Re: [PATCH v2 5/6] qla2xxx: Simplify qla8044_minidump_process_control()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/17/21 8:28 PM, Bart Van Assche wrote:
> This patch fixes the following Coverity complaint:
> 
>     CID 177490 (#1 of 1): Unused value (UNUSED_VALUE)
>     assigned_value: Assigning value from opcode & 0xffffff7fU to opcode
>     here, but that stored value is overwritten before it can be used.
> 
> Cc: Quinn Tran <qutran@xxxxxxxxxxx>
> Cc: Mike Christie <michael.christie@xxxxxxxxxx>
> Reviewed-by: Daniel Wagner <dwagner@xxxxxxx>
> Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> ---
>  drivers/scsi/qla2xxx/qla_nx2.c | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
> index 68a16c95dcb7..792c55fcec8c 100644
> --- a/drivers/scsi/qla2xxx/qla_nx2.c
> +++ b/drivers/scsi/qla2xxx/qla_nx2.c
> @@ -2226,19 +2226,16 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  		if (opcode & QLA82XX_DBG_OPCODE_WR) {
>  			qla8044_wr_reg_indirect(vha, crb_addr,
>  			    crb_entry->value_1);
> -			opcode &= ~QLA82XX_DBG_OPCODE_WR;
>  		}
>  
>  		if (opcode & QLA82XX_DBG_OPCODE_RW) {
>  			qla8044_rd_reg_indirect(vha, crb_addr, &read_value);
>  			qla8044_wr_reg_indirect(vha, crb_addr, read_value);
> -			opcode &= ~QLA82XX_DBG_OPCODE_RW;
>  		}
>  
>  		if (opcode & QLA82XX_DBG_OPCODE_AND) {
>  			qla8044_rd_reg_indirect(vha, crb_addr, &read_value);
>  			read_value &= crb_entry->value_2;
> -			opcode &= ~QLA82XX_DBG_OPCODE_AND;
>  			if (opcode & QLA82XX_DBG_OPCODE_OR) {
>  				read_value |= crb_entry->value_3;
>  				opcode &= ~QLA82XX_DBG_OPCODE_OR;
> @@ -2249,7 +2246,6 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  			qla8044_rd_reg_indirect(vha, crb_addr, &read_value);
>  			read_value |= crb_entry->value_3;
>  			qla8044_wr_reg_indirect(vha, crb_addr, read_value);
> -			opcode &= ~QLA82XX_DBG_OPCODE_OR;
>  		}
>  		if (opcode & QLA82XX_DBG_OPCODE_POLL) {
>  			poll_time = crb_entry->crb_strd.poll_timeout;
> @@ -2269,7 +2265,6 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  					    crb_addr, &read_value);
>  				}
>  			} while (1);
> -			opcode &= ~QLA82XX_DBG_OPCODE_POLL;
>  		}
>  
>  		if (opcode & QLA82XX_DBG_OPCODE_RDSTATE) {
> @@ -2283,7 +2278,6 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  			qla8044_rd_reg_indirect(vha, addr, &read_value);
>  			index = crb_entry->crb_ctrl.state_index_v;
>  			tmplt_hdr->saved_state_array[index] = read_value;
> -			opcode &= ~QLA82XX_DBG_OPCODE_RDSTATE;
>  		}
>  
>  		if (opcode & QLA82XX_DBG_OPCODE_WRSTATE) {
> @@ -2303,7 +2297,6 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  			}
>  
>  			qla8044_wr_reg_indirect(vha, addr, read_value);
> -			opcode &= ~QLA82XX_DBG_OPCODE_WRSTATE;
>  		}
>  
>  		if (opcode & QLA82XX_DBG_OPCODE_MDSTATE) {
> @@ -2316,7 +2309,6 @@ qla8044_minidump_process_control(struct scsi_qla_host *vha,
>  			read_value |= crb_entry->value_3;
>  			read_value += crb_entry->value_1;
>  			tmplt_hdr->saved_state_array[index] = read_value;
> -			opcode &= ~QLA82XX_DBG_OPCODE_MDSTATE;
>  		}
>  		crb_addr += crb_entry->crb_strd.addr_stride;
>  	}
> 

Reviewed-by: Lee Duncan <lduncan@xxxxxxxx>




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux