Re: [PATCH 1/3] scsi: check the whole result for reading write protect flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/19/21 4:01 AM, Jason Yan wrote:
When the scsi device status is offline, mode sense command will return a
result with only DID_NO_CONNECT set. Then in sd_read_write_protect_flag(),
only status byte of the result is checked, we still consider the command
returned good, and read sdkp->write_prot from the buffer. And because of
bug [1], garbage data is copied to the buffer, the disk sometimes
be set readonly. When the scsi device is set running again, users cannot
write data to the disk.

Fix this by check the whole result returned by the driver.

[1] https://patchwork.kernel.org/project/linux-block/patch/20210318122621.330010-1-yanaijie@xxxxxxxxxx/

Signed-off-by: Jason Yan <yanaijie@xxxxxxxxxx>
---
  drivers/scsi/sd.c   |  6 +++---
  include/scsi/scsi.h | 13 +++++++++++++
  2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index ed0b1bb99f08..16f8cd2895fd 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2669,18 +2669,18 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
  		 * 5: Illegal Request, Sense Code 24: Invalid field in
  		 * CDB.
  		 */
-		if (!scsi_status_is_good(res))
+		if (!scsi_result_is_good(res))
  			res = sd_do_mode_sense(sdkp, 0, 0, buffer, 4, &data, NULL);
/*
  		 * Third attempt: ask 255 bytes, as we did earlier.
  		 */
-		if (!scsi_status_is_good(res))
+		if (!scsi_result_is_good(res))
  			res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 255,
  					       &data, NULL);
  	}
- if (!scsi_status_is_good(res)) {
+	if (!scsi_result_is_good(res)) {
  		sd_first_printk(KERN_WARNING, sdkp,
  			  "Test WP failed, assume Write Enabled\n");
  	} else {
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index e75cca25338a..db0f346a31b2 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -55,6 +55,19 @@ static inline int scsi_status_is_good(int status)
  		(status == SAM_STAT_COMMAND_TERMINATED));
  }
+/** scsi_result_is_good - check the result return.
+ *
+ * @result: the result passed up from the driver (including host and
+ *          driver components)
+ *
+ * Drivers may only set other bytes but not status byte.
+ * This checks both the status byte and other bytes.
+ */
+static inline int scsi_result_is_good(int result)
+{
+	return scsi_status_is_good(result) && (result & ~0xff) == 0;
+}
+
/*
   * standard mode-select header prepended to all mode-select commands

Reviewed-by: Hannes Reinecke <hare@xxxxxxx>

Cheers,

Hannes
--
Dr. Hannes Reinecke                Kernel Storage Architect
hare@xxxxxxx                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux