Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:211: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:414: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:472: warning: Function parameter or member 'ireq' not described in 'scu_ssp_task_request_construct_task_context'
drivers/scsi/isci/request.c:472: warning: expecting prototype for The(). Prototype was for scu_ssp_task_request_construct_task_context() instead
drivers/scsi/isci/request.c:501: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:501: warning: expecting prototype for This method is will fill in the SCU Task Context for any type of SATA(). Prototype was for scu_sata_request_construct_task_context() instead
drivers/scsi/isci/request.c:597: warning: Cannot understand *
drivers/scsi/isci/request.c:785: warning: expecting prototype for sci_req_tx_bytes(). Prototype was for SCU_TASK_CONTEXT_SRAM() instead
drivers/scsi/isci/request.c:1399: warning: Cannot understand *
drivers/scsi/isci/request.c:1446: warning: Cannot understand *
drivers/scsi/isci/request.c:2465: warning: Function parameter or member 'task' not described in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2465: warning: Excess function parameter 'sas_task' description in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2501: warning: Function parameter or member 'task' not described in 'isci_request_set_open_reject_status'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'idev' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'task' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:3337: warning: Function parameter or member 'idev' not described in 'isci_io_request_build'
drivers/scsi/isci/request.c:3337: warning: Excess function parameter 'sci_device' description in 'isci_io_request_build'
Cc: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/scsi/isci/request.c | 58 ++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 58e62162882f2..49ab2555c0cdf 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -207,11 +207,8 @@ static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq)
SCI_CONTROLLER_INVALID_IO_TAG;
}
-/**
+/*
* This method is will fill in the SCU Task Context for any type of SSP request.
- * @sci_req:
- * @task_context:
- *
*/
static void scu_ssp_request_construct_task_context(
struct isci_request *ireq,
@@ -410,10 +407,8 @@ static void scu_ssp_ireq_dif_strip(struct isci_request *ireq, u8 type, u8 op)
tc->ref_tag_seed_gen = 0;
}
-/**
+/*
* This method is will fill in the SCU Task Context for a SSP IO request.
- * @sci_req:
- *
*/
static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq,
enum dma_data_direction dir,
@@ -456,17 +451,16 @@ static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq,
}
/**
- * This method will fill in the SCU Task Context for a SSP Task request. The
- * following important settings are utilized: -# priority ==
- * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued
- * ahead of other task destined for the same Remote Node. -# task_type ==
- * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type
- * (i.e. non-raw frame) is being utilized to perform task management. -#
- * control_frame == 1. This ensures that the proper endianess is set so
- * that the bytes are transmitted in the right order for a task frame.
- * @sci_req: This parameter specifies the task request object being
- * constructed.
- *
+ * scu_ssp_task_request_construct_task_context() - This method will fill in
+ * the SCU Task Context for a SSP Task request. The following important
+ * settings are utilized: -# priority == SCU_TASK_PRIORITY_HIGH. This
+ * ensures that the task request is issued ahead of other task destined
+ * for the same Remote Node. -# task_type == SCU_TASK_TYPE_IOREAD. This
+ * simply indicates that a normal request type (i.e. non-raw frame) is
+ * being utilized to perform task management. -#control_frame == 1. This
+ * ensures that the proper endianess is set so that the bytes are
+ * transmitted in the right order for a task frame.
+ * @ireq: This parameter specifies the task request object being constructed.
*/
static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq)
{
@@ -484,6 +478,7 @@ static void scu_ssp_task_request_construct_task_context(struct isci_request *ire
}
/**
+ * scu_sata_request_construct_task_context()
* This method is will fill in the SCU Task Context for any type of SATA
* request. This is called from the various SATA constructors.
* @sci_req: The general IO request object which is to be used in
@@ -593,9 +588,9 @@ static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq,
return SCI_SUCCESS;
}
-/**
- *
- * @sci_req: This parameter specifies the request to be constructed as an
+/*
+ * sci_stp_optimized_request_construct()
+ * @ireq: This parameter specifies the request to be constructed as an
* optimized request.
* @optimized_task_type: This parameter specifies whether the request is to be
* an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A
@@ -778,11 +773,11 @@ static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *
return status;
}
+#define SCU_TASK_CONTEXT_SRAM 0x200000
/**
* sci_req_tx_bytes - bytes transferred when reply underruns request
* @ireq: request that was terminated early
*/
-#define SCU_TASK_CONTEXT_SRAM 0x200000
static u32 sci_req_tx_bytes(struct isci_request *ireq)
{
struct isci_host *ihost = ireq->owning_controller;
@@ -1396,10 +1391,10 @@ static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_re
}
/**
- *
- * @stp_request: The request that is used for the SGL processing.
- * @data_buffer: The buffer of data to be copied.
- * @length: The length of the data transfer.
+ * sci_stp_request_pio_data_in_copy_data_buffer()
+ * @stp_req: The request that is used for the SGL processing.
+ * @data_buf: The buffer of data to be copied.
+ * @len: The length of the data transfer.
*
* Copy the data from the buffer for the length specified to the IO request SGL
* specified data region. enum sci_status
@@ -1443,8 +1438,8 @@ sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req,
}
/**
- *
- * @sci_req: The PIO DATA IN request that is to receive the data.
+ * sci_stp_request_pio_data_in_copy_data()
+ * @stp_req: The PIO DATA IN request that is to receive the data.
* @data_buffer: The buffer to copy from.
*
* Copy the data buffer to the io request data region. enum sci_status
@@ -2452,7 +2447,7 @@ sci_io_request_tc_completion(struct isci_request *ireq,
* isci_request_process_response_iu() - This function sets the status and
* response iu, in the task struct, from the request object for the upper
* layer driver.
- * @sas_task: This parameter is the task struct from the upper layer driver.
+ * @task: This parameter is the task struct from the upper layer driver.
* @resp_iu: This parameter points to the response iu of the completed request.
* @dev: This parameter specifies the linux device struct.
*
@@ -2485,6 +2480,7 @@ static void isci_request_process_response_iu(
* isci_request_set_open_reject_status() - This function prepares the I/O
* completion for OPEN_REJECT conditions.
* @request: This parameter is the completed isci_request object.
+ * @task: This parameter is the task struct from the upper layer driver.
* @response_ptr: This parameter specifies the service response for the I/O.
* @status_ptr: This parameter specifies the exec status for the I/O.
* @open_rej_reason: This parameter specifies the encoded reason for the
@@ -2509,7 +2505,9 @@ static void isci_request_set_open_reject_status(
/**
* isci_request_handle_controller_specific_errors() - This function decodes
* controller-specific I/O completion error conditions.
+ * @idev: Remote device
* @request: This parameter is the completed isci_request object.
+ * @task: This parameter is the task struct from the upper layer driver.
* @response_ptr: This parameter specifies the service response for the I/O.
* @status_ptr: This parameter specifies the exec status for the I/O.
*
@@ -3326,7 +3324,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq)
* @ihost: This parameter specifies the ISCI host object
* @request: This parameter points to the isci_request object allocated in the
* request construct function.
- * @sci_device: This parameter is the handle for the sci core's remote device
+ * @idev: This parameter is the handle for the sci core's remote device
* object that is the destination for this request.
*
* SCI_SUCCESS on successfull completion, or specific failure code.
--
2.27.0
