[PATCH] scsi: aha1542: remove unneeded semicolon

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix the following coccicheck warnings:

./drivers/scsi/aha1542.c:569:2-3: Unneeded semicolon.
./drivers/scsi/aha1542.c:554:2-3: Unneeded semicolon.
./drivers/scsi/aha1542.c:519:2-3: Unneeded semicolon.
./drivers/scsi/aha1542.c:508:3-4: Unneeded semicolon.
./drivers/scsi/aha1542.c:407:2-3: Unneeded semicolon.

Reported-by: Abaci Robot <abaci@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
---
 drivers/scsi/aha1542.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 21aab9f5b117..6d4d7d60bfba 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -404,7 +404,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
 						 */
 		my_done(tmp_cmd);
 		number_serviced++;
-	};
+	}
 }
 
 static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
@@ -505,7 +505,7 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 		scsi_for_each_sg(cmd, sg, sg_count, i) {
 			any2scsi(acmd->chain[i].dataptr, sg_dma_address(sg));
 			any2scsi(acmd->chain[i].datalen, sg_dma_len(sg));
-		};
+		}
 		any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
 		any2scsi(ccb[mbo].dataptr, acmd->chain_handle);
 #ifdef DEBUG
@@ -516,7 +516,7 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 		ccb[mbo].op = 0;	/* SCSI Initiator Command */
 		any2scsi(ccb[mbo].datalen, 0);
 		any2scsi(ccb[mbo].dataptr, 0);
-	};
+	}
 	ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7);	/*SCSI Target Id */
 	ccb[mbo].rsalen = 16;
 	ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
@@ -551,7 +551,7 @@ static void setup_mailboxes(struct Scsi_Host *sh)
 		any2scsi(aha1542->mb[i].ccbptr,
 			 aha1542->ccb_handle + i * sizeof(struct ccb));
 		aha1542->mb[AHA1542_MAILBOXES + i].status = 0;
-	};
+	}
 	aha1542_intr_reset(sh->io_port);	/* reset interrupts, so they don't block */
 	any2scsi(mb_cmd + 2, aha1542->mb_handle);
 	if (aha1542_out(sh->io_port, mb_cmd, 5))
@@ -564,9 +564,9 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
 	u8 inquiry_result[3];
 	int i;
 	i = inb(STATUS(sh->io_port));
-	if (i & DF) {
+	if (i & DF)
 		i = inb(DATA(sh->io_port));
-	};
+
 	aha1542_outb(sh->io_port, CMD_RETCONF);
 	aha1542_in(sh->io_port, inquiry_result, 3, 0);
 	if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
-- 
2.20.1.2432.ga663e714




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux