -- Mark Salyzyn > > > > > > > > > > > > > > - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html